Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Honda Tech
Honda Tech Honda Tech Forum - For Questions specific and of interest to Honda riders only.
Photo by Ellen Delis, Lagunas Ojos del Campo, Antofalla, Catamarca

I haven't been everywhere...
but it's on my list!


Photo by Ellen Delis,
Lagunas Ojos del Campo,
Antofalla, Catamarca



Like Tree1Likes

Reply
 
LinkBack Thread Tools Display Modes
  #31  
Old 21 Aug 2012
Registered Users
New on the HUBB
 
Join Date: May 2012
Posts: 8
Quote:
Originally Posted by bkm_br View Post
You guys should also check for this Brazilian website

FalconOnLine - Aprecie sem Moderacao - Índice

There's a lot of information about the bike in this page, but is 100% portuguese.


Cool... another great website... as always... Google Translator helps alot... Love the tutorial parts...

Thanks for sharing!...
Reply With Quote
  #32  
Old 12 Feb 2013
Registered Users
New on the HUBB
 
Join Date: Feb 2013
Posts: 3
To buy or not to buy

I am interested in buying a used Falcon 2008 with 26,000 km on it, here in Costa Rica. Everything here costs twice as much as anywhere else so it will cost almost $7000 after I pay it off with interest, my question is: is this bike something that is worth investing in can be worked on and kept like new over the long haul.Anyone have any input? My other alternatives are to buy a much older bike, or a much cheaper chinese 400, or pay a lot more for a newer one.
Reply With Quote
  #33  
Old 17 Mar 2013
Registered Users
New on the HUBB
 
Join Date: Mar 2013
Posts: 2
Hey Philip,

I am moving down to Costa Rica, near Cartago in June. I am hoping to get a bike to ride, also. The 400 looks like it would fit the bill. Let me know how your shopping is going. Any advice?

Rodney


Quote:
Originally Posted by Philip Reed View Post
I am interested in buying a used Falcon 2008 with 26,000 km on it, here in Costa Rica. Everything here costs twice as much as anywhere else so it will cost almost $7000 after I pay it off with interest, my question is: is this bike something that is worth investing in can be worked on and kept like new over the long haul.Anyone have any input? My other alternatives are to buy a much older bike, or a much cheaper chinese 400, or pay a lot more for a newer one.
Reply With Quote
  #34  
Old 30 Aug 2014
Registered Users
New on the HUBB
 
Join Date: Dec 2007
Location: USA Colombia
Posts: 10
Falcon windshield

Anyone any idea where I could get a windshield similar to the one in Glassware's photo.....?

Thanks..
Reply With Quote
  #35  
Old 31 Aug 2014
Registered Users
Veteran HUBBer
 
Join Date: Sep 2005
Location: Wasatch Mnts, UT, USA
Posts: 227
Quote:
Originally Posted by RAAAY View Post
Anyone any idea where I could get a windshield similar to the one in Glassware's photo.....?

Thanks..
Hi Raaaay. Sent the same in response your PM, but figured I'd post it here in case it can help someone.

A guy in Santiago, Chile makes them. He cuts and presses the plexiglass on site. If you called a Honda dealer in Santiago or contacted the hubb community there, I'd imagine that you could find his contact info.

I do not know if he can ship elsewhere in S. Am. He does not speak English.

cheers
__________________
India Himal, 3mo,2x; Kazak/Krygyz/Tajik, 3 mo; Kashi-Lhasa, China 219! 6 wk; Nepal, 4 days/trekked 55; Santiago-Ushuia-Cusco, 7 mo; Peru, 3 mo; Chile-Medellin 3 mo; Medillin-Arica, 3 mo

Last edited by glasswave; 2 Sep 2014 at 10:22.
Reply With Quote
  #36  
Old 2 Sep 2014
Registered Users
Veteran HUBBer
 
Join Date: Nov 2013
Posts: 679
The 400 is a great machine, sometimes I wish I´d bought a second-hand one instead of a brand new Tornado, though I still love my XR250! Thing with the Tornado is it really hates being loaded up, if you have a fair amount of stuff go with the Falcon. For Tornado pack like a cyclist and youll have a blast on the dirt roads. For highway and long days on the tarmc I´d definitely go for the 400. Finding accessories is fairly straight-forward if your in Brazil, Chile or Argentina, not sure about central America. For Chile, give me a PM and I can help you to find the stuff you need (I know because I´ve already looked!)
Reply With Quote
  #37  
Old 5 Sep 2015
Registered Users
New on the HUBB
 
Join Date: Sep 2015
Posts: 1
Piston kit for Honda NX4 Falcon

Hi, really glad I can see this bike does exist in other parts of the world!
I've managed to damage the cylinder and piston and mine - stupidly running with no oil!
Really struggling to get parts in the UK though.
I'm fairly confident it is almost identical to the XR400 but does anyone know if an XR 1mm oversize or big bore kit will be OK for the NX4?

Any advice would be appreciated!

