Husqvarna 610te '98 reassambling -help
 

I have splitted the engine on my Husky 610te '98 to change the crankshaft and now I have found four small magnets sticking to the backside of one of the gear cogwheels. They are certainly not supposed to be where I found them and furthermore I can't seem to find any place where they could be placed.

Anyone who knows if they are supposed to be in the engine?

It is very possible that they have slipped in from the working table I was standing at when I disassembled the engine and there is another magnet by the camchain to grab metal spuns from the oil


Thanks!

Troels