Horizons Unlimited - The HUBB

Horizons Unlimited - The HUBB (http://www.horizonsunlimited.com/hubb/)
-   Kawasaki (http://www.horizonsunlimited.com/hubb/kawasaki/)
-   -   cylinder bore spec f7 (http://www.horizonsunlimited.com/hubb/kawasaki/cylinder-bore-spec-f7-26146)

micshol 15 Mar 2007 10:31

cylinder bore spec f7
 
i'm trying to figure out what the standard cylinder bore is on a 1973 kawasaki F7 175cc. I am going to buy a manual but I would like to drop the jug off at the shop and they claim they don't have in resources to figure it out. Any help would be much appreciated. Thank you.

lecap 15 Mar 2007 15:30

Do you want to get it rebored?
Get the new piston first and let the engineering workshop bore the barrel to fit your specific piston.
If you only want to determine size and eventual wear get them to measure the piston and barrel in relation to each other. Clearances are pretty much standard and depend only on diameter and material of barrel (cast iron or aluminium coated)
If you measure yourself note that only barrels are supposed to be cylinder shaped. Pistons are often tapered and oval as they are machined at or near operating temperature whilst you measure at room temperature.


All times are GMT +1. The time now is 21:15.


vB.Sponsors