Horizons Unlimited - The HUBB

Horizons Unlimited - The HUBB (http://www.horizonsunlimited.com/hubb/)
-   Kawasaki (http://www.horizonsunlimited.com/hubb/kawasaki/)
-   -   KLE 500 handguard protector replacement (http://www.horizonsunlimited.com/hubb/kawasaki/kle-500-handguard-protector-replacement-35826)

Franconian 10 Jun 2008 13:50

KLE 500 handguard protector replacement
 
Hi folks,

Has anyone fitted another (proper) handguard protectors to the KLE?

If yes which ones do fit?

Thanks,

Frank

henryuk 11 Jun 2008 00:33

have you tried the Acerbis Rallyguard or Brush guard (the former has an alloy insert which is worth the extra if you are planning on crashing)? They fit pretty much everything. If they dont fit you could always get some renthal bars.

royzx7r 11 Jun 2008 10:43

I think the bars are a problem on the KLE with regard to fitting new handguards. Some people tend to fit renthal bars to cure this.

Ash & Deb on this site fitted a set if I remember right, to the standard bars but was a big job.

Check some of the older links for more on this.


Roy:thumbup1:

Franconian 16 Jun 2008 09:53

Thanks for the info.

I will post it here when I found a solution.

Cheers,

Frank

poppykle 17 Jun 2008 11:31

http://www.horizonsunlimited.com/hub...462#post162354

This is the link for Ash & Deb's post

Jameseye 30 Jun 2008 10:58

Quote:

Originally Posted by royzx7r (Post 193908)
I think the bars are a problem on the KLE with regard to fitting new handguards. Some people tend to fit renthal bars to cure this.

Ash & Deb on this site fitted a set if I remember right, to the standard bars but was a big job.

Check some of the older links for more on this.


Roy:thumbup1:


Not really a problem - the cheap chinese alloy-under-plastic jobbies (in imitation kevlar matt!) The trick is using a small dremel-type tool on the standard bar ends to knock the plugs out... too easy!

Cheers
Ian:mchappy:


All times are GMT +1. The time now is 13:39.


vB.Sponsors