Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Honda Tech
Honda Tech Honda Tech Forum - For Questions specific and of interest to Honda riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 7 Sep 2008
Registered Users
HUBB regular
 
Join Date: Sep 2008
Location: Spain for now...
Posts: 20
Mounting the engine on heavy-duty rubber to reduce vibrations?

I used to work on a sailing boat for a while, and I rememeber the old diesel engine it had was rubber-mounted to dampen the vibrations when it was running (something that I know a few cars have too), and I was wondering if anyone has ever considered/done anything similar to their bike? Would it even be possible? I realize that it'd probably mean modifying quite a bit to make it all fit and such, although in the case of my motorbike (a Honda Dominator), most of the mounts (that I've been able to see) are not directly onto the frame, but rather the engine is bolted onto pieces that in turn are bolted onto the frame.

IF it would be possible (even remotely), any thoughts on what material I could use to do this? Anything I would have to watch out for or take into consideration?

If this idea of mine is simply insane, feel free to say so... personally I do have the feeling I might be missing a few screws...

Nevertheless... if it worked it'd solve quite a few other lil' issues and problems, not to mention reduce at least some of the stress on the rest of the bike (lets face it, the big single isn't exactly "smooth")... not to mention my own rear end
__________________
"Hope for the best - plan for the worst. Then watch it all go pear-shaped and wing it." - Me

Have a nice trip.
Reply With Quote
  #2  
Old 7 Sep 2008
Registered Users
Veteran HUBBer
 
Join Date: Oct 2006
Location: Northumberland
Posts: 185
Your mad.
you don't want the engine to move in the frame as the drive to your rear wheel doesn't have a lot of lateral play in it.
Honda built the frame to cope with any stress the engine will put on the frame.
the rear engine mount and the swinging arm mount use the same fixing and would make the job too difficult.
normally the option left is to rubber mount the operator ie rubber mount the handlebars and the footpegs you shouldn't need the seat rubber mounting as you have a thick piece of foam between you and the bike (unless your foam in the seat has collapsed).
__________________
Home of the UK Coast 2 Coast off-road Challenge
www.C2CChallenge.co.uk www.4X4Safari.co.uk
Reply With Quote
  #3  
Old 7 Sep 2008
Registered Users
New on the HUBB
 
Join Date: Sep 2008
Location: 02474
Posts: 1
Some Buells and Harleys do this, it might be a starting point if you're looking for more info. Some kind of tie-rods are in place to keep the movement vertical-only, so the wheels don't lose alignment.

How you'd add this to a bike that wasn't designed for it though, no idea.
Reply With Quote
  #4  
Old 7 Sep 2008
Registered Users
New on the HUBB
 
Join Date: Sep 2008
Location: Los Angeles, CA, USA
Posts: 3
Rubber mounts

An alternative method for calming vibration can be seen on the newest Ducati Multistrada. The bike's handlebars are rubber mounted. This provides some isolation from vibration for the rider while allowing the engine to be rigidly mounted in the frame.
Reply With Quote
  #5  
Old 7 Sep 2008
Dodger's Avatar
Large Golden Member
Veteran HUBBer
 
Join Date: Aug 2005
Location: BC, Canada
Posts: 1,085
Isolastic

Norton did this with the Norton Commando back in the late sixties .
The engine , gearbox and swingarm were rubber mounted and consequently independant of the frame so the rider would not feel any vibrations .
It works .
But the whole bike was designed with this in mind .
To retro fit this onto another bike would be very difficult .
__________________
Blessed are the cracked, for they let in the light. - Spike Milligan
"When you come to a fork in the road ,take it ! When you come to a spoon in the road ,take that also ."
Reply With Quote
  #6  
Old 9 Sep 2008
Registered Users
HUBB regular
 
Join Date: Sep 2008
Location: Spain for now...
Posts: 20
Brainstorming...

ah well... I'd probably just have ended up with a "garage" full of a bunch of non-functional bike pieces if I'd tried anyways... and me standing beside it all with a face something like

hmmm... although perhaps... mount the "vertical" mounts (ie, where the screws are perpendicular to the ground) on rubber, and the horizontal ones... well, the rod thingy idea seems interesting... time to have another good look at how the engine is mounted to the frame...

