Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Kawasaki Tech
Kawasaki Tech Kawasaki Tech Forum - For Questions specific and of interest to Kawasaki riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 3 Sep 2008
TREKGS's Avatar
Registered Users
New on the HUBB
 
Join Date: Aug 2008
Location: CYPRUS
Posts: 19
Mods/kle Of Road Handling

I have seen a lot of threads about modifications on KLE500.Im especially interesting to modify kle for better
Handling off road. As an example I would like to modify for 60%off road and 40% on road commuting etc.I believe
That kle it’s a good base for a project using a small budget.

Here below it’s my wish list and thinks I already did. I m just trying to summarize and also read your opinion.

1.Handle bars .Ihave installed lower lighter handle bars as I didn’t feel comfortable with stock handle bars .I always had the impression that
Bike it’s over steering .Also this bars will transfer more weight on front wheel and improve grip for road use as well.

2.Acerbis hand protectors. Much better protection than stock. Already installed.

3. Progressive springs front and rear, or much better and more expensive if rear shock will be replaced to something better .With progressive
Springs bike will be comfortable for road use but unexpected bottoming will be prevented off road. Font suspension can take up to 36psi pressure and from what I have seen It can really work from 20-30psi according to riding conditions.

4. Replace front mudguard to after marked (enduro). Done

5. Front sprocket changed to 16 t. Not much improvement but enough for a good balance on/of-road use. Done.

6. After market lighter exhaust system (arrow etc) .Less weight on the bike and more power in combination with a K&n or Dna filter.

7.On-off tyres with better grip of road i.e. PIRELLI MT21.DONE

8.Brake lines. Not something expensive but at least pressure from brake pump will be transferred
To the calliper without loses on the cheap rubber stock brake line.

9. Front and rear brake disk.Change to better quality in combination with compatible usually same brand brake pads. This improve the brakes of-road without changing callipers etc.Its th cheaper solution.

10. Engine guard .Done.

Definitely kle is not a ktm or an of-road beast but for sure is a convenient bike capable of cross country use as long as someone will
Do the right modifications within a logical budget and to ride close to the bikes limits.

Any suggestions or opinions?

Cheers
George
__________________

Last edited by TREKGS; 11 Sep 2008 at 14:55.
Reply With Quote
  #2  
Old 3 Sep 2008
Registered Users
HUBB regular
 
Join Date: Aug 2008
Location: UK
Posts: 20
Got some pitcures you could pop up?

All sounds pretty good so far!
Reply With Quote
  #3  
Old 3 Sep 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2008
Location: England
Posts: 152
where did you find out the forks could take 36 psi? Might help mines excessive dive when braking
Reply With Quote
  #4  
Old 4 Sep 2008
TREKGS's Avatar
Registered Users
New on the HUBB
 
Join Date: Aug 2008
Location: CYPRUS
Posts: 19
Quote:
Originally Posted by ShaunJ View Post
where did you find out the forks could take 36 psi? Might help mines excessive dive when braking
There is a label on the right hand site of fork and is clearly indicated 36 psi maximum pressure.I have tried different pressures and found that you can use 20psi for city-commuting and when off-road i use 28psi.THe air chamber in the forks is small,if you try to put with hand airpump 28psi it will be impossible.Maximum i got with hand pump was 18psi so better use very carefully a small 12V comressor.

keep in mind that if you have a top box you will have a lot of vibrations on the bike after 120km with 28psi.I had this vibrations i have removed the top box and problem solved.Anyway 20psi is very good with top box and not much diving when braking .
__________________
Reply With Quote
  #5  
Old 4 Sep 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2008
Location: England
Posts: 152
thanks
just had a look and it says 35psi so probably take it upto 22psi at the weekend that and my new ebc disk and double H pads should solve all the brake issues
Reply With Quote
  #6  
Old 4 Sep 2008
royzx7r's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Mar 2007
Location: Liverpool UK
Posts: 225
Let us know how you get on?.

