Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > KTM Tech
KTM Tech KTM Tech Forum - For Questions specific and of interest to KTM riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 26 Sep 2010
Gold Member
New on the HUBB
 
Join Date: Mar 2010
Location: Slovenia
Posts: 10
KTM 690 Enduro problems

After returning from my first trip with new motorcycle (KTM 690E) I noticed the following problems: Wear of upper tank bolts, one bolt was scratched the fuel hose and there was significant amount of dirt in the fuel tank.

Soluttinns are as follows:

I hope that Billet Filler Adaptor (sold by rally raid) would solve the issue.

I clamped fuel line with larger clamps to ensure the distance from the upper tank bolt.

Upper tank bolt wear is a complex problem. Since the vibration at the contact of frame and gas tank can not be eliminated, the new (better, harder) bolts will eventually wear too. The answer lies in the simplification of upper tank bolts in such a way that repair can be done anywhere in the world. Local metal industry workers made me a custom sleeve, and the remaining parts (bolt and washer) are standard.




The next step is to transfer weight from the rear of the motorcycle forward and relieve weight on the subframe. One solution is Aqualine Safari Fuel tank With this tank some 14 kg of weight is transferred to the front of the motorcycle. This solution was not interesting for me for several reasons.

If there is necessary to remove the motorcycle luggage due to the difficult terrain or obstacles on the way tank stays on the motorcycle while jerry cans can be removed and cary over the obstacle.
In the case of perforation of the tank, I will spend the rest of the way without fuel reserve, while new jerry cans can be purchased.

There is safety issue. If it is written that they are not street legal, it means they do not meet certain conditions and standards required by the traffic legislation. In the case of traffic accidents those tanks can become dangerous. In the event of spillage of fuel, fuel will be spilled over the rider and the ignition can be fatal. If jerry can spills, fuel will likely be spilled behind motorcycle. By putting the sign "not street legal" company is not liable for any injuries on the road.

For the next trip I will transfere some load from rear by fixing tool tube on skid plate and with some saddle bags mounted over radiator protection.

Last edited by matjaz; 27 Sep 2010 at 06:49.
Reply With Quote
  #2  
Old 27 Sep 2010
Mickey D's Avatar
Moderated Users
Veteran HUBBer
 
Join Date: Jan 2010
Location: California
Posts: 501
How long was your trip? How many Kilos of gear were your carrying?
How many Months traveling?

You must be one of the first to make travel bike with the 690. A few reports on this over on ADV rider. (ride reports or Thumpers forums)

Most bikes use Rubber bumbers/protectors/insulators to secure fuel tank and avoid vibration "wear" on the tank or stressing bolts.

How do you carry your luggage on your 690? Tank Pannier, Back pack?
Rear pannier? I don't see much of a sub frame on the 690. How strong holding luggage when riding hard off road?

How many Kms. on your bike so far?

Cheers!
Reply With Quote
  #3  
Old 27 Sep 2010
Gold Member
New on the HUBB
 
Join Date: Mar 2010
Location: Slovenia
Posts: 10
In one month I visited Morocco and Mauretania to Senegal and back (app. 10.000 km). About 90% god paved road. In Mauritania, I drove along partly sandy tracks (maybe 500 km) and in Morocco at the high atlas about 100 km of rocky trails, and about 600 km of good gravel roads.

How I carried the luggage you can see from the pictures.

Picasa Web Albums - matjaz - afrika 2010

Together with metal panniers, 4 liters of water, 20 liters of spare fuel, 4 liters of synthetic oil and food for three days, I carried about 75 kg. On the next trip I will took a lighter tent (1 kg less), lighter and fewer tools (2,5 kg less), lighter tarp (1 kg less), fewer spare parts (2 kg less), no photo tripod (3 kg less), no hammock (1,5 kg less), no synthetic oil (4 kg less), only one lens (2 kg less), etc. All together 15 to 20 kg less. I have serious thoughts to remove aluminum panniers and mount jerry cans on pannier rack. In this way I will get rid 7 kg of weight (in total 20 - 25 kg lighter).

I hope I can transfer about 15 kg of equipment to the front of the motorcycle, so that subframe will be loaded with 40 kg, of which half is the reserve fuel.

KTM use ruber insulators for fuel tank, problem is the metal bracket on the inside of the tank. During vibrations, bracket is harmful to the upper tank bolt.

I bought my motorcycle in September 2009, so far I have traveled approximately 18,000 km. (I use it all summer for business driving).
Reply With Quote
  #4  
Old 27 Sep 2010
Mickey D's Avatar
Moderated Users
Veteran HUBBer
 
Join Date: Jan 2010
Location: California
Posts: 501
Thanks for the great info and photos on Picassa.

Sounds like the KTM is working well for you. I am amazed your KTM can handle so much weight ... so much extra fuel and water must be large part of this weight?

I hope your "Diet Plan" works out.

