Toyota landcruiser hj60 weather shields
 

Howdy All

Can anyone help us figure out how weather shields go onto
a HJ60 our's fit they are correct strait from Australia.

But having trouble figuring out how these go on...Pulling
my hair out...:censored:...

Hope someone has them on there truck or can help us out...PLEASE

Thank You

Traveller1041

Howdy Dan,
Are we talking the chrome strip that goes along the bottom of the glass or the rubber seals that the doors close against?
If it's the chrome one, the main thing is don't bend it. I removed one of mine to treat some rust and bent it a little, the combination of a rusty door skin and a bent strip has meant it'll never fit on properly again.
If both the door skin and the strip are in good condition, it should just 'pop' into place and the clips will hold it to the door skin.
Let me know if i'm barking up the wrong tree.
I'm back home to be reunited with my truck on friday, so if you want me to check anything then, just let me know.
See you soon
Sam

Going Mad...
 

Howdy Sam

Hope all is well at your end mate...Looking Forward to Wale's...:D

These weather shields are driving me mad I think These Fit under the rubber
Seal will have to take some time Looking at which way these fit.

These must pop under the rubber but will not hold unless some glue is
put into the theory of thing's.

Will keep you posted Mate....Drive Safe

Dan......:taz:

No worries mate.
Any help i can be tomorrow or friday eve when i'm back with my truck, just let me know.
Are they to replace a worn bit or to give some added protection in addition to what was originally fitted?

Take care bru:thumbup1:

Hi you sent me a request re my HJ61 unable to reply via hubb for some reason
feel free to write back2myroots@gmail.com mike B2MR