Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Suzuki Tech
Suzuki Tech Suzuki Tech Forum - For Questions specific and of interest to Suzuki riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Like Tree6Likes

Reply
 
LinkBack Thread Tools Display Modes
  #76  
Old 6 Aug 2007
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,822
No doubt the GIVI bags look goofy on the DR... .but it's what I had laying around. I know the Pelicans and would certainly consider that set up, thanks for the heads up!

I know they are tough bags...I have used them in my work since 1985. Even got a couple free ones when baggage handlers did minor damage to two of mine in Africa.

I'll look into them and adapting them to the GIVI racks.
I don't like the way they open that much...all your stuff falls on the ground.
I guess you have to get the inner bags?

If the GIVI's get busted up i'll just jetison them and use a large duffel bag found locally or have leather saddle bags made. The GIVI's you see on there came off my old Vstrom, which hit the ground twice....just some scrapes on the GIVI's. No other damage. Just lucky I guess.

Bark Busters coming...they are cheapo ones (TusK) so not sure how they'll work. Thanks to Lone Rider and others I've narrowed down my tires.
More to do:
Ordering new chain and sprockets next. (DID VM X ring)
Installing HD Metzeler tubes w/SLIME.
Decided against windshield after doing several long rides.
Still to do Springs front & rear.
Paper work, reading and research.

What am I missing?

Cheers!

Patrick
__________________
Patrick passed Dec 2018. RIP Patrick!
Reply With Quote
  #77  
Old 6 Aug 2007
Registered Users
Veteran HUBBer
 
Join Date: Nov 2004
Location: USA
Posts: 992
[QUOTE=mollydog;146281].........What am I missing?

................QUOTE]


Inline fuel filter....and a bottle opener....:dunno

When are you going, generally where and for how long?
Reply With Quote
  #78  
Old 7 Aug 2007
Registered Users
Veteran HUBBer
 
Join Date: Nov 2006
Location: Canada
Posts: 738
Re: Bags

Yep, I tend to use what I already have as well so I can certainly see the merit in not spending any more money

The Pelicans become much more user friendly when attaching a small wire from the opening lid to the main compartment that prevents it from opening more than about 80-90 degrees. And as you suggest, inner bags are great because you can grab them and carry into your accomodation without bringing the dirt along. The specifically made ones are about $100 online or a approx. smae sized old duffel or back pack works pretty darn well. And if I can find the right seamstress in some small town...
Reply With Quote
  #79  
Old 7 Aug 2007
Registered Users
Veteran HUBBer
 
Join Date: Nov 2004
Location: USA
Posts: 992
Pelicans....

They're secure, tough...and heavy. They can be mounted by the lid, rather than the bottom, which can help in packing and unpacking.

What are you packing that can't be carried in soft side bags and a soft rear bag?
Reply With Quote
  #80  
Old 7 Aug 2007
Registered Users
Veteran HUBBer
 
Join Date: Nov 2006
Location: Canada
Posts: 738
I like the suggestion about mounting at the lids.

Yes heavy, but no more so than a set of aluminum panniers.

Soft bags, much lighter. Good for many applications, especially shorter trips and yes carry most things. But on longer trips tradeoff is:

1. Slightly improved security for hard bags which depending on your ride you may or may not need. For example, popped into the monastery in Kharkorin in Mongolia and left hard bags locked outside in front of vendor area. Felt fairly secure that someone wouldn't sidle up to the bags unnoticed and go through noticable effort required to break in. Would not have felt secure leaving a simple soft bag where the the usual crowd milling around squeezing the levers could have gone through the bags without too many people noticing. Personal perception I agree, but I certainly would not have felt safe enough to leave a soft bag unattended, even with a lock.

2. Crashability: They simply bounce better. At low to moderate speed crashes they simply bounce and don't require any straightening. The attachment hardware or racks might depending on your system, but the good old soft bags will eventually get a little ripped and torn and require some repairs or extensive bungee cording. It can be done, and when you get to a town you can get them sewn up or a rack made to hold them but after a while they may not work as well they originally did. Of course, that is all moot if you never crash
Reply With Quote
  #81  
Old 7 Aug 2007
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,822
Quote:
Originally Posted by Lone Rider View Post
Inline fuel filter....and a bottle opener..dunno
When are you going, generally where and for how long?
Thanks for the reminder. I've got a couple I'd like to try out. Which ones work the best on the DR? The IMS tank limits space and hose routing...ideas?

