Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Tech
Tech ALL bikes: "Generic" tech questions and answers. Maintenance, general discussions etc.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10 Nov 2011
Chris Scott's Avatar
Super Moderator
Veteran HUBBer
 
Join Date: Jun 2000
Posts: 4,801
Switchable ignition mapping question

Switchable ignition mapping - is it all a bit of timing retard for lower octane fuel - or as I suspect - is it a lot clever these days and perhaps I'm talking about two different things?

I recall early KTM Advs had it - for lower octane as mentioned - but the latest Super Ten sport/tour D-Mode looks more sophisticated and may have nothing to do with octane, just milder throttle response and better economy.

ta

Chris
Reply With Quote
  #2  
Old 10 Nov 2011
gixxer.rob's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2008
Location: Back in Melb
Posts: 287
Quote:
Originally Posted by Chris Scott View Post
and may have nothing to do with octane, just milder throttle response and better economy.Chris
I would say thats the one.
Reply With Quote
  #3  
Old 20 Nov 2011
Registered Users
Veteran HUBBer
 
Join Date: Jan 2008
Location: UK
Posts: 208
It's just a passing gimmick IMHO.


On sports bikes there was a fear of political backlash to the powerful engine outputs they were achieving with their latest models so they fitted what they called “switchable mapping” where the rider can select from a range of settings via a switch on the handle bar. Thus, you have a setting for “wet weather” so the rider would not kill himself winding on 190 bhp in second gear out of a round-about! Other settings are for “track” for obvious “political” reasons. All's they do is adjust the ignition timing but mostly the fuel injection sequence to degrade the engine performance in some way. Sometimes they can change the response of the secondary 'flies if fitted too.


To be fair, these have now evolved into semi-useful traction control and will evolve further into anti-lock braking which the EU fascists are seeking to make mandatory for all bikes and should be resisted (or better still – leave the EU ).


Some bikes are equipped with knock sensors which act as a proxy to detect the octane rating of the fuel under the conditions under which the engine is operating and can adjust the ignition timing accordingly therefore, intrinsically “switch the mapping” whilst others with EFI will adjust the injection parameters also.


A well designed EFI such as BMW's parallel twins' can run very efficiently (I haven't studied how they do this) but all bikes today are designed to meet legislative emission requirements as their “first state of tune”. Their EFI's will always attempt to achieve “stoich” or stoichiometric ratio which is the optimum for emissions (obliged by legislation) and theoretical combustion efficiency. However, this is seldom the optimum state of tune for either maximum power or maximum fuel economy and a good EFI will have sufficient sensors and software to enable both – except for the emissions requirements getting in the way all the time!


The biggest obstacle to the happy medium is the OEM's choosing to fit (for cost reasons) narrow-band lambda sensors in the exhaust stream. These are only capable of detecting rich or lean and act more like a switch than a sensor. Wide-band sensors are available which can enable a far more subtle EFI response and will produce perfect fuelling under all conditions, can run your engine to the extremes of lean (and therefore fuel economy) as well as “best power” and response.


To get to this happy sate you will have to junk your standard ECU and learn about after market ECU's (cheaper too than OEM's). You can tune your engine how you like, tune each cylinder individually, tune for a different map for each gear, tune on the fly from your mobile phone if you wish so there really is no requirement whatsoever for “switchable mapping”.


MegaSquirt is the way to go; it's all open source and the latest MicroSquit is designed especially for bikes and other small engines and I'm hoping to find one under my Christmas tree in a few weeks



Incidentally, the hated EU is proposing legislation which will make it illegal for all but “official” technicians to open up or otherwise modify your engine and also to compel official technicians (i.e. your “official” dealer) to report you to the authorities for prosecution for doing so under pain of two years imprisonment. Luckily the hated EU is about to implode and leave us all the alone!!!
__________________


Last edited by Fastship; 20 Nov 2011 at 18:03.
Reply With Quote
  #4  
Old 21 Nov 2011
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
Quote:
Originally Posted by Fastship View Post
Some bikes are equipped with knock sensors which act as a proxy to detect the octane rating of the fuel under the conditions under which the engine is operating and can adjust the ignition timing accordingly therefore, intrinsically “switch the mapping” whilst others with EFI will adjust the injection parameters also.
Are there any other bikes then BMW that use a knock sensor? Do you know if it alters the mixture (on the BMWs)? As far as I know they can use Super on the emission-tests so it should be possible to pass the test on Super and run fatter on low-octane.
Can you wire a knock-sensor to MegaSquirt and use it for mapping?


