Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Kawasaki Tech
Kawasaki Tech Kawasaki Tech Forum - For Questions specific and of interest to Kawasaki riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 26 Oct 2008
Registered Users
HUBB regular
 
Join Date: Jul 2008
Location: Brisbane Aussie
Posts: 32
Lifting 07 KLE 500?

Need help!
Q1: How do I raise the rear end of my KLE 500? I notice the top of the shock has different positions and mine is in the lowest.
Q2: Do i need any special tools? I've got plenty of tools but have never worked on bikes before.
Q3: Is it safe to put air in the front forks to stiffen it up or will it contaminate the oil? Am I better just getting progressive springs and heavier oil? (just heard some fairly mixed reports!)
I'm only a feather weight (75kg but 6'3" tall) The bike sits low so I wouldn't mind it sitting a bit higher and not dive under braking. Am I asking too much:confused1:
__________________
Fun begins when the bitumin ends!

Last edited by Keater; 26 Oct 2008 at 09:48.
Reply With Quote
  #2  
Old 26 Oct 2008
Registered Users
HUBB regular
 
Join Date: Apr 2008
Posts: 46
I run mine with 15psi in the forks which helps with dive,search the forum im sure this has been coverd before mate,i think 35psi is possible but dont quote me on that. As for the tail end riser kits are available on ebay,just replace the parts on away you go,again its already been coverd here. The top mounting points look as though you can mount the shock in the other positions but in reality you would need to move have a set of spacers made up.
__________________
http://ranfog.co.uk
Reply With Quote
  #3  
Old 26 Oct 2008
Registered Users
HUBB regular
 
Join Date: Jul 2008
Location: Brisbane Aussie
Posts: 32
Cheers. I know that there is info similar regarding the front forks, but not answering my questions! My manual says DO NOT ADD AIR. I've read that some have and there has been good results but will it cause failure earlier? Also how do I adjust the rear as it has variable positioning in the top. how do I turn the Nut to adjust. I'd rather work with what is on it than buy s#^t I may not need! Any help to answer my questions would be much appreciated.
__________________
Fun begins when the bitumin ends!
Reply With Quote
  #4  
Old 26 Oct 2008
Registered Users
HUBB regular
 
Join Date: Jun 2008
Location: NSW, Australia
Posts: 62
Keater,

The nut at the top adjusts preload on the spring. By turning the nut so that the spring is compressed further, there is no difference in static height of the bike, but you will notice less sag when you sit on the bike and a stiffer ride. The KLE (from memory) is set for a 66kg rider for Aus delivery. If you bump it up to the third or fourth setting it will probably give you a better ride sans luggage. If you are carrying additional weight then you may have to investigate a heavier rear spring. The "dog-bones" will raise the rear ride height, but will not increase the suspension travel.

The nut is adjusted with a special spanner (the local bike shop will probably give you one as the always seem to have a number of these spare), but be warned, they are a bastage to get to and you will likely skin your knuckles in the process (I did - twice!)

Cheers
Ian

Last edited by Jameseye; 26 Oct 2008 at 12:57. Reason: add bits..
Reply With Quote
  #5  
Old 27 Oct 2008
Registered Users
HUBB regular
 
Join Date: Jul 2008
Location: Brisbane Aussie
Posts: 32
Spanner

Thanks for that I'll go and pester the bike shop for a spanner and give that a go. May consider dog bones later just want to mainly stop it sagging so much with me and the bag on the back (max 10 kg)
__________________
Fun begins when the bitumin ends!
Reply With Quote
  #6  
Old 27 Oct 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2008
Location: England
Posts: 152
Hi
A spanner should be included with the toolkit
remove right hand side panel with key should be tucked just under seat
Reply With Quote
  #7  
Old 28 Oct 2008
Registered Users
HUBB regular
 
Join Date: Jul 2008
Location: Brisbane Aussie
Posts: 32
Quote:
Originally Posted by ShaunJ View Post
Hi
A spanner should be included with the toolkit
remove right hand side panel with key should be tucked just under seat
I wish there was one but not in my kit I'm pretty sure I know what they look like. Similar to a 1/4 circle with handle and with 2 teeth on the inner edges that lock onto the nut. Am I right
__________________
Fun begins when the bitumin ends!
Reply With Quote
  #8  
Old 28 Oct 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2008
Location: England
Posts: 152
Quote:
Originally Posted by Keater View Post
I wish there was one but not in my kit I'm pretty sure I know what they look like. Similar to a 1/4 circle with handle and with 2 teeth on the inner edges that lock onto the nut. Am I right
Yeah thats what it looks like, odd there isn't one in the toolkit
Reply With Quote
  #9  
Old 3 Nov 2008
royzx7r's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Mar 2007
Location: Liverpool UK
Posts: 225
The KLE dont come with a tool to adjust the shocker.

I just used a flat head screw driver with a rag over it where it makes contact to the metal.

Give it a firm knock and it goes in no props, dont waste time on any other setting but hardest.

Getting a jack up kit made a good difference all round on mine.


cheers
Roy
__________________
"Whats in that thing??", An R1 owner said.
Reply With Quote
  #10  
Old 3 Nov 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2008
Location: England
Posts: 152
Quote:
Originally Posted by royzx7r View Post
The KLE dont come with a tool to adjust the shocker.
mine did unless the dealer put it in as an extra
Reply With Quote
  #11  
Old 3 Nov 2008
Registered Users
HUBB regular
 
Join Date: Aug 2008
Location: UK
Posts: 20
Lucky? Or have you got a newer model?

Either way do you need to jack the bike up or take the wheel off to adjust it? Or can it be done using side access?
Reply With Quote
  #12  
Old 3 Nov 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2008
Location: England
Posts: 152
its an 07

u can adjust it from the key removed side panel but if u do u may need to undo the rear master cylinder (so it can move slightly to the left) to get enough leverage depending on the spanner ( if u do undo the master cylinder make sure to reconnect the rear brake light switch link as it tends to unhook
Reply With Quote
  #13  
Old 4 Nov 2008
Registered Users
HUBB regular
 
Join Date: Jul 2008
Location: Brisbane Aussie
Posts: 32
cheers all for the help. Mine is the last of the 2007 model brought new and it didn't have the spanner I'll try whats said and go from there cheer again
__________________
Fun begins when the bitumin ends!
Reply With Quote
  #14  
Old 9 Nov 2008
Registered Users
HUBB regular
 
Join Date: Aug 2008
Location: UK
Posts: 20
Managed to adjust the shock yesterday quite easily using the 'screw driver and hammer' method - why didn't I do this sooner!?

Fitted some new Oxford hot grips as well - all in all about 2 hours work I guess?
Reply With Quote
  #15  
Old 7 Dec 2008
Registered Users
HUBB regular
 
Join Date: Jul 2008
Location: Brisbane Aussie
Posts: 32
Quote:
Originally Posted by Ruud View Post
Managed to adjust the shock yesterday quite easily using the 'screw driver and hammer' method - why didn't I do this sooner!?

Fitted some new Oxford hot grips as well - all in all about 2 hours work I guess?
x2 I gave the screwdriver/hammer a workout and it's much better! just need to sort the front out now
__________________
Fun begins when the bitumin ends!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Roof Tent/Lifting Roof ollieholden Equipping the Overland Vehicle 6 17 May 2002 19:07
lifting the front/rear Rocinante Yamaha Tech 2 30 Mar 2002 04:52

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 16:32.