Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Honda Tech
Honda Tech Honda Tech Forum - For Questions specific and of interest to Honda riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 15 Mar 2008
Registered Users
New on the HUBB
 
Join Date: Aug 2006
Location: Norwich England
Posts: 18
Honda XR650R Engine Oil

Need to do an oil change shortly and would welcome any suggestions as to the best type to use i.e. synthetic/semi etc, viscosity and brand. UK based and currently road use only; apart from last night when I became a little agitated with the traffic in Norwich and decided to ride home cross country totally illegally - but was great fun all the same. Apologies to any farmers who may be viewing. Cheers Bob
Reply With Quote
  #2  
Old 16 Mar 2008
Registered Users
Veteran HUBBer
 
Join Date: May 2002
Location: London, UK
Posts: 635
anything you like, mate. I've been all over africa, australia, russia and the middle east on them. I've had to use oil for diesel engines, SAE 40, 20W50, 0W50 synthetic. I also used 80 octane rubbish and the worst effect has been a bit of smoke. no pinking, just black smoke and a bit of glaze in the carb.

together with two mates, we've done 120-150,000km on BRPs and they're tougher than all of us ... one of them got water in his enigne, changed the oil and set off across australia.

let me know if you manage to blow yours up or wear it out cos honda built 'em to outlast all of us
Reply With Quote
  #3  
Old 3 May 2008
Registered Users
New on the HUBB
 
Join Date: May 2008
Posts: 2
I have had some problems with clutch slippage when using synthetics. As in, the bike would lurch forward with the clutch lever pulled in and switching into first gear.

The clutch system is lubricated by the same oil the engine uses and seems to not care for the synthetics. I would recommend sticking with standard 4 stroke oil.

I have heard from tons of other people who have had no problem using synthetics, but from my experience, its a bad idea.
Reply With Quote
  #4  
Old 3 May 2008
Registered Users
HUBB regular
 
Join Date: Nov 2007
Location: Chiang Mai, Thailand
Posts: 26
Quote:
Originally Posted by jomammie View Post
I have had some problems with clutch slippage when using synthetics. As in, the bike would lurch forward with the clutch lever pulled in and switching into first gear.
......
The source of the problem you described must be something else, like clutch cable maladjustment or warped clutch plates, which can all be a source of a clutch dragging when you switch into first gear and engage the clutch. The increased slipperiness due to the friction modifiers used in synthetic oil could indeed be a possible source of clutch slippage but only under load and thus with the clutch engaged, not with the clutch disengaged as you mention.

If the bike starts moving forward when the clutch is disengaged and is in gear, that means there is excessive friction between the friction and pressure plates in the clutch. The clutch plates are not completely disengaged, and thus 'drag' each other along. Your argument doesn't hold, as the friction modifiers contained in synthetic oil reduce friction compared to mineral oils with similar viscosity. So if the bike lurches forward when kicked into gear, the 'clutch drag' problem should be even worse when using mineral oil. The 'clutch drag' problem that your bike suffered from is in fact the opposite of the problem you referred to with respect to the use of synthetic oils. The problem of clutch slippage when using synthetic oil usually occurs when the engine is working under full load, so at high revs and/or under full acceleration.

This said, forget about semi-synthetic oils, it's the biggest marketing scam in the lubrication business. Either spend more on fully synthetic oil or save your money and buy a good quality mineral oil and change oil more often. All my thumpers run on fully synthetic oil and I never had a problem with clutch slippage with any of them(*), even racing enduro's in the tropics or adverse travelling conditions (high temperatures in Africa and Asia). But that's only my experience, some might have experienced otherwise.

(*)Currently own 13 bikes. Apart from my XR650R, my four KTM EXC's (2x450, 520, 525), KLR650, BMW F650, and two XT350's all run on synthetic without any clutch slippage.

Last edited by GypsyRider; 3 May 2008 at 20:04.
Reply With Quote
  #5  
Old 3 May 2008
Registered Users
HUBB regular
 
Join Date: Nov 2007
Location: Chiang Mai, Thailand
Posts: 26
Quote:
Originally Posted by RichLees View Post
anything you like, mate. I've been all over africa, australia, russia and the middle east on them.
Forgive me for hijacking this thread as my question is off topic, but I'd like to ask RichLees if he reinforced or even replaced the XR650R's notoriously weak subframe with a custom-made stronger frame (made of steel?) in order to carry luggage on his long journeys. I've ridden my XRR up and down the entire length of the Baja, but without carrying any luggage to speak of, only a lightweight sleeping bag and pad. I'd like to take my XRR on a longer trip but the OE subframe can't carry any weight. Any suggestions?
Reply With Quote
  #6  
Old 3 May 2008
Registered Users
New on the HUBB
 
Join Date: May 2008
Posts: 2
Thats all very technical and thanks for your reply... but it was definitely the synthetic oil causing the problem.

