Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Equipping the Bike - what's the best gear?
Equipping the Bike - what's the best gear? Anything to do with the bikes equipment, saddlebags, etc. Questions on repairs and maintenance of the bike itself belong in the Brand Specific Tech Forums.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10 Jan 2007
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
need tig welder advice

Hi
I am fairly adept at soldering, brazing and stick welding, but would now like to learn tig welding. What I have in mind is one of those inverter type welders which will do both stick and tig.
Does anyone know which is a fairly modern book on 'how to tig weld at home' type of book?
What I would like to to is read something to learn enough to make a good choice of machine.
also , anyone has any preference for features or models of home tig welding machine

The uses for this machine are a small amount of car bodywork (possibly) 1/8th thick or less aluminium and stainless. The stick part would be farm maintenance ( I have a good old fashioned stick welder anyway)

many thanks
Larry
Reply With Quote
  #2  
Old 10 Jan 2007
bikerz's Avatar
Contributing Member
HUBB regular
 
Join Date: Aug 2006
Location: portugal
Posts: 75
tig welding

for that thickness tig welding the smallest - and cheapest inverter will do fine.go to the library, there will be books there - free - on how to weld with tig but the best way is to practice. all the small inverters require striking to start where you'll find most books etc tend to assume you are using big posh machines so practice makes perfect.
you can get them for 100 +- quid so they are not that expensive, but you need to get an argon cylinder which when you've done the contract etc etc can be a bit pricy. you'll also need to buy guages and regulator for the bottle so the price starts to rise - invest if you will be using it alot otherwise get a mig - cheap and cheerfull, not as pretty as tig but ok.
as i say there's no substtute for experience so if you're set on a tig, get all the gear and practice practice..it's not that hard if you can braize etc.
Reply With Quote
  #3  
Old 10 Jan 2007
bikerz's Avatar
Contributing Member
HUBB regular
 
Join Date: Aug 2006
Location: portugal
Posts: 75
forgot - you will need big and expensive tig welder and years of practice / tutoring to be able to weld alluminium nicely - stainless is easy and can be done on small inverter no probs. you need dc welder for ally mucho dosh, mucho skill required
Reply With Quote
  #4  
Old 11 Jan 2007
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
Thanks bikerz
Reply With Quote
  #5  
Old 12 Jan 2007
Registered Users
New on the HUBB
 
Join Date: Apr 2005
Location: ojai, ca usa
Posts: 19
I bought a nice tig outfit to teach myself to weld aluminum, not easy at all I would suggest a class, I can produce a good weld only about 10% of the time.
Reply With Quote
  #6  
Old 12 Jan 2007
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
seems that to weld aluminium, you have to buy one that welds ac. These are expensive.
Reply With Quote
  #7  
Old 12 Jan 2007
Mr. Ron's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: Vancouver, BC, for now...
Posts: 792
Quote:
Originally Posted by oldbmw
seems that to weld aluminium, you have to buy one that welds ac. These are expensive.
This is correct. Aluminium is by far the hardest allot to weld. You need AC power and LOTS of it. With a 180 amp DC inverter you can weld up to 1/4" steel. For the same thickness in aluminum you will need at least 200 amps and pre-heat with a torch. Aluminum needs AC to clean the metal as you weld, or oxidation occurs. Aluminum also sucks away all your heat rather rapidly, so you need the high amps to maintain this temprature. I've welded 3/4 ally plat using a full 300 amps and preheat with a tiger torch for 5 min. before achieving adequate penatration. With Ally, you can never touch down! Steel is a little more forgiving. If you plan on welding ally, an inverter thats less than 200 amps will be limited to the point of useless IMHO. You can use Argon for both ally and steel. TIG welding is lots of fun once you get the hang of it. If you can tap your toe, rub your belly and pat your head all to a diferent beat, your halfway there!
Reply With Quote
  #8  
Old 13 Jan 2007
Dodger's Avatar
Large Golden Member
Veteran HUBBer
 
Join Date: Aug 2005
Location: BC, Canada
Posts: 1,085
If you can gas weld with oxy/acetylene then you can TIG weld .
You will need to practise though and evening classes would be a good idea to set you on the right road .
A 185 amp welder AC/DC with high frequency start should do the trick .
It can be used for stick welding too and will handle all you might want to do as an amatuer .
Avoid the cheap brands and look for models made by Lincoln ,Miller or the better brands in your country .
If you don't need to weld aluminium then a DC welding machine will suffice .
You will need a TIG torch and regulator for an argon cylinder.
Don't buy used equipment unless you have seen it working.
Good equipment is not cheap but it IS worth it if you want to do the job properly .
__________________
Blessed are the cracked, for they let in the light. - Spike Milligan
"When you come to a fork in the road ,take it ! When you come to a spoon in the road ,take that also ."
Reply With Quote
  #9  
Old 13 Jan 2007
Dodger's Avatar
Large Golden Member
Veteran HUBBer
 
Join Date: Aug 2005
Location: BC, Canada
Posts: 1,085
more info
http://www.millerwelds.com/education/TIGhandbook/
This is a very good site and you can read about all the Miller models .

