Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Tech
Tech ALL bikes: "Generic" tech questions and answers. Maintenance, general discussions etc.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 5 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Feb 2008
Location: Between London & Singapore
Posts: 153
Motorcycle mechanics course for big trip - how does this look?

Hi everyone,

I'm in the early planning stages of a trip from London to Oz in 2010 and am looking to 'develop' my mechanical skills (and i use that word loosely!!) ahead of time. I have read a thread in this section about how little knowledge people have travelled with but would prefer not to be test sods law like that!

One of the local colleges near me is running a 20 week course that comprises of a weekly 2 hour class, the highlights of which i've put below.
There is an advanced course that can be taken on completion of the practical course.

What does the course cover?
This practical course covers the following topics;
Identifying frame types
Overhauling telescopic front forks
Replacing an inner tube
Overhauling a two-stroke top end
Re-setting cam Timing
Stripping and rebuilding a multiplate clutch
Stripping, reassembling and adjusting a carburettor
Replacing rear brake shoes
Replacing points
Resetting ignition timing.

My question is, do you think this would provide me with sufficient know how or not. Or does anyone have a third idea/option?

thanks
__________________
www.motoventurers.com
Reply With Quote
  #2  
Old 5 Feb 2009
Gold Member
Veteran HUBBer
 
Join Date: Oct 2008
Posts: 619
Watt? No electrics?

You'll be well advised to learn about electrical gremlins. Get a cheap, sorry, old bike and learn as you go. Linzi.
Reply With Quote
  #3  
Old 5 Feb 2009
wishfull traveller's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Feb 2007
Location: Dorset
Posts: 96
training

You know what they say alittle knowledge can be a dangers thing, but I would say if it makes you feel more confident in your approch to the bike and the trip then go for it.

If you only come away from the course knowing and understanding how to remove the wheel and change a tire or reseal a front fork then I would say it had been woth doing it.

Whats the cost of the course and which collage isit being run at ?.
Reply With Quote
  #4  
Old 5 Feb 2009
mattcbf600's Avatar
Gold Member
Veteran HUBBer
 
Join Date: Aug 2006
Location: London, England
Posts: 706
Go for it - the biggest thing that these course do is give you confidence to give it a go and take it apart - which frankly is half the battle.

I did the course at Merton Collage in South London and can't recommend it enough - whilst it was very 'basic' it assumed no prior knowledge and by the end of the course I was easily able to service my bike - and even attempt larger tasks like valve clearances.

If you're not too far from Merton I really would give them a call

__________________
------------------
http://thelondonbiker.com/blog

Watch some of my camp cooking videos

AIM: mattcashmore
SKYPE: matthewcashmore
MSN: matthew@matthewcashmore.com
Reply With Quote
  #5  
Old 5 Feb 2009
SDR SDR is offline
Registered Users
HUBB regular
 
Join Date: Jun 2005
Location: London, UK
Posts: 23
Bobduro - I've wanted to do a course like this for a while. Let us know what college runs it.

I'll also look into the Merton course mattcbf600 mentioned.

Seth
Reply With Quote
  #6  
Old 5 Feb 2009
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,822
I think it's great. Hopefully they've updated the cirriculum a bit .... as things like points and setting ignition timing haven't been around in decades.

I would try to find a course that covers basic routine maintenance on more modern bikes.

Batteries and basic electrical diagnostics should be there as
well as valve adjustment procedures.

As you prep your bike for travel my guess is you'll learn quite a bit about
your own bike.

Buy a VOM (Volt-Ohm meter) and some good basic tools and start building your travel tool kit early. Use it at home so you know it works on the road.

__________________
Patrick passed Dec 2018. RIP Patrick!
Reply With Quote
  #7  
Old 6 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Feb 2008
Location: Between London & Singapore
Posts: 153
Mechanics Course

Thanks Guys,

Funnily enough this course is the one at Merton College. Their course started in January but with the snow (all 6 inches of it!) they've postponed one the classes so have offered me to start the course late and get an appropriate discount off the original course price of approx £400.

One of the attractions of it for me is that with one 2 hour class per week it's managelable alongside work. A friend is doing a full (NVQ) course at Lambeth College but thats a full academic year and 2 hour classes each week, and whilst as a qualified mechanic at the end he'll be able to do anything, i think it's maybe too much of a commitment (for both time & money).

I am alarmed at the lack of any electrical classes but given that Matt & Moolydog seem to have done the very course and speaks so highly of it and, of course, as some have said given the fact that it might give me more confidence i think i'll give it a go. I'll let you know how helpful it is....
__________________
www.motoventurers.com
Reply With Quote
  #8  
Old 6 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Aug 2008
Location: NFA
Posts: 222
Do it

Hey guys,

I'm doing the Merton College course at the moment - its very good, very hands on and stuff that you could do with knowing, and Greg and Ern are two top blokes. They know their stuff, but also know the shortcuts, tips and handy little tricks that will keep you going. It's not cheap - but it is well worth it. Do it - you won't regret it.

