Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Tech
Tech ALL bikes: "Generic" tech questions and answers. Maintenance, general discussions etc.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 21 Mar 2013
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
old bikes

separated from push starting an efi as roaming off topic

The more I learn about modern bikes the more I like the old triumphs I had back in the sixties and onwards.
In well over 100K Miles I Only once had a flat battery, and it was because I had parked the bike the night before with the lights on. I knew something was up the following morning because the bike did not start first kick. I did try a second kick as I wasn't feeling too bright. When that didn't work I looked around the bike and realised I had left the lights on and had a flat battery. The FIx?
Switch the lights off and turn the ignition switch to EMG instead of IGN. then One kick and it started. After half a minute switched it back to IGN and that was that.
I always felt secure on my old Triumphs. True they need more routine maintenance but because they needed it it was easy to do. Plus nearly any fault came on gradually so you could always fix it before it became a problem. EFI is maintenance free until it suddenly, without warning fails completely. Then it can cost more to fix than a new crank. On my old Triumphs the ignition was one wire taking power to the coil, a wire from the coil to the points and a HT lead. That was the wiring harness. Then there were three componenents. the coil, plug and the points. The points cost less than a gallon of petrol, you still have the coil and the plug.

Last edited by Chris Scott; 22 Mar 2013 at 08:42.
Reply With Quote
  #2  
Old 21 Mar 2013
Registered Users
Veteran HUBBer
 
Join Date: Apr 2005
Location: Oxford UK
Posts: 2,102
Sounds like you had the good ones the factory turned out. My experience of 60's / early 70's Triumphs / BSAs etc is that they were for the most part unreliable and fragile - a bit like recent decades Land Rovers!

No point in giving chapter and verse on every fault that had one or other Triumph grinding to a halt in the corner of some foreign field but a trip to Greece in 1973 went through two Triumphs (one new, one 1yr old) vs zero faults on the accompanying Yamaha. That was about par for the course back then.
Reply With Quote
  #3  
Old 22 Mar 2013
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
Quote:
Originally Posted by backofbeyond View Post
Sounds like you had the good ones the factory turned out. My experience of 60's / early 70's Triumphs / BSAs etc is that they were for the most part unreliable and fragile - a bit like recent decades Land Rovers!

No point in giving chapter and verse on every fault that had one or other Triumph grinding to a halt in the corner of some foreign field but a trip to Greece in 1973 went through two Triumphs (one new, one 1yr old) vs zero faults on the accompanying Yamaha. That was about par for the course back then.
I don't know, I was only stopped from completing a journey once at about 80, 000 miles with my 500. That bike went to and from Norfolk to Cornwall every weekend for two years and never missed a beat 435 miles each way. I was in the forces then and back in the early sixties there were no motorways except for the M1 which went from the North circular towards Birmingham. My first ever breakdown due to an electrical fault was about six years ago (on the BMW).

Oh and the Triumphs breakdown wasn't really the bikes fault. At 80,000 miles I replaced the primary chain and clutch sproket as they were worn. 45 miles later the primary chain jumped through the chaincase. All the teeth were missing from the clutch sprocket. Apparently a bad batch from Qualcast.

I admit I have been lucky. In all that time I only ever had one puncture on a bike Until I got the BMW. that one kept losing air from the seal between rim and tubeless tyre. Oddly the only time I had problems with flat tyres was once when I had a cortina with alloy wheels. they would do the same, drive it hard round a bend and the tyre would go completely flat in an instant due to losing the seal between rim and tyre. so I got a set of steel rims and never had a problem after. I did about 50,000 miles a year for 20 years as I was a service enginneer for an American computer firm for that time. After 1970 I only rode as a hobby on a 1970 Triumph Trophy. To my mind the best motorcycle ever made by anyone. If I had to have one: and only one bike for the whole of my life I would choose that model. From 1971 Triumph had real problems whilst BSA managed them into obscurity. and because older Brit bikes were simple to maintain. anyone with a hammer and chisel had a go. Even today when I buy a bike or car I look for one that shows no signs of "maintenance". If you can see where a PO has been, leave it alone for it is likely to be a can of worms. It was not knowing what PO's had done that persuaded me to buy the Enfield instaed of an old Triumph as that at least was untouched from the factory. The other reason is I twice wrecked my right knee in car accidents and don't always want to kickstart a bike.
The Enfield is now properly sorted and is fine. it has many features I like. Kickstart and electric start. a carb, gravity fed fuel. (gravity does not fail as often as electric pumps). can easily be changed to Right or Left hand gearshift. 95Mpg, low seat height. 180 kilos. and is Very manoeuvrable. I was able to do a Uturn on the ferry in one cars width and drive out. all the other bikes had to wait until the next lane cleared. I never saw one of them until about I was 50 miles along the road. I admit due to a manufacturing fault the crank failed when I went to Poland. But it rattled me all the way back to a friends house in Belgium where I left the bike. I delivered it to a specialist bike repair shop in the UK and collected it with a new heavy duty crank installed. for less than half the price I was quoted ten years ago to fix an engine management fault on my Volvo. So in my eyes its cheaper to replace two Enfield cranks than to fix one ignition fault on a modern car. I see lots a "good" cars written off because it is too expensive to fix their electrics. How is that being "green".
Reply With Quote
  #4  
Old 22 Mar 2013
Registered Users
Veteran HUBBer
 