Back to the switch..... There is a switch on the (old) BMW G450X Enduro. I'm not sure if it helps for low-octane but it helps a lot where there is low traction.
Reply With Quote
  #5  
Old 21 Nov 2011
Registered Users
Veteran HUBBer
 
Join Date: Jan 2008
Location: UK
Posts: 208
Quote:
Originally Posted by AliBaba View Post
Are there any other bikes then BMW that use a knock sensor? Do you know if it alters the mixture (on the BMWs)? As far as I know they can use Super on the emission-tests so it should be possible to pass the test on Super and run fatter on low-octane.
Can you wire a knock-sensor to MegaSquirt and use it for mapping?
The BMW F800 (actually not a BMW but a ROTAX engine) doesn't use a knock sensor. There are more knowledgeable peeps on here about that bike them me but I seem to remember reading that BMW dealers will download a new map for lower octane fuels if you ask them nicely. That engine probably runs high compression and has a good combustion chamber design. Also it's a light(ish) weight bike, well geared hence the good fuel economy. The GS has knock sensors though.


Honda's super sports bikes have had knock sensors on them for a while now ( NGK SPARK PLUG CO., LTD. | Others ) but to me they seem very useful on a ADV bike where you might encounter the different conditions likely to cause knock, factors like unknown fuel type, air temperature extremes, coolant temperature extremes, air/fuel mix, air density, etc, etc. and you have tuned the engine to the extremes of lean to get extra range out of it. Best of all is to have a simple motor that will be unlikely to knock in the first place 'cos it's knackering to the engine!


Third party sensors can be wired to Megasquirts and you adjust the software to suit



but to counter knock the ECU will retard the ignition not enrich the mixture.
__________________

Reply With Quote
  #6  
Old 22 Nov 2011
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
Quote:
Originally Posted by Fastship View Post
Third party sensors can be wired to Megasquirts and you adjust the software to suit
Thanks!
Megasquirts looks a bit experimental. Is it suited for Adv-bikes? Do they make a kit for bikes?
Reply With Quote
  #7  
Old 22 Nov 2011
Registered Users
Veteran HUBBer
 
Join Date: Jan 2008
Location: UK
Posts: 208
Quote:
Originally Posted by AliBaba View Post
Thanks!
Megasquirts looks a bit experimental. Is it suited for Adv-bikes? Do they make a kit for bikes?
You're correct, by definition they are experimental. It's similar to Linux in that no charge is made for the software, it's all open source and you are encouraged to contribute results & improvements back for the good of everyone. If you are good with a soldering iron you can even assemble your own ECU from plans and a bag of bits you can buy off ebay and only build in the features you desire. For that reason there is no specific ECU for any bike or car, you design it for any engine you have in mind. They have been used on everything from chain saws to 32 cylinder aero engines! Here's someone who's squirted a monkey bike engine : Monkey Pit bike engine Microsquirt ECU EFI fuel ignition injection - YouTube

The virtue of squirting is that it forces you to understand deeply every aspect of your engine - it's addictive!

It's definitely suited to ADV bikes but I would suggest as a replacement for the OEM ECU. i.e. utilise the existing sensors and injectors and use the software to tune your bike how you wish (with the addition of a wideband lambda sensor that is).

The latest microsquirt V3.0 is about the size of a credit card and you can buy them ready built with the features you specify.



and you can learn more from the site here : http://www.useasydocs.com/quickstart.htm

free linux tuning software: http://megatunix.sourceforge.net/
__________________


Last edited by Fastship; 22 Nov 2011 at 15:09.
Reply With Quote
  #8  
Old 22 Nov 2011
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
Thanks, this looks far better then the old big boxes I found when I search for MicroSquirt.
I will read through it and hopefully use it for a later project. Soldering and programming is no problem.

I'm sure it can be addictive
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Price and resale question Paulmcintyre Which Bike? 1 7 Feb 2012 14:21
Tajikistan Road Question shu... Northern and Central Asia 20 31 Dec 2011 00:00
The old Burmese question Bryn Route Planning 4 30 Nov 2011 09:28

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 22:39.