Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 29 Jan 2011
Registered Users
Veteran HUBBer
 
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
Ivj rebuild xt600 tenere 87

Ok ,......managaed to source a set of casing,s for my tenere 87 and intend on rebuilding the engine with the original electric start.......

I know they suffered from engine cooling problems from the oil pump and heads blowing and warping so the previous owner ( who buggered off to Australia where I hope things are working out for him,the wife and kids and is living the dream!) moved the oil cooler out into the airflow to a better position to help with cooling but is there anything else I can do to improve it and stop the potential problems occuring again?

I know one of the problems with blown heads from that model was no cooling getting to the head so yamaha got round it by putting vents in the front mudguard to improve cooling to the engine....I,m sure there was something about an improved oil pump on the 3aj/vj model ( not sure of model) and a change to the cylinder head bolts?

Any help or info more than welcome and hope everything is working out with my mate peril....
Reply With Quote
  #2  
Old 29 Jan 2011
Moderated Users
Veteran HUBBer
 
Join Date: Oct 2005
Location: Umtentweni, Kwa Zulu Natal, South Africa
Posts: 182
Hi,

modify airbox, bloc snorkels and remove service cover from airbox and let her suck the cooler air under the seat. Or fit a 3AJ airbox.

And head and cylinder from 3AJ/3TB or even better a complett engine.

regards

Thomas
Reply With Quote
  #3  
Old 29 Jan 2011
Registered Users
Veteran HUBBer
 
Join Date: Oct 2009
Location: Wiltshire, UK
Posts: 118
1VJ Airbox Mod

I uprated my 1VJ because of exactly the same concerns. See attached shots of the mods I've done to the standard 1VJ box: I used some pieces of plastic milk carton to block the inlet snorkels and then drilled inlet holes into the air filter access cover to mimic the 3AJ snorkel (do people think I've drilled enough?). However, as I'm concerned water will run in here when I'm splashing around on Salisbury Plain, I've just sourced a 3AJ box complete and plan on substituting that.

Future plans may include a later head and even a 4PT engine, but the original one is hanging in there for now. I'm thinking about an oil temp gauge before I head off to Maroc this year so I can keep an eye on how hot things are really getting...
Attached Thumbnails
Ivj rebuild xt600 tenere 87-p1050964.jpg  

Ivj rebuild xt600 tenere 87-p1050965.jpg  

Reply With Quote
  #4  
Old 29 Jan 2011
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: Croatia
Posts: 61
Do you think that these 3 holes will be big enough for air intake?

Edit: Now I see that you wonder yourself if drilled holes are big enough. Can you measure original snorkel dimensions, and that way you can calculate how big holes must be. This information will be helpful to me, because now I ride without airbox cover, and I would like to drill some holes in cover and put it back. I'm not sure how big holes must be, and I'm too lazy to remove airbox and measure myself

Last edited by svakak; 29 Jan 2011 at 19:52.
Reply With Quote
  #5  
Old 29 Jan 2011
Registered Users
Veteran HUBBer
 
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
The airbox mod has been done and I would like to soucre a later head with the larger cooling fins.....I think the airbox mod is why it has more oomph than my 4pt....
Reply With Quote
  #6  
Old 29 Jan 2011
R.I.P. 25 November 2021
Veteran HUBBer
 
Join Date: Feb 2010
Posts: 688
Quote:
Originally Posted by svakak View Post
Do you think that these 3 holes will be big enough for air intake?

Edit: Now I see that you wonder yourself if drilled holes are big enough. Can you measure original snorkel dimensions, and that way you can calculate how big holes must be. This information will be helpful to me, because now I ride without airbox cover, and I would like to drill some holes in cover and put it back. I'm not sure how big holes must be, and I'm too lazy to remove airbox and measure myself
When i got my 3AJ it came without a snorkel & the previous rider was riding it all across Western Australia like that, the only thing ive changed on that is now ive put some SS gauze in there to strop crap going in, my bike has got a experimental pipe on there (very free flowing) and ive also gas flowed the head so im hoping the opened up airbox will suit.



There`s a lot that`s been written on this forum about modding the airbox & looking at your holes id say leave it be for now, you can always put some more holes in later.

I think the general rule of thumb is Yamaha got it pretty spot on from standard.

Mezo.
Reply With Quote
  #7  
Old 30 Jan 2011
Registered Users
Veteran HUBBer
 
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
I have an oil temp gaige from e bay instead of a dipstick,,,,
Reply With Quote
  #8  
Old 30 Jan 2011
Registered Users
HUBB regular
 
Join Date: Dec 2007
Location: Christchurch,New Zealand
Posts: 95
Hope you aren't going to hunt me down Kenny,I did try putting you off it by being as honest as I could about the issues it had.
The oil pump in the motor was a 3aj one from what I could tell as it had 3aj stamped on the pump wheel.
Front mudguard mod is to cut it,which I did or to put slats in it like the XT550 had.
Maybe a larger oil cooler,say off a DR650?
Other than that,you're pretty restricted due to the silly design Yamaha did of the fuel tank - far to close to the engine.
Reply With Quote
  #9  
Old 30 Jan 2011
Registered Users
Veteran HUBBer
 
Join Date: Oct 2009
Location: Wiltshire, UK
Posts: 118
oil temp gauge

Quote:
Originally Posted by kenymact View Post
I have an oil temp gaige from e bay instead of a dipstick,,,,
Yeah, thought about these as they're only about £25 here. Trouble is, it's down under the right hand side panel - just too difficult to keep an eye on. On an XT500 ot 600E (oil in frame) it's just in front of you.
So what I'm really after is an electric gauge for the dash area and a matched sensor that I can put in the sump, or better still the oil tank. I fitted one of these to my aircooled VW bus years ago, and it was really useful (and worrying!) when cruising fully loaded on French autoroutes. I've seen universal kits for about 50 quid, but has anyone got any experience of fitting them to 1VJs/3AJs?
Reply With Quote
  #10  
Old 30 Jan 2011
Registered Users
Veteran HUBBer
 
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
No worries mate, I ll check the oil pump when I come to fit it. I noticed the cut down mudguard and will be pulling the bearings from the casings today and start a slow rebuild. Hope everything is working out for you in Oz mate....
Reply With Quote
  #11  
Old 1 Feb 2011
Registered Users
HUBB regular
 
Join Date: Jun 2007
Posts: 34
i did the blocking the snorkels and removing the air filter service hatch mod on my 1VJ. it ran ok, sounded better, but it was commented on that the exhaust smelled fuelly when riding in company. I removed the snorkels completely allowing more air into the box and this overrichness went away. I've since fitted a leo vinci road end can and performance is improved all round.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rebuild 34L Tenere or New Bike? luadraman Which Bike? 13 16 Jan 2011 11:12
Tenere 3AJ, story about total rebuild svakak Yamaha Tech 2 25 Jun 2010 02:03
XT600 (1985) Linkage rebuild kit foggie Yamaha Tech 2 28 Jan 2010 20:55
Please help me rebuild my XT600 1VJ. photographicsafaris Yamaha Tech 9 5 Mar 2008 23:24
Engine Rebuild XT600 bolla Yamaha Tech 2 18 Feb 2008 05:30

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 01:58.