Regards

Belle
Reply With Quote
  #9  
Old 8 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Feb 2008
Location: Between London & Singapore
Posts: 153
Hopefully I'll see you there then Belle!
__________________
www.motoventurers.com
Reply With Quote
  #10  
Old 9 Feb 2009
maria41's Avatar
The franglais-riders
Veteran HUBBer
 
Join Date: Jul 2005
Location: UK
Posts: 1,175
I did the introduction course that you mentioned (back in 2006) at merton college . And then the Advanced course, the following year. It covered a bit electrics but not much.

Both were very good. Shame Howard is gone he was great.

I certainly recommend it.

Electrics can be tricky as I found out during my year in south America. Most of the problems related to my bike were electrics. Learning a bit there could be useful.
Learn what the Voltage regulator does. It is easy to replace. Learn how to do it.
About Batteries, how to replace it, test is, how to jump start from another vehicule.
Pack a voltmeter. Even better, fit a voltmeter so that you can monitor if your battery is charging (and hence if your VR is working).

Just these few bits could save you a lot of trouble on the road...
If you ride an F650 make sure you fit a SEALED battery. The idiotic position of the oil tank next to the battery will cause the battery to dry and in turn can cause many problems...
__________________
Maria

www.franglais-riders.com
Reply With Quote
  #11  
Old 10 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Oct 2007
Location: Sunderland, UK
Posts: 280
I've got to ask, how mechanically competent are you? If you're reasonably OK with the spanners and capable of a basic service on a car, changing its brakes and suspension components then you'll learn more from buying a knackered old bike and stripping/rebuilding it with the help of a Haynes manual.

Many faults on modern bikes are electrical so this course not covering it is a mistake. Definitely buy a multimeter, learn how to use it properly and don't even think about making do with a test lamp as they can wreck havoc with electronics, particularly fuel injection circuits.
Reply With Quote
  #12  
Old 11 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Feb 2008
Location: Between London & Singapore
Posts: 153
Hi Craig,

I can only do the VERY basics. I could change brake pads etc but not much more. Part of the reason for wanting to do this course is learn the shortcuts, tricks and to understand what faults cause what problems etc.

Being able to change,fix or service those parts that tend to wear/fail will just give me an awful lot of confidence, and if nothing else will mean i'm more likely to try and save cash and carry out some servicing myself.

Living in London, the required space for a spare bike to practice on just isn't feasible and i can say with a degree of certainty that my better half would be less than impressed if bits of bike started appearing around the house!....
__________________
www.motoventurers.com
Reply With Quote
  #13  
Old 13 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Oct 2007
Location: Sunderland, UK
Posts: 280
In that case, the course could be just right for you. Bear in mind that there's a huge difference in courses like this aimed at DIY owner/riders/drivers compared to the course your mate is doing which is aimed at the motor trade, even at fast-fit and NVQ entry level. However, being an informed participant in the discussion when you book your bike in at the dealer may ensure that the work you pay for, actually gets done!

I would ask about bringing your own bike into the workshop so you can learn about problems specific to your bike, but don't be surprised if they say no due to H&S and litigation reasons.

Get a copy of your bike's workshop manual and also copy of the Haynes Motorcycle Basics Techbook. Reading the relevant section of the Techbook after each workshop session will help you understand the task which may help with diagnosing problems, even if you then resort to a dealer to fix them.

Good Luck!


Motorcycle Basics Techbook (Haynes Techbooks): Amazon.co.uk: Matthew Coombs, Pete Shoemark: Books


Last edited by craig76; 13 Feb 2009 at 13:49. Reason: Link added
Reply With Quote
  #14  
Old 20 Apr 2009
Registered Users
HUBB regular
 
Join Date: May 2008
Location: Nottingham
Posts: 49
I've been looking for something like this as well, if anyone knows of somewhere in the Nottinghamshire area I'd appreciate it - so far I've come up with nothing.
Reply With Quote
  #15  
Old 20 Apr 2009
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
"A little knowledge is dangerous"


I think you should do the course but understand the limitations. Don't think you will be able to start pulling your engine apart and rebuilding your calipers because you do a short course. And if you haven't been properly trained and examined to do a job, please get someone who is to check it over.

I trained as a moto mechanic going through all the levels and eventually getting all the way through my IMI registration. It took 4 years of hard work and practical examination.

When I completed my first year, I was full of confidence thought I could rebuild any type of bike with my eyes closed ... Well, surprise surprise.. I COULDN'T, and I made costly and maybe dangerous mistakes on the way to working that out.

Remember that what you learn in these classes will be in a workshop environment. You will have a box full of proper tools, manuals and power equipment. Changing a tyre with a hydraulic machine and an airline is WAY WAY different than fixing a puncture on the side of the road using hand tools..

DEFINITELY do the course & gain knowledge and confidence, but as I say ! Know the limitations for your own safety !

Peace & love !
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
YOUR motorcycle trip in North Thailand ultspnch Travellers Seeking Travellers 0 18 Jan 2009 10:43
Not The Motorcycle Diaries - Central and South America Trip Not The Motorcycle Diaries Route Planning 2 15 Feb 2007 21:46
Motorcycle Trip arround de Mediterranean sea juanjo Europe 1 3 May 2004 21:54
Motorcycle Trip arround de Mediterranean sea juanjo North Africa 1 3 Mar 2004 07:20
Many motorcycle trip reports brclarke Travellers' questions that don't fit anywhere else 0 19 Jul 2000 22:24

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 10:23.