Bottle opener? ah, right....not many twist offs down south!

I'm trying to leave in September. Plan is to see some place in Mexico I haven't seen in years. Real de Catorce and the dirt roads around there (Peyote country), some of the highland towns, a friend in Oaxaca, southern coast.

Explore some of Guate, visit where I used to live in Solola', onto Salvador for some water sports, Caribean side of Honduras, Nicaragua, Costa Rica.
Panama? Not sure. Need help there. I may continue on, depending on time and money...into S. America to hook up with friends in Argentina in January. All this time premitting.

Quote:
Originally Posted by Lone Rider View Post
They're secure, tough...and heavy. They can be mounted by the lid, rather than the bottom, which can help in packing and unpacking.
What are you packing that can't be carried in soft side bags and a soft rear bag?
Good question. Nothing special. I could easily go with soft bags, I just want to try something new. I've done three multi-day dual sport rides with the soft bags. Even for just a 4 or 5 day ride....they were FULL! I guess I need to lighten up. I know how to do this...(honest) but don't want to! I'm old, and set in my ways. I may change my mind yet. Some serious thinking/evaluation about this now.

Mountain Man,
Thanks for all the great comments too! I didn't know the Pelikan lids were strong enough to mount. Interesting.

The whole security issue is always of concern too....nice outline.
i've been there. I've also learned not to have cool doo-dads on my dash or handlebars. Quick and clever fingers will see them disappear in an instant.

Will update this soon....thanks to all!

Patrick
__________________
Patrick passed Dec 2018. RIP Patrick!
Reply With Quote
  #82  
Old 7 Aug 2007
Registered Users
Veteran HUBBer
 
Join Date: Nov 2004
Location: USA
Posts: 992
Quote:
Originally Posted by mollydog View Post
Thanks for the reminder. I've got a couple I'd like to try out. Which ones work the best on the DR? The IMS tank limits space and hose routing...ideas?..............
You can find paper filters in clear plastic case at most all auto parts chains. They're commonly used for lawn mowers.
You will need to loop some fuel line. I recommend using regular 1/4" automotive fuel line. It's cheap and doesn't kink near as easily as tubing.
I can send a pic of my setup (screw up) if that would help.
If you decide to use this and loop some line, remind me to explain about air pockets and what to watch out for.

Sounds like a fantastic trip, really. :thumb

Take one spare oil filter. If you start with a fresh one, that one spare can take you to 15k miles following mfger recommendations.

Plugs are spec'd for 12k, but I put close to 20k on my first set, and they still ran fine.

You know that 14t front will wear your chain faster...but that's life.

Be careful with the soft alum threads on the oil filter cover thingy. I just had to tap mine out to 1/4".

Check the front brake line where it routes inside the left fork and see if it's rubbing 'into' the soft fork.

Take a multi-meter.
Reply With Quote
  #83  
Old 8 Aug 2007
Registered Users
Veteran HUBBer
 
Join Date: Nov 2004
Location: USA
Posts: 992
Fuel filter, self supporting..

http://velvtride.smugmug.com/photos/181527249-L.jpg
Reply With Quote
  #84  
Old 8 Aug 2007
Registered Users
New on the HUBB
 
Join Date: Oct 2005
Location: Patten,Maine
Posts: 4
No clamps on line?
__________________
Martial, I ride therefore I am. DR650, R1100RT,HD FLHS
Reply With Quote
  #85  
Old 8 Aug 2007
Registered Users
Veteran HUBBer
 
Join Date: Nov 2004
Location: USA
Posts: 992
Quote:
Originally Posted by Win38-55 View Post
No clamps on line?

None needed.
Reply With Quote
  #86  
Old 8 Aug 2007
Registered Users
HUBB regular
 
Join Date: Feb 2006
Location: Durango, Colorado, USA
Posts: 26
Quote:
Originally Posted by Lone Rider View Post
If you don't need a real knobby style tire, maybe give the IRC GP110 a try. It's an unusual design and works very well on the road. I've gotten 5k each from 2 rears and many miles (I forget) from a front.
Chaparral has them at decent prices. Even the 5.10 will fit, if you want to go fat.
Bob, our '00 DR650 had GP110 tires on it when we first bought it (used) about 4 years ago. I always thought they were a great tire for the DR650 if knobbies like the Dunlop 606 tires weren't required. Because of the riding we have locally between Moab and the San Juan mountains, the D606 tires are what we use, but were we to do a trip like your Mexico trip, I think the GP110s would be about ideal.

