Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
can the cam chain slack produce failures? can the cam chain slack produce failures?
Register FAQ Calendar Today's Posts
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Ellen Delis, Lagunas Ojos del Campo, Antofalla, Catamarca

I haven't been everywhere...
but it's on my list!


Photo by Ellen Delis,
Lagunas Ojos del Campo,
Antofalla, Catamarca



Reply
Page 2 of 4 1 2 34
 
LinkBack Thread Tools Display Modes
  #16  
Old 17 Dec 2012
Registered Users
Veteran HUBBer
  
Join Date: Apr 2008
Location: BC, sometimes
Posts: 578
Quote:
Originally Posted by rich7 View Post
Thanks for answering this fast. No. this problem started just after doing the rebuilt. I just learned a couple of things: 1 I set the valves clearance using the H mark instead of the I mark, 2 I just rode my bike with the choke out and it runs definitely better. (see my other recent post)

I remembered that when I cleaned the carb we put the position of both needles on the last marks just because my spark plug used to be black and some people recommended me to work with the needles and the jets.
I reckon your problem is jetting - too lean, probably.

Try raising the needles one notch at a time and make sure the main jets are clean and your air filters are clean. Do a plug chop after each change of needle height or jets at the relevant throttle position and check the plugs.

Just on a statistical basis, carb problems are far more frequent that cam chains jumping teeth on sprockets.... just sayin'...
Reply With Quote
  #17  
Old 17 Dec 2012
Registered Users
HUBB regular
  
Join Date: Dec 2012
Location: Caracas
Posts: 28
Thanks, one more: by plug chop, you exactly mean?
Reply With Quote
  #18  
Old 17 Dec 2012
Registered Users
Veteran HUBBer
  
Join Date: Apr 2008
Location: BC, sometimes
Posts: 578
Quote:
Originally Posted by rich7 View Post
Thanks, one more: by plug chop, you exactly mean?
Pilot jet controls fuel flow tickover-one quarter throttle.

Needle position 1/4-3/4 throttle approx.

Main jet 3/4-full throttle.

Run bike on 1-2 mile stretch at appropriate throttle opening and check spark plugs to assess mixture; should be light tan colour, not white (too lean) or black (too rick). Adjust needle position +/- jets accordingly.

I would suggest putting everything back to standard factory including the air filter and start from there; you will likely not have to do anything further.
Reply With Quote
  #19  
Old 17 Dec 2012
Registered Users
HUBB regular
  
Join Date: Dec 2012
Location: Caracas
Posts: 28
What about neddle in second carb? Should be in the the same position as the main carb?
Reply With Quote
  #20  
Old 17 Dec 2012
Registered Users
HUBB regular
  
Join Date: Dec 2012
Location: Caracas
Posts: 28
An odd thing: I took out the spark plug and is totally with black powder....??? What does this tell me??
Reply With Quote
  #21  
Old 17 Dec 2012
Registered Users
Veteran HUBBer
  
Join Date: Apr 2008
Location: BC, sometimes
Posts: 578
Quote:
Originally Posted by rich7 View Post
An odd thing: I took out the spark plug and is totally with black powder....??? What does this tell me??
Mixture it too rich or you are burning oil or you have the wrong type of spark plug in there, or possibly a mixture of all three.

What is the compression (valve clearances must be in speck) and beware automatic compression release if your bike has it?
Reply With Quote
  #22  
Old 17 Dec 2012
Registered Users
Veteran HUBBer
  
Join Date: Apr 2008
Location: BC, sometimes
Posts: 578
Quote:
Originally Posted by rich7 View Post
What about neddle in second carb? Should be in the the same position as the main carb?
I would imagine so, but I am not an expert or even very knowledgeable about dual carb set ups where there are two carbs for one cylinder.
Reply With Quote
  #23  
Old 27 Dec 2012
Registered Users
HUBB regular
  
Join Date: Dec 2012
Location: Caracas
Posts: 28
I`m happy to report that I finally managed to solve the problem posted here.

Although, a new one came up; and I`m sure it also has to do with the carb. The bike is starting properly, it keeps at idle as it should (1200 plus revs) at full throttle just fine. Now, the little mishap is that at a sudden stop it goes off, even when pressing the clutch correctly. If I stop slowly, there is no problem at all. Or if I stop suddenly but give a couple of throttle it keeps at idle as normal.

