Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Kawasaki Tech
Kawasaki Tech Kawasaki Tech Forum - For Questions specific and of interest to Kawasaki riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 28 Apr 2013
Registered Users
HUBB regular
 
Join Date: Apr 2010
Location: australia
Posts: 25
New to me kle500

In 2007 I bought a new V-Strom 650 and not long after a mate bought a new KLE500 which I always thought to be a good little bike. He has travelled many 1000's of KMS, north past Cains and south to South Aust. all loaded up with camping gear and he never travels lite.
I have just a week or so ago bought a 2007 model that is in good condition with only 26000kms on the clock. I have added new Dunlop 605's front and rear, changed the oil and will soon change the air filter, brake fluid and engine coolant.
Thats all for the moment, I'll wait till I have more miles with it and then decide. I may add a beak just for the look and perhaps at a later date, a re-spray. I'm not fond of the gold frame and the blue tank and panels could do with a change too.
For now I like this bike, I think the usually poor write ups were more of an indication of the bike journalist's preduce than an objective valuation. I think the bike fits the design brief rather well.

Southern Cross
Reply With Quote
  #2  
Old 28 Apr 2013
Registered Users
Veteran HUBBer
 
Join Date: Sep 2011
Location: Slovenia
Posts: 104


Hope you will like it as much as the rest of us do and to the club
__________________
->Honda XL125V Varadero '08 sold
->Kawasaki KLE 500 '05 riding it, like I stole it
Reply With Quote
  #3  
Old 30 Apr 2013
Registered Users
HUBB regular
 
Join Date: Jan 2012
Location: Windsor [near enough] NSW Aus.
Posts: 33
Talking

I've got a photo of SC's new KLE, taken on the day of the test ride.

You can't see much of it though because it is squeezed in between my KLE and his Strom in a single parking space.

It is a nice bike to ride and runs well.

I'm a bit ticked off with SC though he bought his for about $200 more than I paid for my old '94 and his has only half the mileage that mine does


Like SC, I had to replace tyres and pay 12 months rego.

SC, that's a buy, well done.

When I get a free day/weekend we will do a day/overnight run somewhere, preferably with a nice mix of winding tar and easy dirt.

Maybe a re-run of the Crookwell ride you planned for the group and then weren't well enough to come along with us all.


Ock.
Reply With Quote
  #4  
Old 3 May 2013
Registered Users
HUBB regular
 
Join Date: Apr 2010
Location: australia
Posts: 25
My KLE

As with all my bikes, it's not long before I undress it ad see what it's made of. I don''t want to be first looking at the outside mechanicals by the side of the road if that should ever happen. (it hasn't yet in over 45 years of riding)
With the tank off, my first job I notice will be to lengthen both the fuel lines by just 30mm, so as in future the replacing of the tank will be just a few minutes job.
I removed the filter which is the original OEM type and found it to be only mildly dirty so after a good wash in petrol I dried it thoroughly and gave the outside of it a light spray of sticky chain oil to help aid the cleaning of air.
This air box has the smaller snorkel so I thought I should experiment by removing it and fashioned an ' awning' over the top edge in thin sheet metal, to help prevent water from entering. I thought this mod may not be helpful in breathing at higher revs, but as it was out of the bike and in my hands, I thought 'well give it a go' it's easy to reverse if needed. Well it was needed, the bike was sick and didn't want to pull at all. So back to standard again.
When next I'm at the electrical shop I'll buy a can of special electrical spray and give all the multipin plugs a healthy spray as they don't look to be long term reliable. They all show the begining of corrosion and I don't need electrical problems. Speaking of the bike's electrics, the battery died on the second day I owned it and lucky for me it was in the garage at the time and I had a spare battery in hand that fitted. Luck
The only other two things I want to alter,are the screen which is rubbish, and the seat which places me too far forward, up against the tank. This makes the sitting position too cramped. I think I will buy a seat from the French company "top Sellerie" who make a wonderful line of seats to fit dozens of models from all manufactures. Oh I do like the standing position. I have some 25mm (1 inch) bar risers which should make it all just about perfect.
All for now.
Cheers
Southern Cross
Reply With Quote
  #5  
Old 6 May 2013
Registered Users
HUBB regular
 
Join Date: Apr 2010
Location: australia
Posts: 25
A little more progress in the last few days. I rode down to the large hardware store and bought a small sheet of galvanised sheet 600X500mm X .8 thick. This is to make up a template for my new screen, the OEM is plain silly of Kawasaki.
With the OEM screen now in the rubbish bin and the little bracket put aside in case I may use it or part of it I marked out the position of the two threaded bolts and drilled out two 5/16" holes and started a third hole above the headlights in the center. Getting a washer and nut over and started on the third bolt took a lot of time and some blue words. Finally as the space for my hand was very tight I resorted to a trick I'd used years before and I stuck the washer and nut to my longest finger with double sided tape. I now held the sheet in the correct position with the three bolts and nuts. Now I sketched out the screen with a texta- colour pen, swinging the bars both left and right. The screen outline looked a lot like the classical female hourglass figure, hmmm, nice. Although the screen is quite high, I'll have to also fit an aerofoil piece across the top 3" to shoot the air higher to clear my helmet.
The top edge looks very dangerous ATM but I'll pick up the lexan tomorrow and will install it asap.
The seat now wears the lambswool cover from my V-Strom and surprisingly doesn't need any trimming. I have stuffed some scrap foam rubber between the seat and the lambswool and this will be permanent when I do some shaping on a new piece of foamrubber.
Now I'll look for an improved exhaust system and that will be all in the short term. The seat is greatly improved by this simple and cheap alteration and for the next few months I just want to ride over this magical country I call home.
Reply With Quote
  #6  
Old 12 May 2013
Registered Users
HUBB regular
 
