Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 30 Oct 2008
Registered Users
New on the HUBB
 
Join Date: Mar 2008
Location: yorkshire...uk
Posts: 12
2 basic questions...XT600E

Hi all, read lots of threads here and clearly there is a wealth of knowledge to access so here goes...

Firstly, as a relative newbie what are the essential/desireable mods for my 2001 xt600e that is in its basic state at the moment. ( used mainly for road but occasional off road use). I stumble across threads like the carb breather mod to stop it cutting out in water but wonder if anyone has compiled a list to cover these things without coming across them by chance?

The other question is, assuming that I have the factory fit front sprocket, what should I get if I want to come down a tooth for a bit more bottom end power. Can I just get a front cog and any recommendations?

Thanks in advance for the responses I hope to get and for those comments and threads that already teach so much!
Reply With Quote
  #2  
Old 30 Oct 2008
Registered Users
Veteran HUBBer
 
Join Date: Jan 2007
Posts: 183
Regarding the front sprocket. It depends on the condition the rest of the set (chain and the cog on the back) are.

Basically if you just replace the front sprocket on a set that's near the end of it's lifetime, the front will wear out much quicker and in the end you end up replacing it all together soon.

It's best to replace them all together or at least only change single items on fairly new sets.

Otherwise you end up wasting money on a part that could have lasted a lot longer.
__________________
Projekt Balkan
www.buebo.de - Der tägliche Wahnsinn
Reply With Quote
  #3  
Old 30 Oct 2008
Registered Users
HUBB regular
 
Join Date: Feb 2008
Location: Stoke UK
Posts: 70
Hi, regarding the sprocket, I did exactly the same thing, looking for a bit perkier response, and it certainly helped.

I just went out and bought a front sprocket one tooth smaller than standard gearing.

It was only when I took the old one off, that I realized the previous owner had fitted one a tooth bigger than standard to the front!

The difference wasn't that great, to be honest, so I'm glad I didn't know, 'cos I would have only dropped one tooth.

Of course it does affect the rpm for any given speed. (Take the percentage difference of your gearing - i.e 5 teeth more on a rear 50 tooth sprocket is 10% - and apply that to the revs, so if 70 mph is 4,000 rpm, 70 mph will become 4,400 rpm).

But make sure you go on what is fitted to your bike, not what standard fitment is!

Hope this helps.
Reply With Quote
  #4  
Old 31 Oct 2008
Registered Users
Veteran HUBBer
 
Join Date: Apr 2003
Location: Cape Town, South Africa
Posts: 303
Most important mod:
Progressive fork springs. From Benny Wilbers for example.
You can also raise the fork oil level a bit as a cheapo alternative.

The OEM springs are too soft. Do not use spacers to increase preload as 1. this does not change the spring rate but only changes the ratio between positive and negative travel; 2. does not reduce brake dive; and 3. causes the OEM springs to "sag" (permanently shorten which aggravates the squashy front end problem as the reduction of the springs free length it causes a decrease of the spring rate).

Always replace both sprockets and the chain as a set. Partial replacement causes rapid wear.
Try not to go smaller in the front as smaller sprockets also wear faster. Rather go bigger in the rear. Remember that going bigger in the rear might require a longer than OEM chain. Try to avoid "even" transmission ratios like 15 : 45 with a 120' chain (kind of worst case scenario) or 16 : 40 with 96' chain for example as this causes periodic wear. Ideal is for example the Kawasaki KLR 650 with 15 : 43 and a 104' chain which excludes periodic wear.
Reply With Quote
  #5  
Old 31 Oct 2008
Registered Users
HUBB regular
 
Join Date: Feb 2008
Location: Stoke UK
Posts: 70
Quote:
Originally Posted by lecap View Post
... as this causes periodic wear.
What is periodic wear? :confused1:
Reply With Quote
  #6  
Old 1 Nov 2008
Registered Users
Veteran HUBBer
 
Join Date: Apr 2003
Location: Cape Town, South Africa
Posts: 303
Quote:
Originally Posted by angustoyou View Post
What is periodic wear? :confused1:
Take my first example: 15' front sprocket and a 120' chain: After six revolutions of the front sprocket the same roller of the chain will mesh with the same tooth of the sprocket.
Same for the rear in this example: Six wheel revolutions will bring the same tooth in contact with the same roller. This is about as bad as it gets. A damaged front sprocket tooth always hits the same rollers. A seized roller always hits the same tooth on the front sprocket and the same three teeth on the rear.
In this case the chain is very likely to wear unevenly.

Compare with the KLR: 15 and 104 do not share common factors. Means the same tooth of the front sprocket meets the same roller only after 15 x 104 = 1560 turns of the sprocket and after every other tooth has met every other roller. Same between chain and rear sprocket.
The KLR's final drive should not wear unevenly.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
80gs basic sand lover BMW Tech 23 4 Mar 2008 11:54
Morocco Basic Questions spokemanjim North Africa 11 9 Sep 2006 11:58
Basic GPS? Del Boy Navigation - Maps, Compass, GPS 14 1 Jul 2006 15:52
XT600E questions Matt Cartney Yamaha Tech 11 10 Dec 2005 21:26
XT600e Questions? naismith Yamaha Tech 1 5 Feb 2001 16:29

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 20:06.