Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > KTM Tech
KTM Tech KTM Tech Forum - For Questions specific and of interest to KTM riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 26 Feb 2009
Registered Users
New on the HUBB
 
Join Date: Oct 2007
Location: Cork, Ireland
Posts: 17
Loss of power in LC4

Hi all,

I’m in Peru at the moment close to the city of Cusco, touring south America, on my KTM LC4 400, the military version described in anther thread here.

I have a problem at the moment where I appear to be losing compression. I can only drive at 10 or 15 km/p/h and I cant get the engine to rev high.

Now this problem first appeared yesterday when soon after filling up with petrol the bike started lurch and hesitate on acceleration. There was a village 20 km up the road and I thought i´d change petrol there. There was no petrol there so I decided to return to the previous village. Halfway on the way back my bike lost power and would only drive at 10 km/p/h and wouldn’t rev high. Thinking my carb was dirty or fouled I stopped at a mechanic and we totally cleaned the carb and the jets etc (which were a little dirty). It made no difference whatsoever. Using a finger down the spark plug hole we found out that the compression was bad. Looking at the valve clearances, the injection ones were very very loose. The exhaust clearances were ok. Tightening the admission tappets up made a huge difference and it was almost back to normal. I didnt drive any more that day.
So today I got new petrol in a different station and filtered it this time. I drove off and 1 or 2 km up the road the same problem happened, where my power totally went and I could only crawl along.

Now whats weird is I had only tightened the valve clearances the day before. I had last adjusted them in Chile around 2,000km previously where both admission and exhaust were pretty good (only a little bit too tight). Whilst driving to Cusco I heard that they sounded loose again but put the noise down to the altitude – for the last 1,000 odd km i´ve been at approx 2,500 to 5,000 meters. I checked them in Cusco and found that the admission valve clearances were really very very loose so tightened them up there (exhaust were fine).

I also noticed that there appeared to be a slight hole/tear in the oil pipe going from the frame to the exhaust valve hatch. There wasn’t any oil around the area and so I just patched it up with insulation tape.

My oil looks fine through the view window and dipping a magnetic screwdriver in shows no metal flakes. My coolant level is fine and looks fine.
Because of the altitude I took off the lid off the airbox to get power (don’t have smaller jet), the air filter is clean and oiled.
I´ve been running on 90 octane petrol (cant get 95 here) for the last 1000 odd km and changed the switch on the CDI to 80 octane.
The manual says to use 10W50 oil but there is none in this part of the world so i´ve been using 20W50, either motul or bel-ray

So i´ve organized a pick up truck to take the bike and me back to Cusco (nearest city) later today. I´ll probably try and take the bike to a mechanic there.

Any thoughts on what might be the problem would be gratefully appreciated.

- Eamon

PS going to post this over on adv rider as well.
Reply With Quote
  #2  
Old 26 Feb 2009
strimstrum's Avatar
Gold Member
Veteran HUBBer
 
Join Date: Aug 2008
Location: Alcester UK & Idilevo, Bulgaria
Posts: 329
Eamon

Don't know the answer to your problem myself but I have posted your query on the UK KTM forum to see if anyone does. If someone comes up with something useful I will post it here.

Martin
Reply With Quote
  #3  
Old 27 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Nov 2006
Location: NorthVancouver Island
Posts: 137
Most likely an intake rocker roller bearing failure.... You've got a few replies on ADV...
Reply With Quote
  #4  
Old 27 Feb 2009
strimstrum's Avatar
Gold Member
Veteran HUBBer
 
Join Date: Aug 2008
Location: Alcester UK & Idilevo, Bulgaria
Posts: 329
Eamon

Only one reply on the KTM forum so far .....


