Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Suzuki Tech
Suzuki Tech Suzuki Tech Forum - For Questions specific and of interest to Suzuki riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 1 Oct 2011
Registered Users
HUBB regular
 
Join Date: Oct 2009
Posts: 32
More power from dr 650??

My project is to take apart my dr and rebuild it.
Why??

well...

the engine has 16000 miles on it with full service history, but the bike is looking like it would benefit from a make over.

i wasnt intending to do anything with the engine...

although....

why not see if i can increase the power somehow.

there is a k&n filter on it.
i know i can put an exhaust but the power gained is :confused1:...

surely there is something i can do to the engine or carb .

any thoughts people...

im starting this project after chritmas and will be keeping records and photos as i go.

im in no rush to do it.
Reply With Quote
  #2  
Old 1 Oct 2011
Registered Users
Veteran HUBBer
 
Join Date: Nov 2008
Location: poole dorset
Posts: 148
Not sure about extra power really, maybe a flat top piston, polished ports and higher lift cam..

But do check you camshaft for wear and the head as the cam runs straight in the aluminiun with no bearings. Also check the lobes for wear. On mine the cam had scored the head and the case hardening wore on the cam lobes, also the gears were wearing at 16000 miles although cant be sure it was the correct mileage.. The other thing to check is the engine drive chain as these can stretch and may need adjusting..
Reply With Quote
  #3  
Old 2 Oct 2011
Registered Users
New on the HUBB
 
Join Date: Oct 2011
Posts: 3
Quote:
Originally Posted by jimmyboris View Post
My project is to take apart my dr and rebuild it. Why??
well... the engine has 16000 miles on it with full service history, but the bike is looking like it would benefit from a make over. i wasnt intending to do anything with the engine...although.... why not see if i can increase the power somehow. there is a k&n filter on it. i know i can put an exhaust but the power gained is :confused1:...surely there is something i can do to the engine or carb. any thoughts people...im starting this project after chritmas and will be keeping records and photos as i go. im in no rush to do it.
The big questions are:

How much power do you want?
How much are you prepared to spend?

The DR650SE comes from the factory running REALLY weak (about 35WHP) and really rough compared to how it CAN run. You may not even realize just how poorly a stock DR runs until you start experimenting. Some people are getting over 50WHP from a DR650SE, but you may not need anywhere near that much. Just getting the bike to run smoothly, and improving the throttle response, can make the bike seem like it's putting out WAY more power, when it may be just a minimal increase that is delivered better.

The stock exhaust isn't a huge problem for power until you upgrade other things. Most people swap it out because it is a heavy boat anchor and/or they're looking for more power. More power is possible with it still bolted in place though, but it IS a bit limiting if one is going for big increases, especially the blob of weld that is usually in the header pipe. Many people grind this blob smooth for better flow.

The big initial limiters on power with the DR650SE are the stock airbox and the jetting that is extremely lean for use at/near sea level. Opening up the airbox by removing the snorkel, cutting the top, or cutting/removing the sidecover will allow the engine to breathe much easier. To better take advantage of this airflow though, you'll also want to jet the carb a bit richer. At the same time, you can improve throttle response by drilling a 2nd hole in the slide and/or trimming a slight amount off the slide spring. Research this heavily before doing so though. There is a point of diminishing or negative returns. Once these mods are made, THEN the stock exhaust will start to become a limiting factor.

I recently swapped in a richer main jet, cut the top of my airbox, swapped in an adjustable pilot needle, and swapped in an extended idle mixture screw. I still have the stock header pipe and haven't ground the weld smooth, but I do have an FMF Q2 free-flowing muffler and midpipe (light, loud w/heavy throttle, quiet w/light throttle, needs occasional repacking). My stock pilot jet seems a bit rich right now, but other than that, my DR runs WAY better than it did with the stock main jet, the stock idle mix screw, and a KTM adjustable needle paired with this FMF exhaust and an airbox with a few small holes cut. It now idles smoothly, pulls 5th gear smoothly from 45MPH indicated, spans the wide-ratio tranny gearing MUCH better, pops the front wheel up easily in 1st and 2nd with no clutch or tugging, and pulls like a freight train with a passenger and luggage aboard...from idle to well beyond any legal speed in this country. I also still seem to be getting about 50MPG (US). I WOULD like to swap this FMF Q2 muffler to a 2001/2002 GSX-R1000 titanium muffler, as it flows about the same but is slightly quieter, slightly lighter, and never needs repacking.

