Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Honda Tech
Honda Tech Honda Tech Forum - For Questions specific and of interest to Honda riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 4 Feb 2010
Registered Users
HUBB regular
 
Join Date: May 2009
Location: Norway
Posts: 27
Do I need to change my stearing bearings, AT RD07

I am just wondering if this is how it should be. When I lift the front wheel up from the ground and turn the stearing bar, it is like I feel a uneveness when it is near center. And if I let go of the bar, it centers by itself. Is this normal, or does the bearings need to be changed? I haven't experienced this on my other bikes, so I am not sure if this is normal.
Reply With Quote
  #2  
Old 4 Feb 2010
Registered Users
New on the HUBB
 
Join Date: Feb 2009
Location: Melbourne, Australia
Posts: 18
That definitely sounds like steering bearings. The balls create an indentation in the bearing race in the straight ahead position, because this is where you're pointed when going over most bumps and corrugations. It will gradually get worse and eventually become more difficult to ride in a straight line. Therefore, I think they are worth replacing at a convenient time.
Reply With Quote
  #3  
Old 4 Feb 2010
Registered Users
HUBB regular
 
Join Date: May 2009
Location: Norway
Posts: 27
thought so. are they alike both up and down? and are they often sold in pairs? Find little info about it.

Do anyone know if there is a part map somewhere on the internet for the bike?
Reply With Quote
  #4  
Old 4 Feb 2010
kevinhancock750's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Nov 2006
Location: gone for a spin
Posts: 269
sets

they are normally sold in sets/kit, unless you go to a bearing specialist where you can buy them seperate. it's best to change all the bearings at the same time, i'm not sure if they're same top and bottom but i dont think so. cant help on parts map sorry.
Reply With Quote
  #5  
Old 7 Feb 2010
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Before you strip anything down, you will need to buy the lower dust seal which sits underneath the bearing race on the fork steerer.

It's almost impossible to remove the lower bearing race off the forks without destroying it, unless you have a specialised bearing puller.

Most of us use the "haynes" technique of slowly prizing the race off using screwdrivers etc which will ruin the dust seal.

It's only a few quid anyway.
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #6  
Old 8 Feb 2010
Gold Member
Veteran HUBBer
 
Join Date: Dec 2007
Location: Singapore
Posts: 157
Quote:
Originally Posted by lonelybiker View Post
I am just wondering if this is how it should be. When I lift the front wheel up from the ground and turn the stearing bar, it is like I feel a uneveness when it is near center. And if I let go of the bar, it centers by itself. Is this normal, or does the bearings need to be changed? I haven't experienced this on my other bikes, so I am not sure if this is normal.
i had the same problem. then i bought a set of 'tapered' type bearing in australia. i took out the steering head and observed the balls. there wasnt any problem with it. so i grease it and put it back. while putting it back, all the balls fell of from the plastic and i had to replace with the new bearings that i bought. so.... the lower bearings: im using the ball type. the uppder bearings, im using the tapered type. dont know how long it will last.
Reply With Quote
  #7  
Old 8 Feb 2010
Registered Users
HUBB regular
 
Join Date: May 2009
Location: Norway
Posts: 27
Quote:
Before you strip anything down, you will need to buy the lower dust seal which sits underneath the bearing race on the fork steerer.

It's almost impossible to remove the lower bearing race off the forks without destroying it, unless you have a specialised bearing puller.

Most of us use the "haynes" technique of slowly prizing the race off using screwdrivers etc which will ruin the dust seal.

It's only a few quid anyway.
Do you know the part number? or can you post a link from Honda Motorcycle Parts, Kawasaki, Suzuki and Yamaha Motorcycle Parts - ATV, Classic Bike, Dirt Bike Parts
Reply With Quote
  #8  
Old 8 Feb 2010
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Quote:
Originally Posted by lonelybiker View Post
Sorry, I don't know the part number.
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #9  
Old 19 Feb 2010
1gear1brake's Avatar
Registered Users
New on the HUBB
 
Join Date: Jan 2008
Location: Portland, UK
Posts: 7
Try Wemoto for your head bearings lonelybiker. This set includes the top and bottom seals. Loads of Africa Twin information (and quite a few of your countrymen) over at XRV.Org.uk. Come on, and you won't be lonely anymore!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
XRV RD07, my small but annoying issues. Singaporedream Honda Tech 97 4 Feb 2010 01:25
Challenges with RD07 engine on around 4500 rpm praatika Honda Tech 3 8 Dec 2009 05:08
twisted stearing xtz660 futronix Yamaha Tech 1 21 Mar 2007 15:18
For Sale: 43 L Tank for AfricaTwin RD07 madmarco TRAVEL Equipment for Sale / Wanted 4 17 May 2005 06:23
Air filter Africa Twin rd07 frnas Honda Tech 4 29 Apr 2003 14:40

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 19:11.