Lincoln stuff here
http://www.lincolnelectric.com/

You don't need an inverter unless you really want to go down that route .
Once you have mastered the art of TIG on mild steel , then you can start on stainless and finally aluminium which is fairly straightforward once you have the hang of it .
__________________
Blessed are the cracked, for they let in the light. - Spike Milligan
"When you come to a fork in the road ,take it ! When you come to a spoon in the road ,take that also ."
Reply With Quote
  #10  
Old 28 Jan 2007
Registered Users
Veteran HUBBer
 
Join Date: Aug 2001
Location: sunny England
Posts: 790
aluminium and its alloys are very hard to weld, especially on DIY kit. it takes the lads at work (aircraft repair) four years to learn, and then they might never get it. and if you think thats hard, try titanium!

steel on the other hand is pretty easy. to get kit able to weld alu will cost a lot to buy, but nearly any small welder will do 1/8 steel. TIG takes practice, have you cosidered a MIG set?
__________________
dave
Reply With Quote
  #11  
Old 28 Jan 2007
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
Quote:
Originally Posted by DAVSATO

steel on the other hand is pretty easy. to get kit able to weld alu will cost a lot to buy, but nearly any small welder will do 1/8 steel. TIG takes practice, have you cosidered a MIG set?
Years ago i thought to get a mig set for fabrication ( at that time mainly mild steel with some stainless) butthe tig was intended to produce better looking welds.
Reply With Quote
  #12  
Old 28 Jan 2007
Registered Users
Veteran HUBBer
 
Join Date: Aug 2001
Location: sunny England
Posts: 790
Talking

ah i see. it does look better, but i found MIG a bit easier. after welding a few expensive tungsten electrodes to my test pieces i gave up and went gasless MIG.
heres a question for you then..........
you buy a budget TIG set, it comes with some filler rods, a handset, AND A HANDHELD FACEMASK.
how do you hold three things with two hands?

please, i dont want to hear from any isle of wight sister shaggers wondering why ive only got two hands
__________________
dave
Reply With Quote
  #13  
Old 28 Jan 2007
palace15's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Feb 2005
Location: LONDONISTAN, England
Posts: 1,034
Smile Classic

please, i dont want to hear from any isle of wight sister shaggers wondering why ive only got two hands[/QUOTE]


Got to smile at this !!
__________________
'He who laughs last, was too slow to get the joke'
Never confuse the map with the journey.
Reply With Quote
  #14  
Old 29 Jan 2007
Dodger's Avatar
Large Golden Member
Veteran HUBBer
 
Join Date: Aug 2005
Location: BC, Canada
Posts: 1,085
Quote:
Originally Posted by DAVSATO
ah i see. it does look better, but i found MIG a bit easier. after welding a few expensive tungsten electrodes to my test pieces i gave up and went gasless MIG.
heres a question for you then..........
you buy a budget TIG set, it comes with some filler rods, a handset, AND A HANDHELD FACEMASK.
how do you hold three things with two hands?

please, i dont want to hear from any isle of wight sister shaggers wondering why ive only got two hands
Maybe you hold the facemask between your teeth .
Might have to bend the handle a bit .
I've heard the raspberry flavoured ones are really good .
__________________
Blessed are the cracked, for they let in the light. - Spike Milligan
"When you come to a fork in the road ,take it ! When you come to a spoon in the road ,take that also ."
Reply With Quote
  #15  
Old 29 Jan 2007
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
I have to admit i use a helmet type mask, with changeable filters plus plain glass for the spatter. ( necessary for brazing )
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Advice wanted Arizona to BC and back mje1967 Route Planning 14 10 Dec 2006 22:54
A bit of basic advice about tracks... Sly-Fox Australia / New Zealand 5 25 Oct 2006 03:07
africa route advice please (border crossings) deebee Route Planning 8 29 May 2006 22:11
Advice for bike hire/travel in Argentina mark s SOUTH AMERICA 2 6 Oct 2005 21:50
Advice? S. Italy,Greece,Turkey, Black Sea MCP Europe 2 12 May 2003 04:06

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 03:23.