Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Tech
Tech ALL bikes: "Generic" tech questions and answers. Maintenance, general discussions etc.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 8 Feb 2010
Gold Member
Veteran HUBBer
 
Join Date: Nov 2005
Location: Wells, Somerset
Posts: 233
Just a thought, Oxygen sensor to check mix?

Really just a thought, but I was wondering if you could use the oxygen sensor from a fuel injected bike, to rig up a rear-time meter that would tell you if the mix was right?

I assume that these sensors are used to tell the fuel injection management system, how rich or lean the burn is.

So could you theoretically plumb one in around the header exhaust pipe area, and wire it to a display somewhere, that would tell you second by second, if the mix is right?

It could tell you if the bike's running rich at high revs, or needs to be leaned out all through the range, or at what altitude the bike's running best etc.

It would just be interesting to know accurately, what the bike's doing. Not necessarily for an overland adventure, but maybe to get the bike setup right before you leave, or to know how you need to jet when you climb mountains.

What do you think?
Reply With Quote
  #2  
Old 9 Feb 2010
Champ's Avatar
Contributing Member
HUBB regular
 
Join Date: Apr 2009
Location: Beenleigh Qld Australia
Posts: 44
Hey Baron Bolt…on.

What a good idea, great for the perfectionist and great to make sure that your carburetor system is always in tune or be able to see what it is doing. Think its a great idea.

Me I think if I had any concerns with a carby bike I would rip in for a Dyno tune before I left for RTW and once the jets are chosen they are set then there is no need to be anything else but standard and usually unless your bike is used for racing.

Eg changing cams, exhausts, bore size, rod stroke ratio, increasing flow to carby’s. porting and polishing etc etc and generally putting your engine on the edge.

However just a thought changing jets in the carb may not be a lot of fun on a minute to minute basisin the cold and usually high altitude. where everything always seems twice as difficult and heavy.

As the valleys meet the mountains it’s up and down continually changing.

Unlike small aircraft which has a mixture adjustment that is controlled from the cockpit and is usually adjusted on start up and taking into consideration small aircraft usually fly at a nominated height and rarely vary that height from point A to point B

So considering the fitment of a sensor, consider also an adjustable main jet which was made a long time ago for the FJ Holden (1950s Aussie car) as part of a tune up kit Yeo….. brings back memories

Carbs have come a long way and the alternative was to design a fuel injection system so (an old mate of mine (Ivan Tighe… Tighe Engineering and Cam Grinding) designed the Amil carburetor back when Jack Brabin was winning Formula 1 (it was developed through REPCO along with the REPCO Brabham race engine: interesting and knowledgeable Fellow) everything could be perfect….. perhaps the other alternative would be to design an aftermarket fuel injection kit , they have them for cars and I looked into an aftermarket kit for bikes but couldn’t find one: it would be good if the electronics were perfectly sealed from dust and water.

Sub Note:- FJ Holdens Late 40S-50S Jack B about 60S was a spectator when Jack blew the REPCO….Red Hot bits were flying all over the place up the back strait of Sandown Melbourne…. tossed in 20 quid to assist with a rebuild (don’t have a pounds sign on my key board)

Go for it

Kind regards

Champ
Reply With Quote
  #3  
Old 9 Feb 2010
Registered Users
HUBB regular
 
Join Date: Jul 2007
Location: Norn' Iron'
Posts: 90
Yes, this can be done. There are 2 types of o2 (aka lambda) probes, narrowband and wideband. As the name would suggest the narrowband will tell you if you are chemically correct or not whereas the wideband will tell you how far out you are. Wideband typically used for diesels, depends what you are aiming for. You'd need to get a boss welded into the pipes to fit it (can be found on ebay under 'lambda boss').

Some have more wires than others for a heater but basically they output a voltage to indicate mixture.

This voltage has very little current behind it so if you measure it with something that pulls even a small current (moving needle meter) it will pull the voltage down and ruin the measurement. You ideally need to pass it though a high impedance op-amp and then read the voltage somehow after this (multimeter or something).

If this all sounds doubledutch there are pages scattered on the net for how to do all this. You can also buy the complete thing again on ebay although they can be around £150.

N
__________________
Belfast to Kathmandu on a Diesel motorbike 2010/11 www.suckindiesel.com
Reply With Quote
  #4  
Old 9 Feb 2010
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
There a lot of products for lambda-tuning, here is one:
Wideband Lambda Gauge | Stack | Demon Tweeks Motorsport, Motorcycle, Car Modifying, Parts and Accessories,Sparco, Arai

Reply With Quote
  #5  
Old 10 Feb 2010
Registered Users
Veteran HUBBer
 
Join Date: Apr 2005
Location: Oxford UK
Posts: 2,102
Or you could make your own:
D.I.Y. air/fuel ratio meter
Reply With Quote
  #6  
Old 10 Feb 2010
Gold Member
Veteran HUBBer
 
Join Date: Nov 2005
Location: Wells, Somerset
Posts: 233
Cool, thanks very much

Well that all sounds pretty positive. As I said it's really nothing more than a thought at the moment. But it sounds like it would be an interesting (educational more than anything else) project when I get home.

That demon tweeks thing looks suitably sexy, but not sure about the 230 quid price tag. I was thinking more along the lines of trying to get an old Lambda sensor from a FI bike at a scrap yard, and wiring in the leds as an indicator.

But what about this wideband narrowband difference?

The demon kit says it includes a wideband sensor, as does the DIY kit. What do they use in bike FI systems?

(Just had a read through some wikipedia articles, and it says:

"The original narrow band oxygen sensors became factory installed standard in the late 70's and early 80's. In recent years, a newer and much more accurate 'wide band' sensor, though more expensive, has become available.")

I was thinking of making up a short section of tube that would be clamped in between the existing header and silencer. This section would have the hole drilled and boss welded. This way it'd be removable, and hopefully easier to bolt on to a different bike. Plus no mods needed to the exhaust components that are on the bike at the moment.

Ebay.com has some stuff. I searched wide* lambda* and found 150 buck sensors, or kits for 200. hmmm
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Any idea on what kind of sensor this is? gatogato BMW Tech 0 23 Mar 2009 03:14
clutch Sensor john_aero Kawasaki Tech 2 14 Dec 2008 09:36
Just a thought.... TobyJug 4 wheel Overland Travel 7 18 Aug 2008 19:26
M18 x 1.5 lambda sensor boss/bungs for sale dynomec Equipment Reviews 0 15 Apr 2008 04:24
Temp Sensor thread size jamieT KTM Tech 3 15 Jul 2005 17:14

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 12:57.