Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Equipping the Bike - what's the best gear?
Equipping the Bike - what's the best gear? Anything to do with the bikes equipment, saddlebags, etc. Questions on repairs and maintenance of the bike itself belong in the Brand Specific Tech Forums.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #16  
Old 24 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Apr 2006
Location: Tallinn, Estonia
Posts: 1,048
Whichever is chosen, I'm not sure that the insulating/conductive qualities are so important. The effects are margnial IMO.

SS or Alloy may conduct heat bettrer but they are also shiny so they reflect heat radiation back toward the engine. Ply may insulate, but is opaque so does not reflect any heat back.

More importantly, where does an engine generate its heat and where are most of its cooling design traits? The cylinder; some way from the sump... My guess is that engine temps on a moving bike would not differ that much.

Having said all that I would probably choose Ally over ply. In my case its for the sidecar undercariage, and ply is a lot easier to work with than ally and a lot cheaper too. No contest for me, even if it may not look as cool...
__________________
Adventure: it's an experience, not a style!
(so ride what you like, but ride it somewhere new!)
Reply With Quote
  #17  
Old 24 Feb 2009
Caminando's Avatar
Moderated Users
Veteran HUBBer
 
Join Date: Jan 2006
Location: DogZone Country
Posts: 1,218
Afterthought - Mollydog's comments on steel bashplates make me think that 1.5-2mm mild steel would deform well under impact and has all the benefits of being easy to weld and shape. Good paint will stop rust.
Reply With Quote
  #18  
Old 24 Feb 2009
Gold Member
Veteran HUBBer
 
Join Date: Oct 2008
Posts: 619
Guilt

Please ignore my comments on temps as they only apply to me and my bike. I put a deep sump on a guzzi and fitted an oil filter to the rear of it. The sump is now very low and the bike is vulnerable to stones thrown up in a third world situation, not in Europe. I want to use the bike once in this situation and it'll be summer so the temperature and protection apply to me only on this one trip. Appearances don't matter so I'll use a sheet of ply and chuck it away after the trip. I guess it should be called a stone guard. I was in New Zealand a while ago and ungraded roads wrecked the floor pans and exhaust of cars on them which made me think about the poor oil cooler! Linzi.
Reply With Quote
  #19  
Old 24 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Apr 2005
Location: Oxford UK
Posts: 2,102
My CCM came with a factory fitted stainless steel bashplate - just a simple flat sheet that covers the bottom of the engine and bends up at the front to protect from stuff thrown up from the front wheel - no side wings etc. It's 2.1mm thick and weighs a ton (you have to take it off to change the oil).

I turned down the offer of a new stainless plate with wings and other bits from someone on the owners club site because of the weight.

2.1mm does seem to be overkill and enough to protect against just about anything that the bike is likely to come up against (although I admit that I'm no expert). Anything that would get past the plate would most likely have completely wrecked the engine. If it just to stop stones etc from damaging the crankcase then half the thickness would probably be good enough.
Reply With Quote
  #20  
Old 24 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: Danmark
Posts: 346
Ask the 4WD guys, they prefer steel rims over aluminium, because steel will bend rather than shatter and can be bashed back in shape.
__________________
Poul
May you enjoy peace and good health !
Reply With Quote
  #21  
Old 24 Feb 2009
steved1969's Avatar
Gold Member
Veteran HUBBer
 
Join Date: Jul 2008
Location: Yorkshire UK
Posts: 106
Thanks everyone for your input, looks like stainless may not be a bad option after all, will see how it goes and post a few pics if everything goes to plan.
Reply With Quote
  #22  
Old 24 Feb 2009
Registered Users
Veteran HUBBer
 
Join Date: Jun 2008
Posts: 236
Quote:
For bash plates the deformation of alloy makes it very suitable indeed. Mild steel doesn't have the same ability to absorb energy in big strikes. You're more involved in furniture than I am as I only use it but surely you are doing it an Funny how different peoples' views can be.
no worries linzi, its a good point you made. only used mild steel once to make a botel opener years ago in high school lol even then i remeber thinking "could i use this to make a part for my bike/bicycle" haha
Reply With Quote
  #23  
Old 24 Feb 2009
Gold Member
Veteran HUBBer
 
Join Date: Oct 2008
Posts: 619
What do I know?

