Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Tech
Tech ALL bikes: "Generic" tech questions and answers. Maintenance, general discussions etc.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 26 Jul 2009
Registered Users
HUBB regular
 
Join Date: May 2009
Location: Norway
Posts: 27
what is the best way to fix a flat tube tire on the road

usally i have a box with foam with me, but is there anything else to buy that will work better or that is more longlasting? without the need of removing the tire?
Reply With Quote
  #2  
Old 26 Jul 2009
Registered Users
Veteran HUBBer
 
Join Date: Apr 2008
Location: West Yorkshire UK
Posts: 1,785
Simple answer no.

The foam will fail on about 50% of punctures and will always leave you with a tyre that will slowly leak air. Tyre fitters will curse you for using the stuff and may refuse to help you unless you buy new tubes or even a new tyre. IMHO, bin the foam.

A better solution is Gloop or Ultraseal. These are liquids you put in either straight after a tyre change or straight after a puncture. On 90% of puctures they get you going and are good for days if not weeks. You still have the issue with tyre fitters and they stop patches sticking, so you will end up throwing away the tubes. The limit is a hole that won't stay still. Get a nail that works about in the tyre and makes a flap of V-shaped cut and they simply don't work.

The only solution that is 100% effective and will result in you carrying on the ride with the certainty of getting where you want to go is tyre irons and a spare tube or patch kit.

Do you need the 100% certainty or are you going to be in places where the tyre guy will come to you after a simple phone call?

Andy
Reply With Quote
  #3  
Old 26 Jul 2009
pottsy's Avatar
Gold Member
Veteran HUBBer
 
Join Date: May 2007
Location: london, uk.
Posts: 360
, before it gave out Ouch! This issue has real relevance for me as of late. On the A2 autobahn halfway between Berlin and Magdeburg (heading west) my rear tube (an old one by the looks of it - on there since i've had the bike)developed a tear which left me stuck by the autobahn for some 3 hours whilst i waited for Adac to attend to me. I must add i had the tube out twice (how hard is it trying to isolate a puncture being buffered around by all the passing trucks with the attendant noise on a fenced-in section of the road - answer Very) but the patches i applied just couldn't hold the air in. So the Adac chappy stuck some foam in which got me going to the outskirts of Magdeburg (40km'ish on the back roads before it gave out again) where i eventually located a new tube. Annoying thing is that i didn't take a spare tube as it was a pure road-trip and a straightforward puncture shouldn't have been a problem... Sod's Law and all that!
Reply With Quote
  #4  
Old 26 Jul 2009
Registered Users
HUBB regular
 
Join Date: Dec 2005
Location: Portalegre,Alentejo,Portugal
Posts: 71
The foam stuff hardly ever works. Personally i always use HD tubes but carry normal spares as they don't take up so much space and are quicker to fit. The time it takes to find and patch a hole on the trail or by the roadside is normally far greater than replacing the tube. You can then patch the original tube at your leisure.
Reply With Quote
  #5  
Old 4 Aug 2009
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
Carrying tyre changing gear & spare tubes etc will be one of the best decisions you can make.

Learning to repair puncture or replace tyres by the roadside will be one of the most useful skills a bike rider can have.

Practice at home & work out what works for you.
__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #6  
Old 4 Aug 2009
Contributing Member
Veteran HUBBer
 
Join Date: Mar 2003
Location: London,England
Posts: 358
Hi
my bike has an 18" rear and 21" front
If brinigng a spare tube I heard it is better to bring just a 21" as this can also be used in the rear if necessary.
Has any one tried this and does it work
Thanks
Reply With Quote
  #7  
Old 4 Aug 2009
Registered Users
Veteran HUBBer
 
Join Date: Apr 2008
Location: West Yorkshire UK
Posts: 1,785
Enduro racers do it and at that level it works.

My question is, is something smaller than a book worth risking life,limb and hassle over? An incorrectly sized tube will run at the wrong temperature, sit in the wrong place and carry the load in the wrong way. You will therefore need to change it again at some indeterminate point before it fails. Do you want the mess of another change shortly after the first one? My final point against is that it invalidates your insurance. If it blows out in western Europe and you cause a petrol tanker to crash avoiding you, you'll be doing the paperwork for the rest of your life one way or the other.

I've seen this trick done twice. Both times the bike got off a trail and onto a main road (20 miles tops). After that, I assume the riders made it home but beyond that I don't know.

Personally I'll carry the right sized tubes and do the job once. If the weight is that important to you I can see you might do this, but outside racing it seems a bit pointless. If the weight is that important IMHO, simply don't supersize your lunch.

Andy
Reply With Quote
  #8  
Old 4 Aug 2009
Big Yellow Tractor's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2008
Location: England
Posts: 649
The 21" tube works fine in an 18" wheel. It'll see you good for another 100miles of hard trail-riding, but for travel, I'd carry the same spec spares as I have fitted.

