Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Tech
Turn Signal Beeper Mod Turn Signal Beeper Mod
Register FAQ Calendar Today's Posts
Tech ALL bikes: "Generic" tech questions and answers. Maintenance, general discussions etc.
Photo by George Guille, It's going to be a long 300km... Bolivian Amazon

I haven't been everywhere...
but it's on my list!


Photo by George Guille
It's going to be a long 300km...
Bolivian Amazon



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 23 Mar 2009
Registered Users
New on the HUBB
  
Join Date: May 2008
Location: NM, USA
Posts: 10
Turn Signal Beeper Mod
This beeper modification is based on the original posts of
Phantom Rider and Dan Oaks

You’ll need a 12VDC Piezo buzzer (#273-060) and a Bridge Rectifier (#276-1152) from Radio Shack,
probably found in the electronics parts drawers next to LED bulbs, transistors, switches, etc.
The buzzer is about $5.00 and the B.R. is about $3.00
You’ll also need some wire to run to the blinker splices,
some electrical tape &/or shrink wrap, a solder gun and some solder,
and maybe 6” of metal mount and two small wire nuts.

The #273-060 buzzer is black and round, heat-rated to 140 degrees F. at 3.0 - 28VDC / 5mA.
It has two wires coming out of it- one black/negative & one red/positive.


The #276-1152 Bridge Rectifier is 100VDC / 1500mA.
It has four leads coming out of the bottom- one pos., one neg.,
and two other wires both signified as ‘AC’.
Refer to the back of the packaging when installing.
The BR will look similiar to this one:



Solder the black/neg. wire from the buzzer to the Neg. wire of the BR,
and solder the red/pos. wire from the buzzer to the Pos. wire coming from the BR.
Positive is marked with a ‘+’ on the top of the Bridge Rectifier-
negative is directly opposite/below Positive,
and the leads on either side of Pos. will go to each blinker.

Don’t get the BR too hot when soldering and shrink-wrapping on the leads.
Be sure to clip a heat sink (alligator clip) between the rectifier and the point of soldering to protect it from the heat.
Tape or shrink tube all leads and connections as you go.
I found the two buzzer wires long enough to connect directly to the BR-
you may choose to strip and tin the ends of two small pieces of wire
and add these between the buzzer and the BR.

Solder two long wires (about 2 or 3 feet each) to the remaining two wires of the BR-
these long wires will later be cut-to-length at the splice-in point of
the positive wires going to each blinker on the bike.
Shrink-wrap or carefully tape the four connections separately,
then wrap again over all together.

For the buzzer container I used a round plastic (‘IceBreakers’) mint case with a snap-on lid.
I removed the labels and sanded & painted the outside of it black.
Then I mounted the buzzer into it with two small bolts and nuts through the plastic mounts on the sides of the buzzer.
I laid the taped-up Bridge Rectifier & splices section along-side of the buzzer,
taped it all down inside the case, and routed the two long wires out through a pre-drilled hole.



I attached the case to the inside of the fairing,
using about 5 inches of that roll out metal mounting strip with holes in it.
I just removed the side fairing screw,
slipped the bracket in along the inside of the fairing,
and put the screw back in through one of the holes in the bracket.
This avoids drilling a hole in the fairing.



On a KLR, you may be able to locate your splices under the wiring cover behind the tach.
Splices there would be more weather resistant and not visible.
I already have two splices under there and it’s getting crowded,
so I went the obvious easy route and spliced-in near where
the turn signal wires enter the front two turn signals.
Splice the two long wires from the BR to each of the positive leads going to your signals.
On my 2007 KLR650 these wires are gray- I did not disturb the black/yellow negative wire.
It doesn’t matter which BR wires go to which blinker.
Each left and right splice will have three wire ends in it-
I put on a small wire nut, then taped the nut.

This setup is loud enough to hear at idle with a helmet on,
and puts out a good level of beeping for me- loud enough but not too loud.
You can insulate the buzzer further to bring down the volume.


Dan installs one of these on his XT225 and DR650 here:
dirtly.com: Bierdo’s Motorcycle Web Pages
Last edited by ellsworth; 24 Mar 2009 at 19:31.
Reply With Quote
  #2  
Old 24 Mar 2009
Registered Users
Veteran HUBBer
  
Join Date: Apr 2005
Location: Oxford UK
Posts: 2,104
What goes around comes around!

Back in the 70's Honda used to fit indicator buzzers to their bikes (my CB550 certainly had one although interestingly my current 400/4 and CBX don't) and the mags were full of articles telling you which wires to pull to disconnect the things.
Reply With Quote
  #3  
Old 24 Mar 2009
Registered Users
New on the HUBB
  
Join Date: May 2008
Location: NM, USA
Posts: 10
Quote:
Originally Posted by backofbeyond View Post
What goes around comes around!
lol!
yeah- after forgetting to turn off my flashing signals for miles as I blissfully putt along down the road,
I guess I've finally gotten to the point of actually appreciating an annoying safety beeper...

))))))))))))))))))))))
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Self cancelling turn signals Bernard Yamaha Tech 9 10 Jan 2009 19:51
The turn off for Diama Lamin Sambou sub-Saharan Africa 7 19 Mar 2007 14:26
Broken turn signal lens - Will I be hasseled? rhinoculips SOUTH AMERICA 7 10 Nov 2006 15:49
Turn off automatic thread subscription beddhist Website Feedback 5 1 Nov 2006 23:14

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

Your ad could be here, on EVERY page of the HUBB, or the whole website, or as many as you like!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.



All times are GMT +1. The time now is 17:48.

Contact Us - Horizons Unlimited Motorcycle Travellers Website - Archive - Privacy Statement - Top