Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Suzuki Tech
Suzuki Tech Suzuki Tech Forum - For Questions specific and of interest to Suzuki riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 17 Dec 2009
Registered Users
HUBB regular
 
Join Date: Sep 2008
Location: Yarm
Posts: 25
Clutch change suzuki dr650se 99

Hi, i'm looking to change the clutch on the my bike myself.

I was wondering iof its a simple enough job to do and whether its advised to change complete set or if i can get away with just the plates?

I'm currently in Dar es salaam so if anyone could help with good parts centres or shipping companies it would be much appreciated

cheers

Mike
Reply With Quote
  #2  
Old 17 Dec 2009
Registered Users
New on the HUBB
 
Join Date: Feb 2009
Location: Melbourne, Australia
Posts: 18
The DR clutch is straight forward to change - I didn't have any dramas doing mine in a Russian car park. You don't need any special tools beyond what you are probably already carrying.

It's cheaper to get a non-suzuki clutch, such as this one: Catalog. The hardest part for me was scraping off the old gasket - I recommend trying to keep it intact and reusing it (but have a new gasket or gasket glue as a plan B).

There is a good chance that the clutch plates will be fine, but you need to decide if you can afford to change the clutch, and then wait for new plates to be shipped in if the old ones are buggered.
Reply With Quote
  #3  
Old 17 Dec 2009
Registered Users
Veteran HUBBer
 
Join Date: Oct 2005
Location: Nottingham UK
Posts: 227
You shouldn't need to ever change the steel/plain plates. If your clutch slips under load you need to change your friction plates, and maybe your springs as well.
__________________
UK to Mongolia 2009, on a DR350
Reply With Quote
  #4  
Old 17 Dec 2009
Nigel Marx's Avatar
Super Moderator
Veteran HUBBer
 
Join Date: Oct 2000
Location: South Island, New Zealand
Posts: 798
Thumbs up

Well, you don't need to change the steel plates UNLESS the clutch has been seriously cooked. Then, the steel plates can warp and the clutch won't release properly. When you get the clutch apart, put the plates on a proper flat surface and see if there is any wobble.
The clutch can be changed without draining the oil. Just lay the bike down on some sacks or a pack or something to protect the paintwork, clutch side up. As someone said, try to save the cover gasket. Loosen the clutch cover and try to see which side of the join the gasket most wants to stick to. Then get a very thin bladed flexible knife (I use a fish filleting knife) to try to persuade the gasket to remain where it wants to. Take time and be patient. If you need to use a new gasket, a thin smear of grease on both mating surfaces acts as both a good extra sealant AND lets you reuse the gasket next time.

Cheers bloke,

Nigel in NZ
__________________
The mouth of a perfectly contented man is filled with . -- 2200 BC Egyptian inscription
Reply With Quote
  #5  
Old 17 Dec 2009
Registered Users
HUBB regular
 
Join Date: Sep 2008
Location: Yarm
Posts: 25
Question

fantastic info, thans alot that's really cleared things up

One other thing, the oil is my bike is seriously old, 10w40 which I usually use isn't available, could anybody suggest a like alternative?

mucho gracias

mike
Reply With Quote
  #6  
Old 29 Dec 2009
Registered Users
HUBB regular
 
Join Date: Sep 2008
Location: Yarm
Posts: 25
Question new problem?

Having changedf the friction plates and springs and reasebled the bike I took it for a test run adn found the power had returned.

However when stopping I found that the bike now creeps forward even with the clutch lever fully in and I'm also having difficulty engagingneutral. keeping the bike in first with the lever fully in the bike then cuts out??

I've heard a number a problems can be associated with this such as warped metal plates, grooves in the basket.

I've had to use 20w50 mineral oil also, could this be the problem? I usaully use 10w40.

any suggestions would be much appreciated, before I changed the plates I encountered none of these problems????
Reply With Quote
  #7  
Old 29 Dec 2009
Contributing Member
Veteran HUBBer
 
Join Date: Jun 2008
Location: Tucson, Arizona USA
Posts: 107
Simplest stuff first: Ensure there is cable free play at the lever, and also at the arm at the clutch, and also that cable routing isn't causing it to bind.

I don't think 20/50 would cause those symptoms.

Beyond freeplay...I would vote warped plates over grooves in the basket. But either way you're going back into the clutch for a visual inspection of things.

Sean
Reply With Quote
  #8  
Old 29 Dec 2009
beddhist's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Sep 2003
Location: Whangarei, NZ
Posts: 2,214
Do check for grooves in the basket and file the off. I'm still on the first set of friction plates @ 180000km, but mine creeps, too and the basket has already been filed.
__________________
Cheers,
Peter.

Europe to NZ 2006-10
Reply With Quote
  #9  
Old 31 Dec 2009
Registered Users
Veteran HUBBer
 
Join Date: Oct 2005
Location: Nottingham UK
Posts: 227
The dr350 has a few known problems with a dragging clutch, and there is a fix involving removing a little material from the back of the clutch basket to stop it rubbing presumably on the bearing race behind it. Bent or worn washers are apparently another cause of the same symptoms. Maybe the 650 suffers the same way?