Otherwise, perhaps... hmm... maybe if I can find my old book on materials science... see if there's something that could work. I knew I should've paid more attention in class...

Buggrit... I need to find a way to measure the various stresses on each mounting point. Or at least manage to make a rough guesstimate.

... ... ... ... ... ...

Somehow, I'm starting to get the feeling that 1. I'm using a bazooka to kill an ant and 2. I'm just gonna end up with a half-arsed system that will do nothing but screw everything up and break down all the time at best.

Perhaps I should try a gel pad and rubber mounting the handlebars first... and as far as luggage goes, rubber-mounting a rack should be much simpler than doing the same to the engine, although probably a lot less effective.

Anyone have any ideas for a more-or-less permanent solution to insulate luggage/equipment from vibrations? I mean aside from foam/gel wrapping it (which is, at best, temporary and would use up more space than I'm willing to sacrifice). Whacky/weird ideas welcome too
__________________
"Hope for the best - plan for the worst. Then watch it all go pear-shaped and wing it." - Me

Have a nice trip.
Reply With Quote
  #7  
Old 3 Nov 2008
Registered Users
Veteran HUBBer
 
Join Date: Apr 2003
Location: Cape Town, South Africa
Posts: 303
The Domi most probably uses its engine as something we engineers refer to as a stressed member. Lots of bikes do. Lots of other bikes don't and use either rigid or flexible engine mounts.

Rubber mounting a stressed member of the frame will sooner or later leave you with a cracked frame and perhaps with a couple of cracked bones too.

The reason why the boat's diesel was rubber mounted is it's got a crude chunk of cast iron as crankshaft web, is as heavy as the boat's anchor and lacks sophisticated features like balancer shafts which are abundant in your Domi engine.
The diesel would have vibrated the boat to the bottom of the ocean in no time would it not have been for the rubber mounts. Especially if you are talking fibreglass or wood for the "frame" with relatively thin and large sheets of aluminium or steel only being marginally better. Not to talk about ferrocement which is said to crumble all by itself

If you think your Domi vibrates too much go and get a Fireblade or R1
Reply With Quote
  #8  
Old 28 Nov 2008
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Quote:
Originally Posted by lecap View Post
The Domi most probably uses its engine as something we engineers refer to as a stressed member. Lots of bikes do. Lots of other bikes don't and use either rigid or flexible engine mounts.

Rubber mounting a stressed member of the frame will sooner or later leave you with a cracked frame and perhaps with a couple of cracked bones too.

The reason why the boat's diesel was rubber mounted is it's got a crude chunk of cast iron as crankshaft web, is as heavy as the boat's anchor and lacks sophisticated features like balancer shafts which are abundant in your Domi engine.
The diesel would have vibrated the boat to the bottom of the ocean in no time would it not have been for the rubber mounts. Especially if you are talking fibreglass or wood for the "frame" with relatively thin and large sheets of aluminium or steel only being marginally better. Not to talk about ferrocement which is said to crumble all by itself

If you think your Domi vibrates too much go and get a Fireblade or R1
Exactly.. nearly all engines are stressed members on bikes now.. Deffo on alloy twin spar and alloy tressil frames.. A steel "cradle" frame would probably be ok as the engine is just hanging on the frame but I still wouldnt mess with it..

As people have suggested, Rubber mounting your bars and pegs would do more and getting a gel seat too....
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #9  
Old 28 Nov 2008
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,822
You've been given the solution already.
__________________
Patrick passed Dec 2018. RIP Patrick!

Last edited by mollydog; 26 Mar 2009 at 19:39.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Defender/110 heavy duty roofrack for sale. billh Light Overland Vehicle Tech 2 9 Aug 2009 11:44
Bad vibrations waterloo BMW Tech 4 17 Sep 2007 13:17
Vibrations Macca Triumph Tech 6 22 Apr 2006 05:59
Heavy duty rear spring skip Yamaha Tech 1 28 Jul 2005 19:13
HEAVY DUTY SPOKES Darkenbad North Africa 3 3 Aug 2002 04:19

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 07:56.