Join Date: Apr 2010
Location: australia
Posts: 25
In two days time I'm planning a 860 km round trip through central NSW staying 2 nights at Temora. The weather does not look too good, cloudy, some showers with temps ranging from -2 to 14 degrees centigrade. It's a few months now since I've been on a long ride so I'm almost desperate to get away.
I have not as yet made up the Polycarbonate screen as the sheets at the local hardwood store are only Acrylic and is not suitable. I have altered the sheet metal template, adding a turned up lip at the top which I hope will direct the airflow above my helmet. This hopefully will be a lot quieter than with an air blast on the helmet.
I have this week installed heated grip pads ( $57 from Ballards ) and will tomorrow finish the electrical connection to the battery via a high/low temp.switch and an external keyed switch. This way does not connect to the ignition wiring as the bike loom I believe is minimal in wire size and I don't want any possible meltdown issues when switched to high. The external keyed switch is to remind me to switch the grips off. The ignition switch and the keyed switch have keys on the same lanyard to remind me to switch off.
I'm looking forward to a long ride but not so keen on the expected weather.

Southern Cross
Reply With Quote
  #7  
Old 12 May 2013
Registered Users
HUBB regular
 
Join Date: Jan 2012
Location: Windsor [near enough] NSW Aus.
Posts: 33
Quote:
Originally Posted by Southern Cross View Post
In two days time I'm planning a 860 km round trip through central NSW staying 2 nights at Temora. The weather does not look too good, cloudy, some showers with temps ranging from -2 to 14 degrees centigrade. It's a few months now since I've been on a long ride so I'm almost desperate to get away.
I have not as yet made up the Polycarbonate screen as the sheets at the local hardwood store are only Acrylic and is not suitable. I have altered the sheet metal template, adding a turned up lip at the top which I hope will direct the airflow above my helmet. This hopefully will be a lot quieter than with an air blast on the helmet.
I have this week installed heated grip pads ( $57 from Ballards ) and will tomorrow finish the electrical connection to the battery via a high/low temp.switch and an external keyed switch. This way does not connect to the ignition wiring as the bike loom I believe is minimal in wire size and I don't want any possible meltdown issues when switched to high. The external keyed switch is to remind me to switch the grips off. The ignition switch and the keyed switch have keys on the same lanyard to remind me to switch off.
I'm looking forward to a long ride but not so keen on the expected weather.

Southern Cross

Sorry I can't tag along for this one SC.

Pity you couldn't have hooked up with Chops and the others for the ride they are doing [started today, I was working so couldn't even ride just for today with them].

There are a couple of perspex places close to where I work, if you know exactly what it is you want and the size let me know and I will pick up a piece for you.

PM me over on ST though as I check in there more often than here.
Reply With Quote
  #8  
Old 14 May 2013
Registered Users
HUBB regular
 
Join Date: Apr 2010
Location: australia
Posts: 25
Thanks for picking up the Perspex Ock, I,ll work out how to heat and bend to shape.
I cancelled my trip with the others going to Temora. Long time health issues makes it too painful ATM.
I'll spend the time finishing the heated grips and install the Stebel Nautalis air horn that never made it on the V Strom.

S.C.
Reply With Quote
  #9  
Old 14 May 2013
Registered Users
HUBB regular
 
Join Date: Jan 2012
Location: Windsor [near enough] NSW Aus.
Posts: 33
You are welcome re the perspex SC.

B' is in hospital tonight, she had a bit of a turn on her way to work this morning.
They thought might be a mild heart attack but tests show it wasn't.
Yet another of the ongoing mysteries with her health at the moment.

She should be home tomorrow.

Ock.
Reply With Quote
  #10  
Old 15 May 2013
Registered Users
HUBB regular
 
Join Date: Apr 2010
Location: australia
Posts: 25
Best wishes to Lady B, she is going thru a difficult time. I'm a little annoyed with myself for missing the Temora ride but with these low temperatures I'd end up in strife. For that reason I'm pleased to be home and warm.

S.C.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
KLR650 KLE500 interchangeable parts Austinmation Kawasaki Tech 1 25 Feb 2013 14:11
kle500 missfire @ <4500 rpm Joe C90 Kawasaki Tech 2 24 Oct 2012 20:52
Help identifying KLE500 swingarm Vracktal Kawasaki Tech 0 27 Aug 2012 11:11
KLE500 A3 Front sprocket issue... Orlow Kawasaki Tech 2 14 Aug 2012 21:44

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 23:00.