Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Tech
Tech ALL bikes: "Generic" tech questions and answers. Maintenance, general discussions etc.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 20 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Sep 2004
Location: Estonia
Posts: 351
Question To oil clutch/throttle cables or not?

I'm a bit confused as most sources tell to oil clutch/throttle cables now and then, but on the other hand my genuine Suzuki service manual does not say a word about it. I see that oil can stick more dirt and that will do no good. Perhaps the cable tubes have special material inside that does not need oiling?
Reply With Quote
  #2  
Old 21 Feb 2009
gixxer.rob's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2008
Location: Back in Melb
Posts: 287
Hello,

clutch and brake cables come from the factory lubed up with thick grease but over time this gets washed/pulled out the ends.

I would use something like chain lube (because it's sticky) and a aerosol cable luber if you don't have access to a hydraulic cable luber to force some grease down the cable.
Reply With Quote
  #3  
Old 21 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Apr 2008
Location: West Yorkshire UK
Posts: 1,785
I'm betting the Suzuki manual is under 10 years old and designed for their techs? Their techs don't need the mess and "Elf n Safety" hassles of lubeing cables and will view any failure as repeat business.

You on the other other hand want the cables to last as long as posible, so replacing the factory grease as it's lost is a good idea. My own preference is for motor oil down the cable then a blob of grease on the ends to seal it in and dirt out.

Andy
Reply With Quote
  #4  
Old 21 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Sep 2004
Location: Estonia
Posts: 351
In service manual greasing of cable ends and levers is mentioned but no word about cables themselves.
I forgot I had brand new spare clutch cable, so I took a good look at it. Seems there is no typical grease inside. The cable itself is coated with thin layer of stuff that looks more like wax/paraffin than usual grease or oil. Unfortunately can't see inside the tube, can only open it at adjustment thread.
Reply With Quote
  #5  
Old 21 Feb 2009
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
Some bikes have teflon-lined cables, they should not be lubricated.
Reply With Quote
  #6  
Old 21 Feb 2009
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,822
Teflon: No Lube

plus one on the Teflon cables. I suppose a bit of grease on the end would be OK but don't force oil down a Teflon coated cable. Some may use a dry Graphite as well? I remember reading something about this on the Motion Pro site.

One tip about carrying a spare cable: Use Gaffa tape to tape cable ends when the cable is stored. Will keep it nice and clean, like new.


Patrick
__________________
Patrick passed Dec 2018. RIP Patrick!

Last edited by mollydog; 21 Feb 2009 at 21:02.
Reply With Quote
  #7  
Old 21 Feb 2009
Redboots's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Location: On the border - NE FR
Posts: 865
Nope.

On most bikes, from the 80's onwards, if they are not Teflon coated they will have a nylon sleeve on the inner cable.

As a general rule, you do NOT oil or grease cables unless they are worn out. Then a bit of lube as temporary relief is ok.

You SHOULD grease/oil the nipple/holder.

John
__________________
Nostradamus Ate My Hamster
Reply With Quote
  #8  
Old 21 Feb 2009
gixxer.rob's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2008
Location: Back in Melb
Posts: 287
No Lube ?

Not wanting to disagree too strongly with the above but I would always lube or ensure that the cable stays lubricated and free from cable rotting dirt, salt or other krud that will shorten the life of the cable. Teflon lubed or nylon sleeved covers only do half the above job.

Turning the clutch handle bar adjustment to face backwards is not enough.

My 10 cents worth..

Reply With Quote
  #9  
Old 23 Feb 2009
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
Quote:
Originally Posted by gixxer.rob View Post
Not wanting to disagree too strongly with the above but I would always lube or ensure that the cable stays lubricated and free from cable rotting dirt, salt or other krud that will shorten the life of the cable. Teflon lubed or nylon sleeved covers only do half the above job.

Turning the clutch handle bar adjustment to face backwards is not enough.

My 10 cents worth..a

The problem with lubing teflon coated cables is that the lube dissolves the teflon and you get a slurry of oil and teflon which doesn’t lube at all. It works for a few thousand km but then it’s worse then ever.
Reply With Quote
  #10  
Old 23 Feb 2009
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,822
Been there, done that!
__________________
Patrick passed Dec 2018. RIP Patrick!

Last edited by mollydog; 25 Mar 2009 at 07:54.
Reply With Quote
  #11  
Old 23 Feb 2009
Mr. Ron's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: Vancouver, BC, for now...
Posts: 792
Quote:
Originally Posted by AliBaba View Post
The problem with lubing teflon coated cables is that the lube dissolves the teflon and you get a slurry of oil and teflon which doesn’t lube at all. It works for a few thousand km but then it’s worse then ever.
Yup, +1! My cable was getting old, so i lubed it for the rest of the trip. Within a few thousand k's, i had the forarm of a butcher! If it's teflon coated, don't lube it, it'll just get worse. As for the others, well, i really couldn't tell you.
Reply With Quote
  #12  
Old 23 Feb 2009
gixxer.rob's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2008
Location: Back in Melb
Posts: 287
I stand corrected. :confused1:

Just for my own interests sake what type of lubricant has been used that dissolved the teflon coating? RP-7, WD-40, chain lube, grease, oil ?
Reply With Quote
  #13  
Old 23 Feb 2009
Mr. Ron's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: Vancouver, BC, for now...
Posts: 792
Quote:
Originally Posted by gixxer.rob View Post
I stand corrected. :confused1:

Just for my own interests sake what type of lubricant has been used that dissolved the teflon coating? RP-7, WD-40, chain lube, grease, oil ?
Mine was some sort of prenatrating lube in a can i bought in Medellin, sorta like WD-40 or 1-2-3. It literally destroyed my cable lining! I only used it because the cable was going south on me and i figured i had nothing to loose because i had a spare in my box. Lesson learned. Maybe engine oil wouldn't have the same effects?
Reply With Quote
  #14  
Old 24 Feb 2009
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
Quote:
Originally Posted by gixxer.rob View Post
I stand corrected. :confused1:

Just for my own interests sake what type of lubricant has been used that dissolved the teflon coating? RP-7, WD-40, chain lube, grease, oil ?

I dislike heavy throttle-cables so I always lube them when they wear out, this gives me okay performance until I can fit new ones.

I have used CRC, WD40 and chain lube (yes I have two chain-bikes) and all gave the same problem. Chain lube didn’t lube much at all.
Personally I don’t believe in dry Graphite on but it’s worth trying, maybe next time but don’t hold your breathe I will change the cables shortly and they will probably last 80kkm
Reply With Quote
  #15  
Old 6 Mar 2009
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
All new cables on motorcycles from 90s onwards (maybe earlier as suggested) are indeed teflon lined and factory greased.

If yours are sticking, they are WORN and can not be revived. You can oil them but this will be a temporary fix as in time, the oil will glog and gunk up and just make things worse.

All you can do is replace them
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bonneville Cables Threewheelbonnie Triumph Tech 0 13 Jun 2008 11:33
R100 GS pd Synchronise the carburettors, and adjust the wire cables splash BMW Tech 2 30 Jan 2008 08:49
jumper cables fward TRAVEL Hints and Tips 5 2 Nov 2007 15:18
broken throttle cables bayonet TRAVEL Hints and Tips 12 16 Sep 2007 20:48
Throttle cables Matt Cartney Yamaha Tech 2 30 Jan 2006 15:56

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 18:17.