Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Kawasaki Tech
Kawasaki Tech Kawasaki Tech Forum - For Questions specific and of interest to Kawasaki riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 22 Mar 2010
Registered Users
HUBB regular
 
Join Date: Oct 2005
Location: Alta Loma, California, U.S.A.
Posts: 37
Angry Dropped KLR and broke off the bleeding plug...

I dropped my KLR and broke off the plug for the rear brake cylinder. I changed the bake pads and was able to breed the line somehow for the brake to feel tight. The problem is that I tried to remove the plug with an extractor and the extractor bit broke inside :-(. The brake works great with the new pads and I do not see any leaks, should I be concern?! Going on a Mexico trip for 3 weeks this comming wk.

Thanx for any advice,

Greg
Reply With Quote
  #2  
Old 22 Mar 2010
Super Moderator
Veteran HUBBer
 
Join Date: Jul 2007
Location: Bellingham, WA, USA
Posts: 3,898
"Plug".....?

Whatever you mean by that, it's not out of the question that you order a protector for that rear master cylinder: overpriced, but easily installed and removed with two bolts. Worse things can happen than a broken "plug." I've forgotten who makes them, but I'm sure you can turn one up, or just make something yourself.

I've never found a way to remove a broken easy-out; far better not to break them in the first place. A friend once used a cutting torch to remove one from an engine block, then welded in a chunk of scrap iron, then drilled and tapped it. Sounded torturous to me. They're extremely hard, therefore brittle and can't be drilled. If pliers, heat and other obvious methods fail, I'd just replace the cylinder at my leisure.

Hope that helps.

Mark

edit to add: Oh, you mean the wheel cylinder, not the master cylinder? That makes more sense. Never mind any of the above.
Reply With Quote
  #3  
Old 22 Mar 2010
Mickey D's Avatar
Moderated Users
Veteran HUBBer
 
Join Date: Jan 2010
Location: California
Posts: 501
Greg,
This is a tricky one. But it sounds like your bike is good to go if the brake is working, not dragging and not leaking fluid. So I think you're fine for your Mexico trip. Worry about fixing things when you get back. Rear pads should last 10,000 miles or so. I would do some riding and using the rear brake to make sure all is OK. No leaks? Good to go.

A good machinist can probably extract the old broken Easy Out. Or maybe you can do it without destroying the caliper? Be careful. Most time, tapping the Easy Out will loosen it and it will fall out and be able to be pulled out.

Once you remove the broken easy out, this is what I would do:
First, soak the broken bleed bolt with WD40 or Penetrating oil and let sit over night.

Buy or borrow a SNAP-0N (or other HIGH QUALITY) Extractor to pull out the stuck bolt. Good technique in the use of this tool makes all the difference. If you are not sure what you're doing, let a machinist do the job, or good mechanic. Experience counts on this one.

You risk destroying the Caliper, but no big deal, lots of used ones on Ebay for cheap if you need another.

Bleed bolts are notoriously brittle and kind of get corroded and welded in place. That is why it broke. You need to bled your brakes more! Twice a year is good! Moto brake fluid absorbs moisture and becomes ineffective.
Change twice a year! Better braking, less fade!

Good luck, just take it easy and slow. Think about what you're doing.
Reply With Quote
  #4  
Old 22 Mar 2010
MikeS's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Nov 2005
Posts: 1,187
I once had a seized bleed nipple on an older bike which sheared off...I got a metalwork shop to drill it out, rethread the calliper and put in a larger diameter bleed nipple. Worked fine. The alternative is just to replace the calliper, should be plenty about in the US.
__________________
Mike


www.singapore-scotland.blogspot.com
www.argentina-alaska.blogspot.com
My little Vid: India/Pakistan

BMW R1150GS
Suzuki DR650 SE: Ride it like ya stole it. Oh, somebody just did...
Reply With Quote
  #5  
Old 23 Mar 2010
Registered Users
HUBB regular
 
Join Date: Oct 2007
Location: Sydney - Australia
Posts: 39
If all else fails, spark erosion may be the only way to remove a hardened easy-out. Probably more cost effective just to try and buy a used one from the wreckers?
Reply With Quote
  #6  
Old 23 Mar 2010
Registered Users
Veteran HUBBer
 
Join Date: Jul 2003
Location: Mimbres, New Mexico, USA
Posts: 510
Never done it on a bike, but as someone who grew up driving rusty old cars in Wisconsin, I've had bleeder screws break on car wheel cylinders, and I was always able to bleed the brakes by loosening the banjo fitting where the brake line attaches well enough to get a decent pedal. Not saying you shouldn't fix it properly, but it will work in a pinch.
Reply With Quote
  #7  
Old 24 Mar 2010
Bigfoot's Avatar
Gold Member
HUBB regular
 
Join Date: May 2007
Location: Perth, Western Australia
Posts: 85
Broken Bleed V/v

Pay to have the broken nipple removed or replace the caliper before any big trip. Better to deal with it at home then on the side of the road.

I just received a pair of speed bleeders from Arrowhead Motor sports. They have a small ball v/v machined into them which will make bleeding the system much easier for one person.
Attached Images
 
__________________

That's not an oil leak.....the old girl is just marking her territory.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear brake bleeding problem, ? bradley j Yamaha Tech 21 25 May 2009 23:39
Posts Per Page Seem Broke crturboguy Website Feedback 2 3 Jul 2007 13:46
help... motor broke down in sahara jelvis North Africa 6 13 Feb 2006 18:08
Bleeding brakes (1150 GS ABS) NorCal BMW Tech 4 15 Dec 2004 15:57
bleeding oil martync Yamaha Tech 5 28 Oct 2003 22:06

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 12:02.