Thanks, I had this Allen key for a few years now and it served me well, don't know the make or origin of it :oops2:

I bought a new one from the best tool making company in Slovenia (Unior). I will do my best to get the bolts out before I have to use an open flame on the bike with a full gas tank :smile3:

Well it took me long enought to get this thing done. SO finaly I have mounted Renthal Dakar High bars to my KLE. The bike put up a fight, but in the end I managed to get it sorted (almost:innocent:).

1. Old bars comming off:
http://shrani.si/t/u/gh/3zjQmkae/img3555.jpg

2. Bars side by side (more one over the other )
http://shrani.si/t/d/n9/1wcskaH3/img3556.jpg

3. Test fit to mark where the hole for throttle controls will be drilled
http://shrani.si/t/2U/ZB/4xWZcxS0/img3558.jpg

4. 5mm hole drilled, though Renthal does't suggest drilling
http://shrani.si/t/40/oY/4GTFVAAt/img3561.jpg

5. Almost done. I need to buy 2 bolts for handguards (don't know why the pic is so blury, will post a beeter one in the comming days)
http://shrani.si/t/1Y/1O/4ktXvIK7/img3563.jpg

Word of warning for all who want to use Renthal grips, they are a bit to short for throttle side:thumbdown::
http://shrani.si/t/3q/QT/iLkOq1d/img3564.jpghttp://shrani.si/t/30/rQ/ge9JF0K/img3566.jpg

Stock cables are long enough, but need a bit of rerouting to prevent binding. I did a few laps in front of the garage and it feels great:funmeteryes:, but will have to wait a while for proper test as ther is still snow outside. More pictures to follow as sonn as I get those 2 bolts I am missing.