When I opened up the clutch housing a super sticky mess had been created in there by the synthetic oil. It took a long time to clean out and get working again. And after cleaning all the old oil off the parts... low and behold, a perfect shifting bike.

Thanks for your technical response, but I stick to the statement that synthetic oil with mess up your clutch.

Stay away from it.
Reply With Quote
  #7  
Old 5 May 2008
Registered Users
Veteran HUBBer
 
Join Date: Aug 2007
Location: kuala lumpur
Posts: 212
difference between a 2wheel and 4wheel 4T oil?

Quote:
Originally Posted by RichLees View Post
anything you like, mate. I've been all over africa, australia, russia and the middle east on them. I've had to use oil for diesel engines, SAE 40, 20W50, 0W50 synthetic. I also used 80 octane rubbish and the worst effect has been a bit of smoke. no pinking, just black smoke and a bit of glaze in the carb.
Hi Rich, hows it going?
Im in the process of changing my NX650 oil pretty soon! As usual due to financial crisis Im looking for cheapest but good oil. Since you mention it... looks like I might just use Castrol GTX its the cheapest on the market!
I also found a Moped (4stroke 110cc) oil filters that is not only fits but INDENTICAL to the NX!! Should I use this filter?:confused1:
__________________
Ride
Safe,
Sober,
& Save!
"man without beard is like porridge without salt": Ned Kelly
Reply With Quote
  #8  
Old 9 May 2008
Registered Users
Veteran HUBBer
 
Join Date: May 2002
Location: London, UK
Posts: 635
on the ozzie and africa trip, I had rear tanks with 13 litres of fuel on the right and 11 litres of water on the left. the exhaust was routed under the right tank and the tent slung under the left. the rear tank rack was mofo heavy but connected to the footrests and a long stud where the subframe is usually bolted to the frame. the steel min-sub-frame was also reinforced. all in all, the aluminium subframe was kind of bypassed and gave no grief despite having 12kg of luggage on the tail piece and another 7kg on a front rack.

on the middle east/asia trip, I had a 15-17kg kit bag on the back without having reinforced the rear subframe, but I rode like a jessie and stuck to tar (I'd cracked a vertebra in June and was chicken about hurting it again)

GTX is fine for the way most of us ride most of the time. I'd rather replace reasonable oil regularly than leave good stuff in forever

happy travels! may your oil checks be regular and your changes be free from shiney metallic bits
Reply With Quote
  #9  
Old 9 May 2008
Contributing Member
Veteran HUBBer
 
Join Date: Aug 2005
Posts: 839
Wink Xr

when do we get to see some pict of your trips, you have to learn to share .
Reply With Quote
  #10  
Old 12 May 2008
Registered Users
Veteran HUBBer
 
Join Date: Aug 2007
Location: kuala lumpur
Posts: 212
Quote:
Originally Posted by RichLees View Post

GTX is fine for the way most of us ride most of the time. I'd rather replace reasonable oil regularly than leave good stuff in forever

happy travels! may your oil checks be regular and your changes be free from shiney metallic bits
Thanx for the advice, what about the filters, should I used the 4 stroke 100cc postie bike filter for my Dommie? Its very indentical!!

I just had new sleeves/piston..... am I supposed to find those metallic bits? What happen if its there?
__________________
Ride
Safe,
Sober,
& Save!
"man without beard is like porridge without salt": Ned Kelly
Reply With Quote
  #11  
Old 13 May 2008
Caminando's Avatar
Moderated Users
Veteran HUBBer
 
Join Date: Jan 2006
Location: DogZone Country
Posts: 1,218
Quote:
Originally Posted by GypsyRider View Post
The source of the problem you described must be something else, like clutch cable maladjustment or warped clutch plates, which can all be a source of a clutch dragging when you switch into first gear and engage the clutch. The increased slipperiness due to the friction modifiers used in synthetic oil could indeed be a possible source of clutch slippage but only under load and thus with the clutch engaged, not with the clutch disengaged as you mention.

