Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Suzuki Tech
DRZ 400 axle pullers.... DRZ 400 axle pullers....
Register FAQ Calendar Today's Posts
Suzuki Tech Suzuki Tech Forum - For Questions specific and of interest to Suzuki riders only.
Photo by George Guille, It's going to be a long 300km... Bolivian Amazon

I haven't been everywhere...
but it's on my list!


Photo by George Guille
It's going to be a long 300km...
Bolivian Amazon



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 28 May 2010
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
  
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
DRZ 400 axle pullers....
Not seen any available, so I thought I'd make a pair by cutting the hex spindle removal tool in half, drilling it out to 12mm to reduce weight and then drill a 6mm hole through it so enable a 6mm steel bar (actually a support stay from an office paperwork tray) in place before welding to the end of the spindle/axle itself. Took an hour or so to make a pair from one hex tool, cost was zero, the tool can't be lost as it's welded on and it frees up space in the toolkit.







__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #2  
Old 28 May 2010
chris's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Jun 2000
Location: GOC
Posts: 3,326
I use a tapered 24mm rear axle wrench (I think it's in the original DRZ tool kit anyway) and push it into the front axle hole and rotate it a bit to free it. Then push the other end of the axle while rotating it a bit more. Comes out very easy.
Chris
Reply With Quote
  #3  
Old 28 May 2010
chris's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Jun 2000
Location: GOC
Posts: 3,326
Quote:
Originally Posted by chris View Post
I use a tapered 24mm rear axle wrench (I think it's in the original DRZ tool kit anyway) and push it into the front axle hole and rotate it a bit to free it. Then push the other end of the axle while rotating it a bit more. Comes out very easy.
Chris
I think I have Alzheimers (or is it Parkinsons? ). The DRZ has the same size front and rear axle bolt doesn't it? I'll check in the garage now. Hence the 24mm wrench referred to above is for the front and back, not just the back.
Chris
Reply With Quote
  #4  
Old 28 May 2010
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
  
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
It's my girlfriends bike, she sometimes struggles with removing the spindle herself, hence this mod. She's taking the bike to South America soon, just want it to go as easy as possible.

I don't have a problem with DRZ spindles but using the puller is certainly easier than tugging on a greased spindle.
__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #5  
Old 29 May 2010
Mickey D's Avatar
Moderated Users
Veteran HUBBer
  
Join Date: Jan 2010
Location: California
Posts: 501
Good idea! For years many MX and Enduro bikes came stock with these little "quick change" gadgets! Very handy for racers doing ISDE style tire changes. (3 min for total tube/tire change) Don't even have to take your gloves off to pull the axle.

Next you'll be rigging cables for the shift and brake levers to keep them from being yanked off or bent into a U by a root, rock or in a fall. Very handy too, easy to rig.

Maybe upgrade the rear disc guard to a true Alu "Shark Fin" style guard. The plastic ones break easy.

How about a front disc guard? These used to be very popular. Now, almost no one uses them. But just recently (after being gone 10 years) I'm seeing many of the US Super Cross guys using a plastic front disc guard again.

Protects not only the rotor but also the caliper and brake line. Front disc guard was one of my favorites on my race bikes. So many hairy crashes, never a bent rotor or damaged caliper.


My former DRZ-E .... pretty good desert bike ... not so good in the woods.
Reply With Quote
  #6  
Old 29 May 2010
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
  
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
I'm thinking about making something that prevents the front brake hose on my 950SE being snapped off 65 miles from home..... Don't ask what's prompting me.

I had the handguards not done up quite tight enough and the master cylinder bolts not quite slack enough. Came off on a wet chalk trail in Surrey, guard mount rotated & snapped the brake hose banjo. The rear brake operating rod also disconnected itself (fixed the rear in 30 seconds), front hose requires the spending of cash. I could have some Yorkshire blood in me, short of arm & deep of pocket......

I can see the point of disc guards if riding over rocks etc but not on a bike just used for trailriding.

Nice DRZ-E, not seen yellow sidepanels before, only white? Are they standard E fitment?
__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #7  
Old 30 May 2010
Mickey D's Avatar
Moderated Users
Veteran HUBBer
  
Join Date: Jan 2010
Location: California
Posts: 501
Quote:
Originally Posted by Steve Pickford View Post
I'm thinking about making something that prevents the front brake hose on my 950SE being snapped off 65 miles from home..... Don't ask what's prompting me.

I had the handguards not done up quite tight enough and the master cylinder bolts not quite slack enough. Came off on a wet chalk trail in Surrey, guard mount rotated & snapped the brake hose banjo. The rear brake operating rod also disconnected itself (fixed the rear in 30 seconds), front hose requires the spending of cash. I could have some Yorkshire blood in me, short of arm & deep of pocket......

I can see the point of disc guards if riding over rocks etc but not on a bike just used for trailriding.

Nice DRZ-E, not seen yellow sidepanels before, only white? Are they standard E fitment?
I run my hand guards TIGHT, but use loc-tite on handlebar mounted controls and just keep them snug ... so they can move in crash rather than snap off, break a master cylinder or clutch or brake clamp. Hand guards will move in a crash but not too much and not coming off a jump. Snapping a banjo up there is unusual.

That DR was a 2001, US version, E model. All stock save the obvious extras and all carb and jetting mods. Ran like stink. Perfect. I owned it for four years. Wish I could still have it. Easy to work on .... cause you never have to!

It is rare to damage a brake rotor or caliper trail riding but for $20 and 4 ounces of plastic, to me it is worth it. They don't make on for my DR650. Traveling, the guard can prevent vandalism or people "fiddling" with the rotor, brake line or caliper. I like it.
If they did, I'd run it. Years ago I ran a Flo Orange one on my XR-L and man ... NO ONE pulled out on me. You could see that plastic Orange disc guard 100 meters away.
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
TD5 Axle? roamingyak Light Overland Vehicle Tech 2 25 Apr 2009 18:31
Collapsible (or very small) axle stands CornishDaddy Equipping the Overland Vehicle 10 14 Oct 2008 14:57
Extending axle breathers danielsprague Equipping the Overland Vehicle 9 26 Jan 2007 10:33
Front Axle Lube danielsprague Equipping the Overland Vehicle 3 15 Dec 2005 14:04
Front Axle Clamp Bolt Torques? davidlomax BMW Tech 3 24 Jun 2005 06:06

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

Your ad could be here, on EVERY page of the HUBB, or the whole website, or as many as you like!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.



All times are GMT +1. The time now is 07:54.

Contact Us - Horizons Unlimited Motorcycle Travellers Website - Archive - Privacy Statement - Top