Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
can the cam chain slack produce failures? can the cam chain slack produce failures?
Register FAQ Calendar Today's Posts
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by George Guille, It's going to be a long 300km... Bolivian Amazon

I haven't been everywhere...
but it's on my list!


Photo by George Guille
It's going to be a long 300km...
Bolivian Amazon



Reply
Page 4 of 4 123 4
 
LinkBack Thread Tools Display Modes
  #46  
Old 31 Dec 2012
BlackDogZulu's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Oct 2008
Location: West Wales, UK
Posts: 753
I'm trying to get my head round this. If he just pushes the bike forward while idling, brakes and stalls it, then I would be looking for something electrical. Perhaps a loose connection, a trapped wire, or even a dodgy ignition switch. (I had an issue with my XT where touching either brake caused the engine to stop. I worked out in the end it was a poor connection in the main switch, and the extra load of the brake lights was causing the circuit to open. New switch cured it immediately.)

However, if the bike is stalling after a period of running when the throttle is released (and, of course, the brakes applied ...) such as when exiting a main road or coming to a junction after a faster run, then I would be looking at mixture, worn needles and/or jets, and possible air leaks.

Anyway, that's the best I think I can offer from a cold, wet climate 7500 km away.
__________________
2006 XT660R daily ride, 1994 XT600E about to be reborn, Blog: http://goingfastgettingnowhere.blogspot.com/
Reply With Quote
  #47  
Old 1 Jan 2013
Contributing Member
Veteran HUBBer
  
Join Date: Dec 2008
Location: Emsworth, UK
Posts: 109
You could have knocked the nail on the head Black Dog. The common theme appears to be applying the brakes. As you said, you had the same problem with an XT. Worth a look before tearing carbs etc apart.
Reply With Quote
  #48  
Old 2 Jan 2013
Contributing Member
HUBB regular
  
Join Date: Aug 2009
Location: The Netherlands
Posts: 98
Quote:
Originally Posted by rich7 View Post
I set the valves clearance using the H mark instead of the I mark
Did you fix this already?
Reply With Quote
  #49  
Old 2 Jan 2013
BlackDogZulu's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Oct 2008
Location: West Wales, UK
Posts: 753
Quote:
Originally Posted by Mezo View Post
Ever get that feeling someone's jerkin yer gerkin? im not falling for this one.
Could be. This is an international forum, and I am quite happy to work around language difficulties where I can. But I think I have reached the end of what I can offer here.
__________________
2006 XT660R daily ride, 1994 XT600E about to be reborn, Blog: http://goingfastgettingnowhere.blogspot.com/
Reply With Quote
  #50  
Old 4 Jan 2013
Registered Users
HUBB regular
  
Join Date: Dec 2012
Location: Caracas
Posts: 28
OK, guys, a tray to adjust the float neddle and level. I still I got the same problem. I found out something that might give somebody a clue: when I close the petcock valve it does not do stall. So it is not an electric problem.
Reply With Quote
  #51  
Old 4 Jan 2013
Registered Users
Veteran HUBBer
  
Join Date: May 2012
Location: Lithuania
Posts: 204
One question: how petcock is associated with electric stuff?
Reply With Quote
  #52  
Old 8 Jan 2013
Registered Users
HUBB regular
  
Join Date: Dec 2012
Location: Caracas
Posts: 28
I have the feeling that you doubt that my problem is real and that Im pulling somebody`s leg. Let me tell Im not. For sure we have the language barrier.

What I meant in my last post is that it is not an electric problem but a problem with the carb.
Reply With Quote
  #53  
Old 8 Jan 2013
Registered Users
Veteran HUBBer
  
Join Date: May 2012
Location: Lithuania
Posts: 204
Well, yeah, it starts to look like that after such a long discussion.

And your topic says "can the cam chain slack produce failures?", and my answer would be very short: YES! If there's slack where it is not supposed to be it not only can, but it will produce failures, and major ones, at some point. So if you do something, do it once, and do it right, or you will have to do it again.

Read your reply once again... Does that make any sense to you?
Quote:
Originally Posted by rich7 View Post
when I close the petcock valve it does not do stall. So it is not an electric problem.
Sounds to me more like "when I clap my hands my bike doesn't stall, so it is not an electric problem". How does clapping hands and bike's electricity could be related? (unless there's clapping sensors, but let's not go that deep...)

And more "it does not do stall"... So does it stall "does do stall" (grammatically incorrect but my grammar isn't perfect too), or it doesn't stall "it does not stall"???

And yeah, if I close the petcock on my bike it won't run very long too... It needs petrol to run.

I'm not trying to be harsh, I'm trying to understand what you want to say...
Reply With Quote
  #54  
Old 8 Jan 2013
Registered Users
Veteran HUBBer
  
Join Date: Mar 2007
Location: UK
Posts: 4,343
Carb problem??
Quote:
Originally Posted by Mezo View Post
Ours is an international forum as well (37 countries)

Mezo.
I'm not sure what is meant by 37 countries in this context, but you guys haven't got out of the start blocks yet for misunderstandings of language, cultural differences of approach in describing issues and how to communicate.

I read this thread more or less every day to see how the multi-cultural, multi-ethnic, multi-religious belief, multi-language (including especially those who do not use English as their native language) individuals are getting along.

Patience is needed (hang in there guys!) and it could just be an issue with the carburettor?
Flooding carb for instance?
__________________
Dave
Reply With Quote
Reply
Page 4 of 4 123 4

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
how is honda NX 250 Dominator for travel (off-road) Polly Honda Tech 6 26 Sep 2012 12:17
Stuck in Tashkent, need chain tools jparke Northern and Central Asia 16 21 Aug 2012 17:22
XT600E cam chain life? The other Paul G Yamaha Tech 5 6 May 2012 20:50
Slack Drive Chain in Peru Adelaide to Anchorage The HUBB PUB 4 20 Apr 2012 16:42
Clutch kit and Chain recommendations zcarter Yamaha Tech 9 22 Mar 2012 23:21

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

Your ad could be here, on EVERY page of the HUBB, or the whole website, or as many as you like!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.



All times are GMT +1. The time now is 12:22.

Contact Us - Horizons Unlimited Motorcycle Travellers Website - Archive - Privacy Statement - Top