Thanks!
Reply With Quote
  #38  
Old 28 Sep 2015
stuxtttr's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2007
Location: Lutterworth,Midlands, UK
Posts: 576
ive got a CL400 and that also uses the XR400 engine, I am also interested in the piston kit, I have asked about it on here before but no one seems to have a difinative answer
Reply With Quote
  #39  
Old 29 Sep 2015
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,822
I'd try someone at American Honda.
Contact Us - Honda Powersports

Motorcycle Division
American Honda Motor Co., Inc.
P.O. Box 2200
Torrance, CA 90509-2200
Mail stop: 100-4C-7B
Telephone: (866) 784-1870

From there they could put you in touch with a tech in the Brazilian division.

The CC's on these bikes may be the same as the XR versions but I seriously doubt they share ANY parts. This based on following model evolutions on MANY bikes from the big four over the last 40 years.

If the bores are EXACTLY the same then you could use an XR piston ... but I'm betting it will be slightly different. But if re-boring, then you're OK to use a 1st over piston if there are no interference issues with piston crown vs. Valves.

Good luck!

TIP: On a small single run hard ... check oil EVERY DAY!
Reply With Quote
  #40  
Old 5 Jan 2016
Registered Users
New on the HUBB
 
Join Date: Dec 2015
Posts: 6
New Nx400 owner

Hey everyone,

Does anyone know if the nx400 leaks gas into the oil if
The petcock is left open??


I just purchased a 2010 nx400 in chile.
I'm about to take it south for a few days travel,
and want to make sure eveything is in order.

I stupidly left the petcock open overnight, and I have
no idea how careful the previous owner was.

Thanks, Mike
Reply With Quote
  #41  
Old 6 Jan 2016
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,822
A N Y bike can leak gas into the crankcase and contaminate the oil. It's easy to know ... look at your oil. If, after ten minutes running, it turns a sort of Baby Puke (or Poo) green or light brown, you've got a problem.

If oil is shiny and black as usual ... no worries! It's doubtful fuel will get past your float needle valve.

It's the float needle located in the float bowl that stops fuel flowing.
If debris gets in there, fuel can leak as valve tip won't seal. Or if little rubber tip on needle valve is worn ... then fuel can leak through then too.

ALWAYS ... no matter what ... shut pet cock off at night ... especially if parked inside! If you forget ... no big deal, chances are good your float needle valve is operational and will do it's job and no fuel will flow.

If you ever do get a crankcase full of fuel ... do not ride the bike far (or at all).
Drain oil first, put in NEW oil.

Also, on some bikes, what can happen is that fuel can drain out of Carb overflow vent/tube ... which is better than having it go back into air box and then migrate down into crankcase. Fuel leaking out onto the ground is no big deal ...unless bike is INSIDE ... near a water heater, furnace or other ignition source
Reply With Quote
  #42  
Old 8 Jan 2016
Registered Users
Veteran HUBBer
 
Join Date: Nov 2013
Posts: 679
Oops I always leave it on with my XR250 :/
Reply With Quote
  #43  
Old 27 Apr 2016
Registered Users
New on the HUBB
 
Join Date: Apr 2016
Posts: 3
Quote:
Originally Posted by OBIWAN1971 View Post
Hi, really glad I can see this bike does exist in other parts of the world!
I've managed to damage the cylinder and piston and mine - stupidly running with no oil!
Really struggling to get parts in the UK though.
I'm fairly confident it is almost identical to the XR400 but does anyone know if an XR 1mm oversize or big bore kit will be OK for the NX4?

Any advice would be appreciated!

Thanks!
Obi

I have not had any issues in getting bits for my NX4 in the UK, as basically everything seems to have come from either a Dominator or XR400!! The motor is a little down on power compared to the XR400, but nothing that reworking airbox, exhaust and carb would not sort, but is it worth it...? MY little NX4 will do 70mpg fully laden across France AND Spain at 60-65mph, yet can still trundle down a UK motorway, still fully laden, at 75mph. And after that, it will allow me to go trail riding anywhere i have pointed it...

Drop me PM with your email details and I can send you a pdf of the parts manual.

steveR
Reply With Quote
  #44  
Old 27 Apr 2016
Registered Users
New on the HUBB
 
Join Date: Apr 2016
Posts: 3
[QUOTE=ridethewo

Me too...

I cannot remember when I last really bothered switching fuel off on a bike... Probably a BSA Bantam, circa 1973!! :-)
Reply With Quote
  #45  
Old 11 Jun 2016
Registered Users
New on the HUBB
 
Join Date: Nov 2015
Posts: 4
Hi all, my brother and I are travelling the Americas on two identical falcon 400 nx. They have both developed bad cases of clutch slip. If you are in 5 gear and give it full throttle it will simply slip. anybody else had this problem?
Also getting sick of the disposable air filters as they can be hard to find. Anyone got any solutions for swapping then out for something else?

Sent from my GT-I9195 using Tapatalk
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 3 (0 Registered Users and/or Members and 3 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
help needed / Honda NX4 FALCON 400 ginabun Honda Tech 2 27 Apr 2016 10:41
NX4 Falcon Honda niels Which Bike? 10 21 Dec 2006 17:15
Honda NX4 Falcon? niels Honda Tech 0 9 Aug 2005 02:26

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 19:13.