Join Date: Apr 2005
Location: Oxford UK
Posts: 2,102
Quote:
Originally Posted by oldbmw View Post
I see lots a "good" cars written off because it is too expensive to fix their electrics. How is that being "green".
I'd agree with that - and it's not just the "OMG" parts either (the expensive engine management bits). I'm not sure I know anyone, in the trade or not, who's got as good a grasp of car electrical systems and how to fault-find them as they have of mechanical components and far more electrical issues tend to be abandoned rather than fixed; at least until it becomes an MOT issue anyway.

Maybe the 60's were Triumphs best decade; I don't really know as I didn't know anyone who had better than wrecks (and it's unfair to judge on those) until the early 70's, but our collective experience between '70 and '76 wasn't good. We did a lot of Euro touring in those years and never had more than trivial problems with anything Japanese but we never had anything less than a serious issue with a number of Triumphs - clutch failure, crank failure, that kind of thing. When the bike had to be recovered for the third trip in a row (and this was a new bike, still in warranty at the beginning anyway) you tend to lose faith in the engineering. The replacement Honda had no such issues.
Reply With Quote
  #5  
Old 23 Mar 2013
Registered Users
Veteran HUBBer
 
Join Date: Jan 2009
Location: Cambridge UK
Posts: 107
Surely your average 80`s or 90`s Jap bike must have the best reliability/ease of maintenance compromise?
__________________
This old world keeps spinning round, it`s a wonder tall trees ain`t laying down.
Reply With Quote
  #6  
Old 28 Mar 2013
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
As I said, I was in the forces in the early 60's and went home to Cornwall from Norfolk every weekend. I was never late back and in fact never had any breakdowns during that time except once a clutch cable failed just as I came off the A11 onto the North Circular. but I just rode the rest of the journey without one. My primary chain failed later after I had been invalided out.
Reply With Quote
  #7  
Old 30 Mar 2013
Dodger's Avatar
Large Golden Member
Veteran HUBBer
 
Join Date: Aug 2005
Location: BC, Canada
Posts: 1,085
Personally I believe the 50's and 60's British bikes were better than the 70's . Looking back at the early seventies , they were a time of asset stripping owners ,arrogant management and bloody minded unions fighting it out whilst industries went down the toilet . [ remember the three day week ?]
Obviously quality control and investment went by the wayside . Very sad .
However bikes from those days can be rebuilt and made into reliable and very desirable machines for those who understand and appreciate mechanical simplicity and are prepared to do the preventative maintenance .
I'd love an Enfield but a 500 is a bit small for me and the roads I ride , a 750 or bigger twin would be ideal . There are rumours that Enfield have a big twin on the drawing board , I hope it's true .
__________________
Blessed are the cracked, for they let in the light. - Spike Milligan
"When you come to a fork in the road ,take it ! When you come to a spoon in the road ,take that also ."
Reply With Quote
  #8  
Old 31 Mar 2013
Gold Member
Veteran HUBBer
 
Join Date: Jul 2008
Location: London
Posts: 404
Quote:
Originally Posted by Dodger View Post
Personally I believe the 50's and 60's British bikes were better than the 70's . Looking back at the early seventies , they were a time of asset stripping owners ,arrogant management and bloody minded unions fighting it out whilst industries went down the toilet .
You're mostly right I think. The rot started in the 50s, and it was nothing to do with the unions.
Take a look at this:
http://www.britishpathe.com/video/si...-counted-out-1

(Sorry about the adverts at the start).

BSA was brought to its knees by its own chairman and his wife, celebrities in their own lifetime. I remember my Dad getting quite angry about them and dispairing of the management of the British bike industry (and of the rest of British industry). He tried to help a smaller company succeed by selling his old BSA M20 and buying a brand new Panther about the time the Dockers were being kicked out of BSA. It was a huge sum of money for him to find, and the Model 100 lasted the rest of his bike-riding life. But his purchase didn't help of course.

This from Wikipedia: "The issues leading to the removal of the Dockers stemmed from the extravagant expenses they presented to the company, including the show cars made available for Lady Docker's personal use, a £5,000 gold and mink ensemble that Lady Docker wore at the 1956 Paris Motor Show that she tried to write off as a business expense as she 'was only acting as a model' at the show, and Glandyfi Castle, bought with £12,500 of BSA's money and refurbished for £25,000, again with company money."