Great trip!
Reply With Quote
  #5  
Old 9 Oct 2010
Registered Users
New on the HUBB
 
Join Date: Oct 2010
Location: Sydney
Posts: 1
690E Woes as well

Hi team... heres some other things to watch out for... I now have 15,000 k's on mine.
1. I have had 3 new speedos replaced the last being from the 690 SMC which seems have fixed the issue of the display blowing.. (not fogging).
2. Oxygen sensor (1 long & 3 short flashes) due to a broken wire, but now doing it with no wiring issue.. (I just live with it)
3. I snapped a chain at around 8k and it broke the slave cylinder and crack the engine casing... this was replaced under insurance claim. I now have a ktm hard part that covers the chain and protects the slave unit.
4. When the chain snapped it also destroyed the chain guides but more of a worry the chain bound and cracked the swing arm (also under Insurance claim)
5. I have tried the dunlop d908's front and rear.. you have to give these at least 300km run in as I had major wobbles at 90km an hour,,, now I get up to 170 with no issue (rear spocket changed to get these speeds). I have now tried the IRC tractionator on the rear and within 1 ride it was a throw away.. all the centre knobs (well every second) completly ripped off.
6. i have had three sets of mirrors (all original) replaced as they snapped at the stem were the screw into the main handle bar bracket. (they just vibrated and not due to any off's)
7. The rear fender that holds the license plate snapped off.. Other riders behind me always commented that it just flapped in the wind.. I took the extension off and simply redrilled the blinkers and license plate to the top section. Very sturdy now.
All in all I love this bike.... apart from the low range tank which Safari has a long range version.. but I get great mileage anyway.
I also purchased the lowering link from Koubalink which dropped it about 40mm.. Im only 167cm so it has helped alot. I have yet to bottom it out and I have had some mad rides that Im sure would have done this.
Oh by the way if you do get a new speedo check the wheel diameter as mine was out and I was doing 14km quicker than the speedo showed... I had to remove one of the wires in the speedo connector so it unlocked the display for me to change the wheel size.
Well thats all from me... happy KTMming
Reply With Quote
  #6  
Old 9 Oct 2010
Gold Member
New on the HUBB
 
Join Date: Mar 2010
Location: Slovenia
Posts: 10
My mirror (just one) snapped at the stem too. I order The Double Take Mirror (Build Your Mirror - Double Take Mirror - Build Your Mirror - adventure-spec.com: Off-Road Adventure Motorcycling gear,UK,enduro,rally,rallye,touring,rtw,mx), hope it will work better. About the license plate fender - I affixed the fender to the pannier rack with plastic tie.
Reply With Quote
  #7  
Old 29 Oct 2010
Registered Users
HUBB regular
 
Join Date: Sep 2004
Location: Port Harcourt, RS, Nigeria
Posts: 89
matjaz

Thanks for posting, nice pics on your picasa album

I plan to do either Nigeria to Europe via Algeria in April 2011 or go across from Nigeria to East Africa

My GS is retired and am looking at getting a 690E December 2010 and start preparing it.
__________________
inyang

Port Harcourt, Nigeria
Reply With Quote
  #8  
Old 30 Oct 2010
colebatch's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Nov 2004
Location: London / Moscow
Posts: 1,913
further issues to consider, and remedy

i know a bunch of guys who have put quite a few miles on the 690 ... you may want to consider the fuel filter too.

The fuel filter appears to be an inappropriate part. It looks like its from a carburetored engine and is not fine enough for a fuel injected engine. Injectors have clogged several times in my company. A fix is to fit a proper metal cartridge FI filter inbetween the pump and the injector:



Last edited by colebatch; 13 Sep 2013 at 15:26.
Reply With Quote
  #9  
Old 30 Oct 2010
Registered Users
HUBB regular
 
Join Date: Sep 2004
Location: Port Harcourt, RS, Nigeria
Posts: 89
Thanks Colebatch,
I see your comments over at ADV also.

So much to do (to the bike), and so little time (and money!)

I have a growing list of mods to do out of the box to the bike, I guess my 1st quarter 2011 is going to be interesting
__________________
inyang

Port Harcourt, Nigeria
Reply With Quote
  #10  
Old 12 Nov 2010
Registered Users
New on the HUBB
 
Join Date: Nov 2010
Location: Chile
Posts: 1
Quote:
I also purchased the lowering link from Koubalink which dropped it about 40mm.. Im only 167cm so it has helped alot. I have yet to bottom it out and I have had some mad rides that Im sure would have done this.
What Koubalink did you purchased? The 1" or the 1"5/8? Did you have some problems like the rear wheel bottoming with fuel tank? Did you note some differences in suspension behavior? Some other issues? The side stand still works without standing the bike horizontally due to lower height?

Thanks for your answer
Reply With Quote
  #11  
Old 23 May 2011
Gold Member
New on the HUBB
 
Join Date: Mar 2010
Location: Slovenia
Posts: 10
more ktm 690E problems

On my last trip to egypt radiator broke. Week point was where front radiator protection is fixed to radiator. Definitely mayor construction nonsense on 690E. You can not protect block of light and soft aluminum by screwing protection on that fragile block. But it turns out that solution was quite simple and cheep. It cost me less than 5 euro, as guys in the garage made extensions for free.





Front protection is now little bit further from radiator, so I tilted front fender with 4 washers on 2 screws that holds front fender.



Side panels I fixed with regular rubber bumper designed for protecting doors and plastic tie. For the moment I considered this as temporary solution but now I think wit stronger tie it will be permanent.



For some reason pictures does not work. Here is link to picasa album:

Picasa Web Albums - matjaz prosen - Recently Updated
Reply With Quote
  #12  
Old 24 May 2011
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
Can't see your pics but I think you're referring to a well known issue that is easily resolved by replacing the stock bolts with either a cable tie around the top rad mount or using the soft plastic 6mm number plates screws we have in the UK.

Other issues include the easily bent brake pedal and both upper & lower tank mounts, Rally-Raid provide a solution for all of them. The rear master cylinder is vulnerable, I had an extension welded to my bashplate to protect it.
__________________
My photos: www.possu.smugmug.com
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mondo Enduro John Ferris Motorcycle Events around the world 0 9 Dec 2007 03:19
Enduro India forestry West and South Asia 1 28 Oct 2007 13:12

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 11:14.