I've seen grooves in the clutch baskets of older bikes I've owned, but I've never been convinced that it's caused noticable drag (as in I've filed them away without the clutch drag I was trying to fix going away). The correct way to check your steel plates for flatness would be on a pane of glass. It doesn't seem very common for them to warp though (I don't know anyone personally who has ever had to replace them on any bike).
__________________
UK to Mongolia 2009, on a DR350
Reply With Quote
  #10  
Old 1 Jan 2010
Registered Users
Veteran HUBBer
 
Join Date: Sep 2003
Location: East Sussex, England
Posts: 171
Clutch thrust washers

Quote:
Originally Posted by Nath View Post
The dr350 has a few known problems with a dragging clutch, ......Bent or worn washers are apparently another cause of the same symptoms. Maybe the 650 suffers the same way?
True that. My DR350 clutch dragging was fixed by replacing the two fat thrust washers either side of the clutch basket. The groove worn into each was very obvious. But I can't say the same definitely applies to the DR650.
Reply With Quote
  #11  
Old 2 Jan 2010
beddhist's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Sep 2003
Location: Whangarei, NZ
Posts: 2,214
Quote:
Originally Posted by Nath View Post
I've seen grooves in the clutch baskets of older bikes I've owned, but I've never been convinced that it's caused noticable drag (as in I've filed them away without the clutch drag I was trying to fix going away).
Good for you. Since this is about the DR650: I have filed my clutch basket and it made a significant improvement. Dto. on my CX500.
__________________
Cheers,
Peter.

Europe to NZ 2006-10
Reply With Quote
  #12  
Old 10 Jan 2010
Registered Users
HUBB regular
 
Join Date: Sep 2008
Location: Yarm
Posts: 25
new problem

after changing the plates and springs, re-adjusting the cable etc the bike was back in working order however i have these new problems;

1. bike will only engage in neutral with the bike rolling or once the engine has been switched off.

2. bike creeps forward when stopping at lights etc

3. just occurred, the engine makes a disturbing clacking sound now and again like the gears are disengaging usually when given throttle climbing hills. this happens more when the engine is cold than hot. (i adjusted the clutch cable and tightened the drive chain and this briefly solved the problem for a few days but it has since returned? could it be due to 20w50 mineral car oil causing the clutch to slip???)

any thoughts duly appreciated.
Reply With Quote
  #13  
Old 12 Jan 2010
Nigel Marx's Avatar
Super Moderator
Veteran HUBBer
 
Join Date: Oct 2000
Location: South Island, New Zealand
Posts: 798
Points 1 & 2 are because the clutch is not disengaging completely.
The reasons can include:
Too much freeplay in the cable. At the lever you should have about 3mm of cable movement before you feel some firmness. Try adjusting out all the cable freeplay to test. If you leave it like this then you run the risk of the clutch slipping but it's a good way to test.

Cable not routed correctly, so there is sharp bends (pull the clutch in and turn full lock to lock. The tension on the lever should remain the same) or the outer has been crushed at full lock by the steering stops.

Worn clutch basket. Use a file to dress up the grooves in the fingers of the clutch basket. You will have to pull the clutch out to do this.

Warped metal plates. Take them out and press down of a known flat surface eg. plate glass. If there is any wobble, you need new ones.

Incorrect assembly! This is a difficult one because it's hard to know what is the correct assembly, once you have got it wrong. My suggestion is to study the clutch carefully as you take it apart and try and see if anything looks out of place. Always take lots of pictures with a digital camera on dissasembly!

Incorrect parts fitted. Are they OEM Suzuki plates that you fitted? I'm a firm believer is using after-market parts, but only from brands I know.



The clacking sound is very odd. The only way I can see it coming from the clutch is if you took the entire clutch basket off when you changed the plates (and you don't need to do that to get to the plates), and then put something behind the basket to the point where it is no longer engaging properly with the driving gear on the crank. I can't see how you could do this so it's pretty unlikely.

I think it's something else, and the chain/sprocket set is what comes to mind first. Forgive me if I'm treating you like a mechanical idiot, but do you know what the chain and sprocket service limits are? It may be that one or both sprockets are worn out enough to let the chain slip over the teeth. If this is the case then the chain will be shagged too. Tightening the chain will stop slipping happening, until the chain stretches a bit more. The teeth of both sprockets should be evenly shaped and not hooked one way or even missing! Pulling the chain away from the back sprocket shouldn't let more than half the teeth show under the chain.
It really can't be an oil issue. If the clutch slips, it's a silent event.

Hope this helps and keep the questions coming. We ARE here to help.

Cheers bloke,

Nigel in NZ
__________________
The mouth of a perfectly contented man is filled with . -- 2200 BC Egyptian inscription
Reply With Quote
  #14  
Old 13 Jan 2010
Registered Users
HUBB regular
 
Join Date: Sep 2008
Location: Yarm
Posts: 25
cheers for the feedback. i think its likely the chain/sprocket is on its way out.

i'm certain i re-assembled the clutch correctly, like you said lots of digi photos and really organised...didn't touch the basket. The chain is the original one when i bought the bike because the new replacement that i stuck on before the trip snapped and buckled after about 8000km cheap import stuff.

I guess i'll just keep tightening the chain for now and see what happens!

cheers mate
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
clutch change kito Yamaha Tech 1 16 Mar 2009 23:26
Wanted CDI unit for a 96-06 Suzuki DR650se skip TRAVEL Equipment for Sale / Wanted 1 25 Oct 2006 18:24

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 14:00.