Other than that I can't really comment as despite my Dad's faith in British bikes I only ever owned two, a Villiers-engined Greeves trials bike with added lights, great fun on the dirt, and a Norton Commando on the track, great fun too, but unreliable.
__________________
TTR250 - London to Cape Town
Reply With Quote
  #9  
Old 31 Mar 2013
Registered Users
Veteran HUBBer
 
Join Date: Apr 2005
Location: Oxford UK
Posts: 2,102
Quote:
Originally Posted by Dodger View Post
Personally I believe the 50's and 60's British bikes were better than the 70's . Looking back at the early seventies , they were a time of asset stripping owners ,arrogant management and bloody minded unions fighting it out whilst industries went down the toilet . [ remember the three day week ?]
Obviously quality control and investment went by the wayside . Very sad .
However bikes from those days can be rebuilt and made into reliable and very desirable machines for those who understand and appreciate mechanical simplicity and are prepared to do the preventative maintenance .
I'm sure whatever 30's design Triumph, BSA etc were knocking out in the 50's was perfect for the era and would have been thundering past Morris Minors and Austin A30s with ease. By the time I got into bikes in the late 60's though I didn't want something that harked back to "our finest hour" and looked like it was made out of whatever was leftover from the Spitfire production line.

That's how it seemed to me, even in my teenage innocence, at the time - backward looking arrogant complacent management running companies knocking out brand new "retro" bikes with sales buoyed up by semi hysterical press coverage telling us that these British world beaters were better than anything our vanquished "yellow peril" foe could come up with and that not "Backing Britain" by buying one was a betrayal of everything we'd fought for. I wouldn't have been able to state it quite like that back then but whatever patriotic feelings I had wasn't enough to stop me looking at the (second hand) Hondas in the dealers showrooms.

Given a choice between a Kawasaki H1 500 and a Velocette 500 (Venom?) (actually a magazine road test back then - which the Velo won!) I'd have sold my soul to the devil for the H1. The Velo looked, to my teenage eye, like something James Watt could have developed from his steam engines, whereas the Kawasaki looked like something NASA needed for the moon program. Strangely, and even though I have an H1 in my garage these days, I'd probably chose the Velo now. But that's because I don't need it for transport.
Reply With Quote
  #10  
Old 31 Mar 2013
palace15's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Feb 2005
Location: LONDONISTAN, England
Posts: 1,034
When I was getting into bikes I was influenced by the guy I worked for and his even older friend, the latter incidently, taught me to ride. The guy I worked for had a particular liking for Japanese machines(CB500/4) but due to family commitments had sometime previously only had a Honda 90, not the step thru, now his friend and my 'mentor' had always owned Brit bikes, AJS and Nortons but in his advancing years rode CB350, CB125 and CB360 and used the Norton for longer trips, I was told many times about the 'Dockers' and how the British management had their heads in the sand. Years later I read the Bert Hopwood book.....'Whatever happened to the British motorcycle industry?' I then understood !! We got what we asked for I'm afraid, even in racing, the Brits were trying with singles cylinder machines to take on Japanese and Italian 'multis'.
__________________
'He who laughs last, was too slow to get the joke'
Never confuse the map with the journey.
Reply With Quote
  #11  
Old 31 Mar 2013
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
Materials

Quite apart from the design issues, a "wise old motorcycle engineer", long retired now, once advised me to never buy anything from pre mid-1960s.
With the obvious, inevitable question of why, he responded that the technology developed during WW2 (necessity is the mother of invention) took until about that time to be adopted in the mass production of consumer products; prior to that, in his view, the materials technology in use went all the way back to the invention of the internal combustion engine.

__________________
Dave
Reply With Quote
  #12  
Old 18 Jun 2013
Registered Users
New on the HUBB
 
Join Date: Jun 2013
Location: india
Posts: 1
I don't grasp, i used to be solely stopped from finishing a journey once at regarding eighty, 000 miles with my five hundred. That bike visited and from Norfolk to county each weekend for 2 years and ne'er incomprehensible a beat 435 miles every approach. i used to be within the forces then and back within the early sixties there have been no motorways apart from the money supply that went from the North circular towards Birmingham. My initial ever breakdown attributable to associate degree electrical fault was regarding six years agone..
------------------
2013 MERCEDES BENZ SL-CLASS
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bike shipping Kathmandu Nepal – Bangkok READ THIS! Brian and Tanja West and South Asia 40 31 Mar 2023 14:11
Warning! Why not to rent bikes from Stonehead Bikes - Delhi! WorldlyMaret West and South Asia 23 2 Dec 2021 05:18
3 bikes for sale in Peru Flachschieberli SOUTH AMERICA 0 10 Nov 2011 21:04

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 16:28.