"Lack of compression would suggest a broken piston ring or worn valve guides."
Reply With Quote
  #5  
Old 27 Feb 2009
Nomadic1's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2007
Location: Sheffield, UK
Posts: 103
Yea I'd agree. Sounds like you're heading towards a catstrophic failure if you're doing them on what seems a daily basis. Best to suggest you take your top end apart to have a good luck and see whats going on.
__________________

Visit my space here
See my photos here
Reply With Quote
  #6  
Old 28 Feb 2009
Registered Users
New on the HUBB
 
Join Date: Oct 2007
Location: Cork, Ireland
Posts: 17
Thanks to all for your replies.

I tryed going through a few easy tests today before taking her to a mechanic. It was raining very heavy here today (more so than usual for rainy season) and the bike is outside so i didnt get much done.

What i did do is do a compression check. The first reading was 50 PSI (344kPa). Then i put a couple of ml of engine oil down the spark plug hole and re-measured, this time the reading was 55 PSI (379 kPa).
Now my manual doesnt say what the compression readings should be so i cant read much into these numbers. Does anyone have a idea what they should be?
Bear in mind that its a 400cc LC4 not a 640. The 400 manual says the ratio is 10.3:1, the 640 manual says 11.5:1

I also drained the oil and looked at the sump magnetics. There was a lot of metal on them. Normally i might see a speck but there was a lot and some of them appeared biggish to me. I´ll try and post a pic later.

So tomorrow i´m going to track down a good mechanic. Anyone know one in cusco?

Thanks,
Eamon
Reply With Quote
  #7  
Old 2 Mar 2009
Registered Users
New on the HUBB
 
Join Date: Oct 2007
Location: Cork, Ireland
Posts: 17
Again thanks to all for your replies.

Well, i lifted the valve cover today and the intake cam follower bearing had broken in pieces. The resulting particles have damaged the cam shaft itself, most of the bearings on the camshaft and the rocker arms. I will post a few pics later.
The mechanic and I spent a few hours going around to the bearings shops trying find replacement bearings for the camshaft but could not find any. He reckoned it might be possible to repair the camshaft itself but that a new one would be better. There is a fair chip taken out of the exhaust. Any thoughts there?
I got a quote from KTM Lima for a replacement cam shaft and bearings and rockers for around US$600 and 20 days. However the mechanic forgot to say it was the 400cc LC4, so the quotes are for the 625, 640 or the 660. Would anyone have an idea if they would be the same?

Is there any chance that there are other problems lurking in the engine that I havent come across yet? I havent looked at the piston yet. What about all the metal that has been floating around (I even found an intact pin from the cam follower bearing in the sump oil). (Havent looked at oil filters or oil in the tube yet).

Thanks,
Eamon
Reply With Quote
  #8  
Old 3 Mar 2009
Registered Users
Veteran HUBBer
 
Join Date: Nov 2007
Location: Berlin, Germany
Posts: 109
Quote:
Originally Posted by eamofromcork View Post
Again thanks to all for your replies.

I got a quote from KTM Lima for a replacement cam shaft and bearings and rockers for around US$600 and 20 days. However the mechanic forgot to say it was the 400cc LC4, so the quotes are for the 625, 640 or the 660. Would anyone have an idea if they would be the same?

Most likely not, at least not the camshaft. I needed these parts in Chile and they didn't have the LC4 400 camshaft, I had to order it from Germany, it did cost 130 Euros + 170 for shipping and 100 for customs. I got it from KTM Sommer, they had it in stock. The shop doesn't exist anymore, they were taken over by KTM Team West (http://www.ktmteamwest.com). They do send parts to South America by courier and might have the part. If you can get everything for 600 US you would probably be better off though.
Peer
Reply With Quote
  #9  
Old 5 Mar 2009
Registered Users
New on the HUBB
 
Join Date: Oct 2007
Location: Cork, Ireland
Posts: 17
Thanks to all for your replies.

Well i got a little paranoid about the piston and rings and bore being damaged so we looked at that 2 days ago . Thankfully all was ok so the filters and magnetics did do their job.

