Go Back   Horizons Unlimited - The HUBB > 4 wheels > Light Overland Vehicle Tech
Light Overland Vehicle Tech Tech issues, tips and hints, prepping for travel
Under 3500kg vehicles, e.g. Land Cruiser, Land Rover, Subaru etc.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 18 Oct 2011
Registered Users
Veteran HUBBer
 
Join Date: Feb 2004
Location: UK
Posts: 1,232
H60 hubs

HI all
the front swivels on my H60 are pissing oil, unfortunately, rather foolishly toyota made these a cast part of the axle so they can 't be replaced, as far as I can tell. Even grease pours out.

The problem is due to scoring and pitting from corrosion on the chrome swivel.
anyone any ideas on a possible solution other than changing the seals every 10000 miles!!
__________________
1990 Landcruiser H60. Full rebuild completed 2014
Reply With Quote
  #2  
Old 19 Oct 2011
Registered Users
Veteran HUBBer
 
Join Date: Aug 2008
Location: Shropshire
Posts: 194
Chemical Metal and some delicate use of wet and dry paper?
Reply With Quote
  #3  
Old 19 Oct 2011
silver G's Avatar
Gold Member
Veteran HUBBer
 
Join Date: Mar 2007
Location: south Cumbria
Posts: 364
You could also see if there are any swipe seals left, if you have any. Not familiar with Toyotas.
Do you need oil in the swivels? can you get away with something thicker like grease? My G wagen uses grease but the cv is sealed inside a gaiter.
__________________
Chris
-----------------
"Never have a stupid argument with an idiot - he gets a lot more practice than you"
there I go again
not too hard really
Reply With Quote
  #4  
Old 21 Oct 2011
Registered Users
Veteran HUBBer
 
Join Date: Feb 2005
Location: uk
Posts: 217
hubs

hi would this be another solution? i have heard of silver soldering the pits then filing down smooth, finishing with wet and dry then a polish and/or this Gearing Dynamics centre differentials for Toyota Landcruisers fitting page. Also Greasable CV Joints, CV Boots, Exhaust Brakes, Air Suspension, Radiators hope this helps steve
Reply With Quote
  #5  
Old 24 Oct 2011
Registered Users
Veteran HUBBer
 
Join Date: Jun 2007
Location: Anchorage, Alaska
Posts: 326
The Gearing Dynamics boots seem to be the long term solution. Some good mechanic in India or Pakistan would be delighted to fill the holes and scrapes with brazing compounds and then sand them smooth....for an eminently reasonable price. Be sure to pay him a bit extra, he needs the $$ more than we do.
Also: there is an oil seal at the outside of the differential housing tube, inside diameter about 1.31". That keeps the gear oil out of the housing for the CV joint, which should theoretically have only grease inside it.

Charlie
__________________
Unimog U500 w/Unicat
Reply With Quote
  #6  
Old 26 Oct 2011
Contributing Member
Veteran HUBBer
 
Join Date: Jun 2005
Location: Ledbury, Herefordshire, UK
Posts: 324
Firstly make sure the inner axle seal is replaced so that none of the diff oil is leaking into the knuckles.

We normally just use a flap sanding wheel for our die grinder to smooth off the roughness and then spray with a rust treatment to slow down further pitting.

The seals are only supposed to hold back CV grease (unlike some LR/RR ones) so as long as there is no roughness that can wear the seals down just renewing them should be enough, otherwise if they are severely pitted you could go the chemical metal route although very labourious.

The gearing dynamics boots are interesting although I have had them fail on 80s and also if not checked regularly they could end up with water in them which would lead to rapid rusting - I don't think the seals are good enough to hold back water for that long.
__________________
Cheers,

Julian Voelcker
Overland Cruisers - Specialising in Land Cruiser preparation and servicing.
Reply With Quote
  #7  
Old 28 Oct 2011
Registered Users
Veteran HUBBer
 
Join Date: Dec 2007
Location: Sweden
Posts: 141
Change inner drive shaft seal to get rid of the oil in the knuckles. Make sure the swivel housing bearings are in good condition and are properly adjusted. Also make sure the Inner axle kunckle bushing not are worn out. Otherwise the driveshaft won't be in the center and the drive shaft seal will soon start to leak again.
Reply With Quote
  #8  
Old 29 Oct 2011
Registered Users
HUBB regular
 
Join Date: Jan 2010
Location: Bridgend, UK
Posts: 33
They seem to be the same as the Daihatsu design then, on my old F20 I used something similar to chemical metal to fill the grooves then wet and dry to smooth it out. I sprayed it with aluminium paint, fitted fresh wipe seals and filled the hubs up with the semi-liquid grease sold for Land Rovers. This seemed to do the trick for the five years or so I kept it afterwards.

In addition to what is said above about centering the hub, there are shims under the top and bottom bearings which need to the same thickness top and bottom to get this right.

Regards - Alastair
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DR650 front wheel hubs Chris Scott Suzuki Tech 8 22 Oct 2010 08:44
Which wheel/hubs fit? TTR600_marc Yamaha Tech 2 18 Apr 2008 02:53

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 15:43.