If the bike starts moving forward when the clutch is disengaged and is in gear, that means there is excessive friction between the friction and pressure plates in the clutch. The clutch plates are not completely disengaged, and thus 'drag' each other along. Your argument doesn't hold, as the friction modifiers contained in synthetic oil reduce friction compared to mineral oils with similar viscosity. So if the bike lurches forward when kicked into gear, the 'clutch drag' problem should be even worse when using mineral oil. The 'clutch drag' problem that your bike suffered from is in fact the opposite of the problem you referred to with respect to the use of synthetic oils. The problem of clutch slippage when using synthetic oil usually occurs when the engine is working under full load, so at high revs and/or under full acceleration.

This said, forget about semi-synthetic oils, it's the biggest marketing scam in the lubrication business. Either spend more on fully synthetic oil or save your money and buy a good quality mineral oil and change oil more often. All my thumpers run on fully synthetic oil and I never had a problem with clutch slippage with any of them(*), even racing enduro's in the tropics or adverse travelling conditions (high temperatures in Africa and Asia). But that's only my experience, some might have experienced otherwise.

(*)Currently own 13 bikes. Apart from my XR650R, my four KTM EXC's (2x450, 520, 525), KLR650, BMW F650, and two XT350's all run on synthetic without any clutch slippage.
I agree with your point that semi or synthetics should ease the problem of a dragging clutch rather than worsen it.

Why do you say that semisynthetics are a scam? You may be right but what's your evidence?
Reply With Quote
  #12  
Old 14 May 2008
Registered Users
Veteran HUBBer
 
Join Date: Aug 2007
Location: kuala lumpur
Posts: 212
I heard that too!

Heard about clutch slippage due to synthetic oil before... but not sure if its true.

Lots of my riding buddys were using "MOBIL 1" when it was first introduce here (in the mid 90's in think) mostly sportsbike though. They also had the same problemo! eversince that I always have the impression to stay away from them.

like Rich said: use the reasonable ones & change it regularly than keeping the good ones...
btw Rich whats the measurement for the oil? 3litre right? its not in the manual...
__________________
Ride
Safe,
Sober,
& Save!
"man without beard is like porridge without salt": Ned Kelly
Reply With Quote
  #13  
Old 15 May 2008
BDG BDG is offline
Registered Users
HUBB regular
 
Join Date: Mar 2006
Location: Manchester UK
Posts: 93
Quote:
Originally Posted by Osama Radzi View Post
Heard about clutch slippage due to synthetic oil before... but not sure if its true.

Lots of my riding buddys were using "MOBIL 1" when it was first introduce here (in the mid 90's in think) mostly sportsbike though. They also had the same problemo! eversince that I always have the impression to stay away from them.

like Rich said: use the reasonable ones & change it regularly than keeping the good ones...
btw Rich whats the measurement for the oil? 3litre right? its not in the manual...
From memory without looking at the manual, (mine sure does have oil capacity in the manual) the XR650 takes 2 litres of oil in total from new or when rebiult, but when changing the oil and filter its about 1.7 litres but you won't get 1.7 litres in in one go without getting it kicked over or running to circulate it a bit.
Reply With Quote
  #14  
Old 1 Apr 2011
mmaarten's Avatar
Gold Member
Veteran HUBBer
 
Join Date: Sep 2001
Location: Thailand at the moment
Posts: 593
dragging due to sticking? stick to mineral

Although it seems strange, it is a fact that some engines (mostly hondas) have a clutch problem with synthetic oil.
Synthetic oils "stick" better to surfaces, that is part of their good characteristics.... except when the space between clutch-plates is very very narrow. The oil-film that "sticks" to the clutch-plates is causes the plates to be "sucked" together.
This causes a "sticky" clutch, difficult and noisy gear-shifting and a problem getting it in neutral.

The same effect can occur when you use oil that is to "thick" (wrong viscosity).

If this problem occurs, just "stick" to mineral oil

Happy miles,
Maarten
Reply With Quote
  #15  
Old 7 Jun 2012
Registered Users
New on the HUBB
 
Join Date: Feb 2012
Location: Uganda
Posts: 5
synthetic back to mineral oil

I have synthetic in my bike at the moment and i have heard that if you change back to mineral the oil will sludge, is this true and if so how can i get around that.

thanks guys
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
XT600E engine oil level bogweasel Yamaha Tech 10 14 Jan 2011 20:29
honda engine to fit XR 250 martync Honda Tech 3 9 Dec 2010 11:03
Moto engine oil swells O-rings...??? alexpezzi Equipping the Bike - what's the best gear? 9 24 Nov 2007 08:01
engine woes fward Yamaha Tech 7 5 Sep 2007 07:30
problems with honda dominator( engine stall) alcasi Honda Tech 3 1 Jun 2007 18:17

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 17:27.