As others have said mild steel doesn't tear, unlike alloy. I am simply a huge supporter of people who use materials in ways others haven't thought of and wood is one such. Much underestimated ply is environmentally superb. Linzi.
Reply With Quote
  #24  
Old 24 Feb 2009
Big Yellow Tractor's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2008
Location: England
Posts: 649
Ply would work fine for a while but won't cope well with being wet then dry, hot and dry on one side and muddy and wet on the other. Also quite good at soaking up oil which will make it go soft. Might reduce the oil stains on your kitchen floor though
Reply With Quote
  #25  
Old 24 Feb 2009
Gold Member
Veteran HUBBer
 
Join Date: Oct 2008
Posts: 619
All good

Yes indeed but I only want stone protection for one trip to north africa--you suggesting Guzzies leak oil then?
Reply With Quote
  #26  
Old 24 Feb 2009
Big Yellow Tractor's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2008
Location: England
Posts: 649
Quote:
Originally Posted by Linzi View Post
Yes indeed but I only want stone protection for one trip to north africa--you suggesting Guzzies leak oil then?
No, just a reference to my Wife's unrealistic objections to motorbikes in the kitchen. Do Guzzies leak oil then ??
The one that I will never be forgiven for is walking a big dollup of the black crud that collects on the frame near the front sprocket, into the hallway and up the stairs; approx. 20 mins after the carpet fitters had left

Being a chippy and having some experience of plywood boats, I think a good lump of ply as a stoneguard is a cool idea. When I was involved with F1, they had odd bits of ply stuck on the floorpan of the cars as sacrificial guards.
Reply With Quote
  #27  
Old 1 Mar 2009
Registered Users
HUBB regular
 
Join Date: Oct 2006
Posts: 55
The biggest problem with plywood will probably be its inability to "slide", thats the area where steel might win out over aluminium.


Maybe
Reply With Quote
  #28  
Old 4 Mar 2009
Registered Users
New on the HUBB
 
Join Date: Feb 2009
Location: Venlo, The Netherlands
Posts: 6
Hello there,

I am a student aerospace engineering and I've learned a thing or two about material properties. Steel is about three times stronger than aluminium and three times heavier. (Depending on which types of course) The reason aluminium is mainly used to make airplanes is a combination of material properties, but the major reason is that because you need only one third of the thickness of the aluminium version if you use steel, you will have more buckling when the material is under compression, because it is so thin.
So you could use a stainless steel bash plate, and it could be one third of the thickness of a aluminium one, but make sure that it is thick enough to sufficiently resist denting, because you wouldn't want it to bend against your engine with every little stone.
The reason that most bash plates are made of aluminium are probably, weight reduction, corrosion resistance (stainless does not mean that it does not rust!), ease of production/manufacturing and looks.
Another alternative would be plastic bash plates, which can even be stronger than metal ones, provided the correct type of plastic is used. Another would be carbon/kevlar composite, which would be the best way to go, carbon is really very strong, but also brittle, when you combine it with kevlar, it is very strong and no longer brittle, and it is much lighter. The only downside is that it is slightly more difficult to repair (though not very difficult).
Wood on the other hand is an excellent material strength wise, and it is also very suitable for airplanes, the reason it is no longer used for that purpose is that it is more difficult to manufacture, it needs much more maintenance and is not that resistant against outside influences (warm/cold, fire, water etc.) This also applies for motorcycles of course.

So, you could use alloy or stainless steel if you'd want to without much difference in use. If you'd want something else (or better) go for a composite material and if you go for wood, do not expect it to last long.

Just my view on things,
Habicht
Reply With Quote
  #29  
Old 4 Mar 2009
Registered Users
Veteran HUBBer
 
Join Date: Apr 2008
Location: West Yorkshire UK
Posts: 1,785
Plywood is a fantastic material especially layered up with balsa (proper aircraft type). This really needs hot bonding, so isn't easy at home. For wooden items at home, try covering in fibreglass resin. It's a true carbon based composite too, so you can impress any rice rocket power ranger type mates down the pub

Andy
Reply With Quote
  #30  
Old 4 Mar 2009
Gold Member
Veteran HUBBer
 
Join Date: Oct 2008
Posts: 619
Chairs

I'm looking for an old school chair made of ply. They had a good width and a handy curve. I envisage cutting it off so I have a flat panel with an upswept front. This will be perfect for my bike's shape and the fact that it's recycled and environmentally sound pleases me no end. It's only going to be used on unsealed roads at worst. ( Famous last words, adventurer in blood). Linzi.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Silly, unanswerable question#1 Birdy Route Planning 31 16 Aug 2008 21:18
probably a silly question but! davidR SOUTH AMERICA 2 11 Sep 2006 20:47
Perhaps another silly question flashy_cj Camping Equipment and all Clothing 7 4 May 2006 23:31
(Maybe silly ) Question on tyres maria41 Equipment Reviews 11 9 Apr 2006 11:12
india (silly question) martync West and South Asia 4 28 Nov 2004 19:07

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 21:43.