I'm now curious how powerful this thing would feel with a flatslide pumper carb, a 780cc big-bore kit, a big-valve head, a Webcams 223 cam, and a sprocket change. That would be well into 50+WHP territory, and I haven't even mentioned forced induction or nitrous yet. (Yes, there ARE a few people experimenting with that stuff, and a mfr HAS actually brought a turbo kit to market for the smaller Yamaha WR250R/X...so it COULD potentially be done. There are also a few people currently adapting/experimenting EFI on the DR.)

Google "Procycle" and "Kientech" to find performance parts and more info for your DR. They both offer a LOT of info over the phone or web.
Reply With Quote
  #4  
Old 20 Oct 2011
Registered Users
New on the HUBB
 
Join Date: Oct 2011
Location: Big Lake MN
Posts: 10
I added a lot to mine by changing the exhaust and changing out the carb. A great resourse is Here. I spent a total of about $700 for the carb, exhaust, and midpipe required to install the GSXR exhaust.

MXRob is an expert on this. He sells the carb as a bolt on after he has done the rebuilding and modifying.

I now have a lot more useable low end power, much stronger acceleration, and no surging.

Good luck!
Reply With Quote
  #5  
Old 2 Jan 2012
Gold Member
Veteran HUBBer
 
Join Date: Mar 2001
Location: British Columbia
Posts: 246
DR power increase

From the research I have done:
Stage 1: Drill the airbox 'airbox mod', re-jet the carb, grind out the header pipe weld (where it exits the engine). Pretty minimal cost, and will give you better, smoother access to the power if only marginally increasing the HP.
Stage 2: Pumper Carb modification a'la MXRob (mentioned above) and a better flowing exhaust - one or both at the same time. The '01-'02 GSXR 1000 (best) or 600/750 (still good) pipe is recommended as the top choice for performance/ weight/ noise balance. Both bolt on with an adapter mid pipe ($210).
Stage 3: Big bore and hotter cams, head work, etc. I'm sure there is 50hp in there somewhere, but personally I think pushing the DR650 this far defeats the point and takes away from what really makes this bike excel as an adventure touring option- low cost, durable, frugal, simple to fix, etc.

I just picked up a low km '08 model, have found a GSXR pipe and am planning on doing the airbox cut out and re-jetting of the stock carb. From other owners reports, that seems to yield the best bang for the buck, while still keeping the fuel economy and durability at stock levels. Great bike, I'm looking forward to setting it up for back-road touring.
Reply With Quote
  #6  
Old 12 Jan 2012
Registered Users
Veteran HUBBer
 
Join Date: Jan 2012
Location: Miami/Managua
Posts: 211
this particular horse has been beaten to death 6 times over on the DR thread on ADV. i would bet a lot of dough that EVERY conceivable manner of squinching out all the power from the DR has been discussed on that thread which as of today had 59,055 posts and is been going on for over 5 years.

tons of good info and very knowledgeable folks there.

the DR650 thread - ADVrider
__________________
'07 DL1000 '08 DR650
Reply With Quote
  #7  
Old 22 Feb 2012
Registered Users
HUBB regular
 
Join Date: Jan 2011
Posts: 90
Brakes

I've dynojetted mine and done all the airbox stuff that Jesse at Keintech recommends. My problem is the brakes are so crap that I don't want it to go any faster!
__________________
www.wollongongtowoolwich.co.uk
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
12v Power Socket & GPS Power Lead Trichelia Yamaha Tech 7 29 Apr 2010 11:13
how much power? bergspre Yamaha Tech 20 4 Mar 2010 10:43
Getting more power from the XT *Touring Ted* Yamaha Tech 1 19 Dec 2006 05:04
power martync Yamaha Tech 0 29 Sep 2003 15:44
power up crashedupderby Kawasaki Tech 3 17 Mar 2003 04:51

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 15:32.