If you run HD tubes but carry a standard spare are you going to repair the HD then fit it later and put the standard tube back as a spare ? I don't think so.

Get a decent kit of patches and some spare glue. Replace the silly bit of sand-paper supplied with some emery-cloth and put some talc in a pot. A biro does a good job of marking where the hole is.

Try patching a few times before you go and get used to propping the bike, removing wheels and fixing punctures with the tools you carry.

Fix the tube as soon as you get a chance; nothing worse than getting a puncture a few days or even hours later and then remembering you haven't fixed your spare.

Have fun
Reply With Quote
  #9  
Old 17 Aug 2009
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
For Electra owners. but maybe useful to others.

Although the toolkit includes tyre levers (piddley little things) It does not include a spanner to get you wheel nut loose. To change the rear wheel you will need to source a 24mm flat ring spanner. WAIT for the exhaust to cool first. To adjust rear chain, you will need a 30mm flat ring spanner.
Reply With Quote
  #10  
Old 18 Aug 2009
Registered Users
Veteran HUBBer
 
Join Date: Apr 2008
Location: West Yorkshire UK
Posts: 1,785
Dim and distant recall, but I thought there was some sort of box spanner? Looked utterly useless and I'd always replace with proper tools, but it's not like Enfield to leave you in that much trouble.

Now a Moto Guzzi Nevada, that requires you to lean the bike over off the centre stand to the right while dragging the wheel out on the left. Easy so long as you are built like King Kong!

Andy
Reply With Quote
  #11  
Old 18 Aug 2009
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
Quote:
Originally Posted by Threewheelbonnie View Post
Dim and distant recall, but I thought there was some sort of box spanner? Looked utterly useless and I'd always replace with proper tools, but it's not like Enfield to leave you in that much trouble.

Now a Moto Guzzi Nevada, that requires you to lean the bike over off the centre stand to the right while dragging the wheel out on the left. Easy so long as you are built like King Kong!

Andy
Yup, you are advised to do something similar on the Enfield, but I just put it on the centre stand on a bit of wood plank to give enoungh clearance to slide it out easy. I have yet to try to remove the front wheel
I updated my last post on the air cooled thread, after discovering my bike is fitted with a one tooth bigger gearbox sprocket. It felt overgeared, and I was about to order a one size smaller sprocket, but I was suspicious so counted the teeth
Incidentally you will also need an 18 mm and 14mm spanner to do many maintenance tasks.
Reply With Quote
  #12  
Old 28 Aug 2009
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2009
Location: Gloucestershire
Posts: 376
Bought this today to break the tyre bead:

Quick clamp

Works very well - up to 250kg of force (depending on your spinach intake) and deep enough to reach the rim over my 150/70 rear tyre.

They do a bigger one too, but this will fit in my MM pannier once I've sawn the bit of shaft off I don't need (about 4 inches).
Reply With Quote
  #13  
Old 30 Aug 2009
Registered Users
Veteran HUBBer
 
Join Date: Aug 2009
Location: Dorset UK
Posts: 395
Whats that TYRE MOOSE stuff all about then??????????

Isn't it some sort of puncture proof system - foam or sumink :confused1:


Years ago, my old Ford Escort MKI was running remoulds - got a flat, so bought some Tyre Slime (green hairy liquid?) - whacked it in the tyre, took out the nail, spun the wheel round a few times... pumped it up and it was good for months - until I wrote the car off (was 18yrs old at that time).
Reply With Quote
  #14  
Old 31 Aug 2009
farqhuar's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2008
Location: Oztralia
Posts: 646
I had countless punctures riding through China last year. On one stage I was up in the mountains on a gravel road 50km from the nearest town - that's a very long way in China - and had no option but to continue riding when the rear blew out. There were vey few other vehicles on the road - the only one I saw was another rider with a flat front tyre.

I eventually found a truck stop where they repaired the tube for me. The other rider pulled in shortly after, had his front repaired and very generously invited me back to his home to stay the evening.

The point is that you can continue riding - albeit at slow speed - for a lot farther than you think with a flat.
__________________
Garry from Oz - powered by Burgman
Reply With Quote
  #15  
Old 31 Aug 2009
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2009
Location: Gloucestershire
Posts: 376
Were you running heavy duty inner tubes?

What tyres and pressures?
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
No more flat tire with these travelHK Equipping the Bike - what's the best gear? 5 13 Mar 2008 21:11
Tyres: to tube or not to tube? Crazylegs Honda Tech 30 6 Dec 2007 16:46
Front inner tube inside the rear tire? pierresas TRAVEL Hints and Tips 7 8 Feb 2006 20:05
Tubless tire fitting/removing on the road Margus BMW Tech 10 17 Oct 2005 23:01
Flat Tire - Repair Kits hanif23 Equipping the Bike - what's the best gear? 5 18 Jun 2001 03:01

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 00:24.