I have decided to try a local repair job. The mechanic here is confident that he can get the camshaft "skimmed" through a lathe and get the chip/chunk that was taken out of the exhaust rocker arm soldered. Most of the bearings can be bought locally. The one bearing that needs machining is the cam follower bearing. Yesterday we found some suitable material for the new bearing. I guess if there is anywhere in the world where they are good at rebuilding engines it is here in Peru.

So its a cheap and quick fix. I will have to wait and see how good it holds up. I have around 10,000 or 15,000km left in my trip.

As for being stuck in Cusco, well its great spot to be stuck. Plenty to do and see nearby and lots of good people about. Highly recommened as a place to be stranded!!

Thanks,
Eamon
Reply With Quote
  #10  
Old 6 Mar 2009
Registered Users
Veteran HUBBer
 
Join Date: Nov 2006
Location: NorthVancouver Island
Posts: 137
Hello Eamon,

If your roller repair does not work and you become desperate to find parts... I have a couple spare intake rocker/roller assemblies on hand that would get you out of a bind....I'm about 10,000 KM up the coast so shipping would take a few days....

David...
Reply With Quote
  #11  
Old 6 Mar 2009
Registered Users
Veteran HUBBer
 
Join Date: Sep 2002
Location: Tomahawk,Wisconsin
Posts: 222
Island Hopper you are a good man!!!!

In Cusco do you know this place Eamo


The best bar in Cusco, Peru... Norton Rat's Tavern.

Ease the pain.
b
Reply With Quote
  #12  
Old 10 Mar 2009
Registered Users
New on the HUBB
 
Join Date: Oct 2007
Location: Cork, Ireland
Posts: 17
Thanks guys,

Well the new bearings have been made up and are on the rocker arm and i am still waiting for the camshaft to be fixed.

Island Hopper, thanks a millon for the offer. Really very much appreciated. Hopefully i wont be taking you up on it!!

Bill,i do know Nortans. Its a great spot for a few s. At least i picked a great town to get stuck in!

Thanks,
Eamon
Reply With Quote
  #13  
Old 11 Mar 2009
Registered Users
HUBB regular
 
Join Date: Apr 2006
Location: Frankfurt/Germany
Posts: 44
Check carefully for metal all tubes

Eamon,
I had a similar failure, however luckily in Chile where there is the most advanced KTM workshop in the South Americas... Run by a former German mechanic, Roland Spaarwater, today supporting KTM drivers in the Dakar in Africa and since this year in SA. I also know Diego M from the KTM shop Lima, he is more an Importer and can give little to no support on parts. KTM Sommer, now KTMTeamWest, is THE address if you need parts quickly across the world, but Diego can help you to get those parts through Peru customs as his contacts in Lima (Miraflores) are excellent. This speeds up things.
I would now recommend that you do very often your servicing of the filters and clean the magnet, although Peruvian mechanics are clever and great (I have a Taxi business in Lima that need tons of maintenance), the KTM needs its own parts. As I guess you are on your way South?!?, it would make sense to stop at Rolands place, either in Santiago or Chillian. They will have the parts, the bits needed to finish your trip as they supported me. His engine still runs today and has since survived to African Rallyes, now I use the KTM only on the street. While you have opened the "heart" now, please clean all parts and oil tubes very carefully (incl clutch area etc). And go to Nortons, drink a Cuscena, greet Chris (?) and put a remark in his book, you might either know or meet in the future some of his visitors. Cheers and Suerte
Rasmus
__________________
Rasmus
www.panamericana.info
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DRZ400s Weight Loss program... davidlomax Suzuki Tech 8 17 Jun 2009 21:17
loss of hand strength billys Staying Healthy on the Road 13 5 Sep 2008 16:35
Helmets and hair loss roadsacallin Staying Healthy on the Road 17 12 Nov 2007 18:35
ktm lc4 power loss!!!!!!!!!!!!! mjp.xrl KTM Tech 7 26 Oct 2006 17:02
1st power loss underload, now running badly? nickc BMW Tech 9 5 Mar 2006 05:58

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 00:21.