What can I check or do about it?
Reply With Quote
  #24  
Old 27 Dec 2012
Contributing Member
Veteran HUBBer
  
Join Date: Jul 2007
Location: Rockhampton, Australia
Posts: 868
Quote:
Originally Posted by TravellingStrom View Post
Mine is a different bike, but my cam chain tensioner failed to automatically move in which caused the chain to become slack and the chain to jump a few teeth

The bike stopped due to the timing being seriously out, being a Vstrom and a Vtwin, the pistones were working against eachother

I have new chainbs and tensioners on order

replace that tensioner, it will cause you problems

Cheers
TS

I will still stick by a loose chain being a problem, but I have since found mine was caused by something totally different, I still changed the chains and tensioners

My problem is here

Cheers
TS
__________________
www.travellingstrom.com
Reply With Quote
  #25  
Old 27 Dec 2012
Registered Users
Veteran HUBBer
  
Join Date: Apr 2008
Location: BC, sometimes
Posts: 578
Quote:
Originally Posted by rich7 View Post
I`m happy to report that I finally managed to solve the problem posted here.

Although, a new one came up; and I`m sure it also has to do with the carb. The bike is starting properly, it keeps at idle as it should (1200 plus revs) at full throttle just fine. Now, the little mishap is that at a sudden stop it goes off, even when pressing the clutch correctly. If I stop slowly, there is no problem at all. Or if I stop suddenly but give a couple of throttle it keeps at idle as normal.

What can I check or do about it?
So what was the problem in the end? Did resetting the carbs/jets/needle heights solve it?

Your new problem sounds like your clutch is not disengaging completely - needs adjusting.
Reply With Quote
  #26  
Old 27 Dec 2012
Registered Users
HUBB regular
  
Join Date: Dec 2012
Location: Caracas
Posts: 28
The problem was the position of the needles; I adjusted them and and that was fine.

Now, the current minor problem is happening even when I just move the bike forward and use the brakes with a sudden stop not even engaging any gear.
Reply With Quote
  #27  
Old 27 Dec 2012
Registered Users
Veteran HUBBer
  
Join Date: Apr 2008
Location: BC, sometimes
Posts: 578
Quote:
Originally Posted by rich7 View Post
The problem was the position of the needles; I adjusted them and and that was fine.

Now, the current minor problem is happening even when I just move the bike forward and use the brakes with a sudden stop not even engaging any gear.
OK, good. If the cam chain is not noisy, forget about it for now.

Now adjust the clutch exactly as per the manual - I suspect this will solve your problem.
Reply With Quote
  #28  
Old 27 Dec 2012
Registered Users
HUBB regular
  
Join Date: Dec 2012
Location: Caracas
Posts: 28
I changed the chain anyway. I think you have not read carefully or I did not express myself properly. It is not clutch related since the problem shows up even in neutral just a sudden movement makes the bike go off.
Last edited by rich7; 28 Dec 2012 at 16:07.
Reply With Quote
  #29  
Old 27 Dec 2012
Registered Users
Veteran HUBBer
  
Join Date: Apr 2008
Location: BC, sometimes
Posts: 578
Quote:
Originally Posted by rich7 View Post
I changed the chain anyway. I think you have not read carefully.
Well, funnily enough, Rich07, I do have better things to do than read every word you post on the internet.

Since my advice does not seem to be appreciated, despite the fact that following it has solved your problem to date, I'm going to refrain from further input to your issues - you can fix your own bloody bike.

Now piss off.
Reply With Quote
  #30  
Old 28 Dec 2012
Registered Users
HUBB regular
  
Join Date: Jun 2012
Location: UK
Posts: 62
Not on these pages, please
Come on, guys! Doc, that was really uncalled-for and not suitable for the best and most helpful Yam-trailbike forum out there. Kindly do us all a favour and delete that post. For the record, I'm sure I speak for more HUBB users than just myself in that we do appreciate your (usual) input.

Rich, I don't currently see your reference to changing the chain - please be more tactful when replying to helpful riders. I don't think you meant to sound rude but short lines of text can be such a blunt instrument.

Quote:
Originally Posted by Docsherlock View Post
Quote:
Originally Posted by rich7 View Post
I changed the chain anyway. I think you have not read carefully.
Well, funnily enough, Rich07, I do have better things to do than read every word you post on the internet... (The rest not constructively quotable).
Reply With Quote
Reply
Page 2 of 4 1 2 34

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
how is honda NX 250 Dominator for travel (off-road) Polly Honda Tech 6 26 Sep 2012 12:17
Stuck in Tashkent, need chain tools jparke Northern and Central Asia 16 21 Aug 2012 17:22
XT600E cam chain life? The other Paul G Yamaha Tech 5 6 May 2012 20:50
Slack Drive Chain in Peru Adelaide to Anchorage The HUBB PUB 4 20 Apr 2012 16:42
Clutch kit and Chain recommendations zcarter Yamaha Tech 9 22 Mar 2012 23:21

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

Your ad could be here, on EVERY page of the HUBB, or the whole website, or as many as you like!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.



All times are GMT +1. The time now is 08:20.

Contact Us - Horizons Unlimited Motorcycle Travellers Website - Archive - Privacy Statement - Top