Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
about to change sprockets and chain about to change sprockets and chain
Register FAQ Calendar Search Today's Posts Mark Forums Read
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Ellen Delis, Lagunas Ojos del Campo, Antofalla, Catamarca

I haven't been everywhere...
but it's on my list!


Photo by Ellen Delis,
Lagunas Ojos del Campo,
Antofalla, Catamarca



Reply
Page 2 of 5 1 2 345
 
LinkBack Thread Tools Display Modes
  #16  
Old 6 Jul 2009
Registered Users
Veteran HUBBer
  
Join Date: Dec 2008
Location: Denmark
Posts: 1,417
uh, 29 rings a bell for me, but im not certain.
Reply With Quote
  #17  
Old 6 Jul 2009
Contributing Member
Veteran HUBBer
  
Join Date: Mar 2003
Location: London,England
Posts: 358
I have a new sprocket nut and have just checked it is a 30mm socket.
I usually change the nut and washer when I replace the front sprocket the nut has a very fine thread and is only avaible from Yamaha about £6 I think.
Reply With Quote
  #18  
Old 6 Jul 2009
pottsy's Avatar
Gold Member
Veteran HUBBer
  
Join Date: May 2007
Location: london, uk.
Posts: 360
Just checked the socket - 30mm.
Reply With Quote
  #19  
Old 6 Jul 2009
Registered Users
Veteran HUBBer
  
Join Date: Jun 2009
Posts: 168
Thank you, so its 30mm then

Have you guys had a problem that the socket is hard to hold in place on the nut when you try to turn it with much force? Is that normal or do you think i need to get a new socket?
Reply With Quote
  #20  
Old 7 Jul 2009
Bobmech's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2008
Location: BOP , New Zealand
Posts: 183
It is normal for the socket to try & slip off because the nut is quite shallow.
Best to get someone else to hold the rear brake on so you can support the socket while you undo the nut.
Bob
__________________
Remember that Assumption is the mother of all f**k-ups.
Reply With Quote
  #21  
Old 7 Jul 2009
Registered Users
Veteran HUBBer
  
Join Date: Jun 2008
Location: yorkshire england
Posts: 201
i agree its a two man job to undo a tight sprocket nut , if you try to do it your self your going to end up in a painfull heap on the floor. these nuts can be very/very tight . the worst one i have known was on a 1200 bandit we had to put a 3 foot scaffalding pole on a strong arm, and stand on that , the reason was the previese owner had put some v/ strong thread lock on . good luck and be carefull. zigzag
Reply With Quote
  #22  
Old 8 Jul 2009
Registered Users
Veteran HUBBer
  
Join Date: Feb 2007
Location: Manchester
Posts: 150
To save any unnecessary struggling ( like ive done in the past and was unsuccesful) I take the right size socket to the farm next door or the garage up the road and ask them to wazz it off with their Air gun, its 2 seconds of a job and no skin off their nose, better than timber through your back wheel over swing arm trying to lock it and back brake stuff trying to crack it with a socket, bar and hammer.
__________________
Yamaha TT600RE 2004
Yamaha YZ250 2 stroke 99
Reply With Quote
  #23  
Old 8 Jul 2009
Registered Users
Veteran HUBBer
  
Join Date: Jun 2009
Posts: 168
nice tip
I just talked to my dad and he has a electrical "gun" that hammers, its for the wheel bolts on cars really but I think i can fit a 30mm socket on it.

Im gona go and get a single 30mm black "powersocket" today at the store. And since its gona be a 3.5 hours drive il pick up a torque wrench and some other sockets to improve my toolset at the same time.
Reply With Quote
  #24  
Old 10 Jul 2009
icehole's Avatar
Registered Users
HUBB regular
  
Join Date: May 2008
Location: Vermont
Posts: 29
oh boy...this awaits me soon too
__________________
89 and 88 XT600.
Reply With Quote
  #25  
Old 10 Jul 2009
Registered Users
New on the HUBB
  
Join Date: May 2009
Location: st pete fla
Posts: 3
and if the damn sprocket is fused to the splines try PB Blaster and a gear puller....

Can be a pain in the arse. I also busted a stud for the rear sprocket upon torqing.
Reply With Quote
  #26  
Old 10 Jul 2009
G600's Avatar
Registered Users
Veteran HUBBer
  
Join Date: May 2009
Posts: 235
Icehole, I would not worry too much. I removed the front sprocket a few weeks back to clean out some junk that was stuck behind it. It was easy, the engine compression was enough for me to loosen the nut. So you may have a problem ahead.. but you may not.
__________________
----------
Yamaha XT600E '01, Honda XR400 '03, Yamaha XT550 '83
Reply With Quote
  #27  
Old 11 Jul 2009
Registered Users
Veteran HUBBer
  
Join Date: Jun 2009
Posts: 168
wrong sprocket
The front sprocket nut went off easy today, all went good, i changed the rear sprocket and all, but then i was going to put on the new front sprocket and it doesnt fit!

I ordered a set on wemoto so i dont understand why the front sprocket is different. The old sprocket is wider then the new one. The new front sprocket was the same diameter and 15 tooth all seemed good but its thinner..the new front sprocket goes too far in on the axle
Reply With Quote
  #28  
Old 11 Jul 2009
G600's Avatar
Registered Users
Veteran HUBBer
  
Join Date: May 2009
Posts: 235
Bummer...

I have a 15T front sprocket I got from WEMOTO as well, but have not yet tried to install it.

How does it not fit? Will it bind on the retaining plate?
__________________
----------
Yamaha XT600E '01, Honda XR400 '03, Yamaha XT550 '83
Reply With Quote
  #29  
Old 11 Jul 2009
Registered Users
Veteran HUBBer
  
Join Date: Jun 2009
Posts: 168
It fits but it doesnt "work". You can put the sprocket on, everything looks correctly except that this sprocket isnt "wide" enough so that it will go too far in on the axle.

Look at this picture and see what i mean, where it says 9.5,thats the thing i mean, its less then the original and so it goes too far in on the axle, using it would be impossible.

Im starting to think maybe wemoto put in a wrong front sprocket for me by accident? Can you check what type your front sprocket from wemoto is? The one that came in my set was a JTF 1577.15



Reply With Quote
  #30  
Old 11 Jul 2009
bacardi23's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
Turn it the other way around and fit it in!?

Vando
Reply With Quote
Reply
Page 2 of 5 1 2 345

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
XT600E Chain and Sprockets change. Matt Cartney Yamaha Tech 5 7 Mar 2009 13:52
KLE chain & sprockets TommyT Kawasaki Tech 2 2 Feb 2009 09:21
sprockets & chain TT600 RE george t Yamaha Tech 10 28 Jun 2007 22:16
Chain and sprockets for AT in USA paul_r Honda Tech 1 26 Jul 2006 02:19
KLR stock chain & sprockets- are they any good? gmarch Kawasaki Tech 1 5 Nov 2001 09:31

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

Your ad could be here, on EVERY page of the HUBB, or the whole website, or as many as you like!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.



All times are GMT +1. The time now is 22:18.

Contact Us - Horizons Unlimited Motorcycle Travellers Website - Archive - Privacy Statement - Top