I put 0.5bar in mine the other day but was reluctant to add more...will be very interested to see how it affects the bike.



cheers
roy
__________________
"Whats in that thing??", An R1 owner said.
Reply With Quote
  #7  
Old 4 Sep 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2008
Location: England
Posts: 152
wil do

i already run with 12 psi which stops the wallowing round corners but it still dives excessively maybe its because i'm not a lightweight which is also why i think all modern bikes should have some sort of front and rear preload adjustment even if its oldschool like this as how many riders are going to be same weight as the test/setup rider.
Reply With Quote
  #8  
Old 5 Sep 2008
TREKGS's Avatar
Registered Users
New on the HUBB
 
Join Date: Aug 2008
Location: CYPRUS
Posts: 19
Folks,

Thinks are not so complicated.Maximum pressure is 36psi and i personally believe pressure is far from what the forks can take,acctually is a policy to have the settings in a safe position away from limits.I have tried the forks and they can take easily up to 28psi and i have tried this presure in rough country roads same used for wrc in Cyprus .No leakages ,no problems will occure as long as forks are in good shape.
__________________
Reply With Quote
  #9  
Old 7 Sep 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2008
Location: England
Posts: 152
hi
changed the pads and put 20psi in forks yesterday and swapped the disk this morning and what a difference even with the brakes not fully bedded in and on a wet road i can stop in a shorter distance than with the old pads and disk (using same pressure on lever and using same braking points on road) also the bike handles alot better with 20 psi the front ends alot more precise and confidence inspiring
Reply With Quote
  #10  
Old 7 Sep 2008
TREKGS's Avatar
Registered Users
New on the HUBB
 
Join Date: Aug 2008
Location: CYPRUS
Posts: 19
Quote:
Originally Posted by ShaunJ View Post
hi
changed the pads and put 20psi in forks yesterday and swapped the disk this morning and what a difference even with the brakes not fully bedded in and on a wet road i can stop in a shorter distance than with the old pads and disk (using same pressure on lever and using same braking points on road) also the bike handles alot better with 20 psi the front ends alot more precise and confidence inspiring
Shaunj,


Good news.

cheers
george
__________________
Reply With Quote
  #11  
Old 10 Sep 2008
royzx7r's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Mar 2007
Location: Liverpool UK
Posts: 225
Right then, theres been a lot said over air in the forks. I put 10psi in mine this morning and headed into north Wales.

Had the roads all to my self, hehe!!!

With 10psi, the forks were a whole lot better then before, not much dive unless you gun the brake. I was very impressed with the difference it made to the ride of the bike. The bike was more sure footed in turn in and also the mini tank slapper I would get at 90-95mph was now gone.

The bike has a sticker on the forks with a maximum psi of 35. Im a bit reluctant to goto that sort of pressure but I think 10-20psi should improve your ride a whole lot. Im gonna try 15psi in mine the next time I go out on it and I think that should hit the mark.

Regards
Roy


__________________
"Whats in that thing??", An R1 owner said.

Last edited by royzx7r; 10 Sep 2008 at 18:55.
Reply With Quote
  #12  
Old 10 Sep 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2008
Location: England
Posts: 152
Roy
have u got a fender extender on the front?
if so who makes it?

Also as a guide i weigh about 95kg and 20 psi gives optimal handling i find
Reply With Quote
  #13  
Old 10 Sep 2008
royzx7r's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Mar 2007
Location: Liverpool UK
Posts: 225
There is no listed fender extender for the kle500.

My mate gave me one( I think it was from a zzr600) and I just made it fit. Its not perfect looking but does the job well.

Im sure you could make any fit with a bit of tinkering.

I have a jack up kit fitted which has sharpened the handling up noend and Ive just got to fit my stainless brake lines to compliment the ebc discs and pads and then im sorted.


regards
Roy
__________________
"Whats in that thing??", An R1 owner said.
Reply With Quote
  #14  
Old 10 Sep 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2008
Location: England
Posts: 152
ok thanks
i was thinking of doing that but no shops have them on display so u can't see which would be the best fit
Reply With Quote
  #15  
Old 10 Sep 2008
Registered Users
HUBB regular
 
Join Date: Aug 2008
Location: UK
Posts: 20
Nice looking ride...in the best colour

Are those Avon tyres?

EDIT: Sorry just looked a bit closer...

Last edited by Ruud; 10 Sep 2008 at 21:06. Reason: Poor eye sight!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
TS185 / RMX250 handling??? jjjune Equipment Reviews 0 5 Aug 2008 17:32
KLR 650 Suspension and bad handling MichelleS Kawasaki Tech 6 15 May 2007 17:40
Handling Agents in Buenos Aires nikb Trip Transport 3 19 Sep 2005 17:46
port handling charges/uk futronix Trip Paperwork 2 18 Feb 2004 22:27
XT 3AJ - off road handling?? benaus Yamaha Tech 3 19 Jun 2003 21:10

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 14:05.