Oh, before the last trip we took to Moab on the DR650s, I adjusted the valves on my '05. I got about 1/4 mile before the bike quit. I had forgotten to "bleed" the looped fuel line I use with the IMS tank when I reinstalled the tank. I seem to make that mistake about once a year...
__________________
Pain in the Butte Ranch
Durango, Colorado

Last edited by FatChance; 8 Aug 2007 at 18:51.
Reply With Quote
  #87  
Old 8 Aug 2007
Registered Users
Veteran HUBBer
 
Join Date: Nov 2004
Location: USA
Posts: 992
Quote:
Originally Posted by FatChance View Post
.......... I had forgotten to "bleed" the looped fuel line I use with the IMS tank when I reinstalled the tank. I seem to make that mistake about once a year...
It happens to me if I forget to switch to reserve quick enough. I think that problem often gets blames on the petcock, which it's not.

I remember reading about a rider who 'turned' the carb inlet tube. Used a vise and some pliers, I think.

A simple bleed valve could be added to the line - just ain't done it yet.

The only rear knobby I've run on the DR has been the 606, and that was on the Divide Ride. I feel like I'm throwing money away because they don't last many miles, but it sure does inspire more confidence...and speed.
Reply With Quote
  #88  
Old 9 Aug 2007
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,822
Cheapo Tusk Handguards are a SCORE!

With some trepidation I bought the Tusk Handguards from Rocky Mountain. I've owned many handguards over 20 years on dirt bikes...Acerbis, Moose,
MSR, and more. Most cost between $80 and $100 with all the fitting kits.

I feared the worst.....but low and behold the $30 TUSK items are not only the best quality of ANY Alu handguards I've seen, but also have the most clever mount system that offers the best adjustability of any I've mounted. Being cheap I did not order the kit for $15 to allow them to fit on Pro Taper Fat bars. Nor did I order plastic shields but choose instead to re-use the stock DR
ones. I used my grinder to "widen" the standard pieces to fit Pro Tapers. No problemo, ten minutes and all fit nicely.

The cam insert that goes into the end of the bar is clever too....for standard 7/8" bar you use the rubber insert, for Alu bars go without it. I did have to grind just a hair off the insert collar. Easy.

I did not have to cut the ball ends off the levers, only angle them down, as they should be anyway. No serious interference from clutch cable or brake line or wires. Check 'em out.





Patrick
__________________
Patrick passed Dec 2018. RIP Patrick!
Reply With Quote
  #89  
Old 9 Aug 2007
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
Mollydog,
Looking good, in particular they look strong! (and that is a great price).
I've tried a quick internet search and there are lots of outlets for these in the US but not much showing up for Europe or elsewhere.
I guess you are now about ready to travel.
Regards,
__________________
Dave
Reply With Quote
  #90  
Old 10 Aug 2007
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,822
Working on Tool Kit. Discovered several sizes not on the DR650....like 17mm. Only the mirror bolt. OR....13mm.
Haven' found any on external nuts and bolts....inside the motor, trans or clutch these sizes may exist...I Don't plan any roadside rebuilds.

So I'm leaving my 17mm and 13mm wrenches/sockets behind. Also, I've limited my Allen Key set to DR sizes only. I think three are used.

Old Tool kit


The new kit (still in progress) shown contains supplies and parts too. I use four places to stow all this stuff, and several things aren't shown. Like tire irons which are in bash plate. Hard parts mostly go in PVC tool tube under bash plate, stock tool kit holds tire repair and nut/bolt kits (extensive). Elec.gack in tail pack with glues, Volt/ohm meter, and much more. Other stuff in hard bags and Camelback Mule bag. Too much crap!

Patrick

__________________
Patrick passed Dec 2018. RIP Patrick!

Last edited by mollydog; 10 Aug 2007 at 01:45.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted Acerbis 22/25L Dr650 Tank Gipper TRAVEL Equipment for Sale / Wanted 7 14 Apr 2007 16:57
Dr650 Cracked frame Donn Suzuki Tech 5 24 Feb 2006 02:53
DR650 Bulletin Board PeteSC Suzuki Tech 2 19 Jun 2004 01:10

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 14:02.