Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Equipping the Bike - what's the best gear?
Equipping the Bike - what's the best gear? Anything to do with the bikes equipment, saddlebags, etc. Questions on repairs and maintenance of the bike itself belong in the Brand Specific Tech Forums.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Like Tree5Likes

Reply
 
LinkBack Thread Tools Display Modes
  #46  
Old 5 May 2010
Mickey D's Avatar
Moderated Users
Veteran HUBBer
 
Join Date: Jan 2010
Location: California
Posts: 501
Common electrical conduit, made in 20 minutes. Cost? Scrape piece, free.

My bags are not supported by the racks, they only rest on them. Principle job of the left side rack is to keep bag out of rear tire. This system has worked OK on some rough going. They are attached but only to keep them from flopping up and down. Cross straps across the seat take most of the load.

Poor man's solution:
Reply With Quote
  #47  
Old 6 May 2010
Moderator, Contributing Member
Veteran HUBBer
 
Join Date: Sep 2005
Location: Lancashire England
Posts: 313
Quote:
Originally Posted by Steve Pickford View Post
Here you go:

Ocean Slim Tank - Fuel, General Chandlery | Mailspeed Marine

They also do a cheaper version in white for water only. Cap's aren't lockable, we might just roll some duct tape around it to keep it secure on bumpy roads.
Mornin' Steve,

ta for the info.

Regards

Reggie
Reply With Quote
  #48  
Old 7 May 2010
Moderator, Contributing Member
Veteran HUBBer
 
Join Date: Sep 2005
Location: Lancashire England
Posts: 313
Quote:
Originally Posted by Steve Pickford View Post
Here you go:

Ocean Slim Tank - Fuel, General Chandlery | Mailspeed Marine

They also do a cheaper version in white for water only. Cap's aren't lockable, we might just roll some duct tape around it to keep it secure on bumpy roads.
Hi Steve,

just ordered a pair from them today, one for me and one for my mate Doc.

They didn't have them in stock so I can expect them on Wednesday or Thursday. Thanks again for the heads up.

Regards

Reggie
Reply With Quote
  #49  
Old 7 May 2010
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
Glad to help, post pics of the mounting when it's done.
__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #50  
Old 7 May 2010
Moderator, Contributing Member
Veteran HUBBer
 
Join Date: Sep 2005
Location: Lancashire England
Posts: 313
Quote:
Originally Posted by Steve Pickford View Post
Glad to help, post pics of the mounting when it's done.
Hi Steve,

I sure shall.

Regards

Reggie
Reply With Quote
  #51  
Old 16 May 2010
Selous's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Jan 2010
Location: England
Posts: 437
there is a guy on the GS Forum who makes his own box's & racks, suggest you run a search on there. contact him
__________________
We are the Pilgrims, Master, we shall go Always a little further: it may be beyond that last blue mountain barred with snow, Across that angry or that glimmering sea.
Reply With Quote
  #52  
Old 16 May 2010
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
Quote:
Originally Posted by Selous View Post
there is a guy on the GS Forum who makes his own box's & racks, suggest you run a search on there. contact him
There's four on UKGS'er:

Vern who makes the "Worldbeater" ally panniers which seem to strong & held in high regard.

There's also Civil in N. Ireland who makes the "Caja Sahel" panniers.

Redcap makes basic well priced ally boxes which fit to TT frames & take TT fittings.

There's also Stahlkoffer who I think are based in the Midlands, they have a website.

The Caja Sahels are a bolt on fitment, not sure about the others though?
__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #53  
Old 16 May 2010
Gold Member
Veteran HUBBer
 
Join Date: Mar 2008
Location: BeaulyScotland
Posts: 145
Excuse my ignorance but ?

I am well impressed with peoples knowledge regarding the building of racks for panniers. I have currently got a fabricator working on building a frame for an xt 250 Serow - he is making a great job of it so far and incorporating some of the ideas used here - e.g. tool roll/ spare fuel can etc. I have noticed that ALL the racks on here and the "off the shelf" racks have a bar across the back under the number plate - is this essential ? - the rack he has built so far is fixed to a rear rack - I don't wish to cut corners but this guys bill for labour is mounting up and the material costs are also increasing - what does this bar do ? - is it to prevent bending if the bike is dropped ? or does it have a more significant structural purpose - any replies gratefully received

Chizz
Reply With Quote
  #54  
Old 16 May 2010
Registered Users
Veteran HUBBer
 
Join Date: Apr 2005
Location: Oxford UK
Posts: 2,102
The reason for the bar across the back is to link the two sides together so they form a kind of box structure with the subframe rails and the vertical pannier mounting loops. Without it the boxes can flex in and out and eventually something will fracture.

Ideally you'd put the link bar straight between the boxes but in most bikes the wheel is in the way so it tends to be a bent version that goes round the back of the tyre.
Reply With Quote
  #55  
Old 16 May 2010
Gold Member
Veteran HUBBer
 
Join Date: Mar 2008
Location: BeaulyScotland
Posts: 145
Back of Beyond

Thanks for that - it makes a lot of sense - think I just need to be prepared to spend a little more time/money

Chizz
Reply With Quote
  #56  
Old 16 May 2010
Registered Users
Veteran HUBBer
 
Join Date: May 2006
Location: Bribie Island Australia
Posts: 678
Quote:
Originally Posted by Chizz View Post
what does this bar do ? - is it to prevent bending if the bike is dropped ? or does it have a more significant structural purpose - any replies gratefully received

Chizz
Just triangulates/boxes the frames - I've had Krauser and (have) BMW 3 point pannier frames and a Japanese lookalike system and all needed to be cross braced to stop the welds/bends from cracking. Even then we run straps around the panniers and over the seat to provide additional lift and support (think Playtex).

By cross bracing the frames you very effectively counter the considerable forces trying to push the panniers onto the bikes centre line. Simple example is a cardboard box open at one end - it collapses really easily. Put a brace in the open end and it remains strong.
Reply With Quote
  #57  
Old 16 May 2010
Registered Users
Veteran HUBBer
 
Join Date: Jul 2007
Location: Dreaming of travelling and riding bikes in general..
Posts: 445
I was thinking about this rear loop. From my experience, non-crash failures almost always occur with the rear loop. If you move the connecting-member (i.e. a straight version of the rear loop) that goes from the one pannier to the other further up (vertically) the pannier frame, so that it joins halfway up each side then you may be able to get away with a straight member.

I did this on an africa twin when the mule rack failed in Congo (using a strut from a folding picnic chair) and it is suprising how much more effective and efficient a straight joining-member is. The problem is the rear wheel travel being in the way. Food for thought anyway.
__________________
Find out details of my 2011 trip to Siberia on a lightweight dirtbike:
www.brighton2expeditions.co.uk
Reply With Quote
  #58  
Old 16 May 2010
Moderator, Contributing Member
Veteran HUBBer
 
Join Date: Sep 2005
Location: Lancashire England
Posts: 313
Quote:
Originally Posted by Chizz View Post
I am well impressed with peoples knowledge regarding the building of racks for panniers. I have currently got a fabricator working on building a frame for an xt 250 Serow - he is making a great job of it so far and incorporating some of the ideas used here - e.g. tool roll/ spare fuel can etc. I have noticed that ALL the racks on here and the "off the shelf" racks have a bar across the back under the number plate - is this essential ? - the rack he has built so far is fixed to a rear rack - I don't wish to cut corners but this guys bill for labour is mounting up and the material costs are also increasing - what does this bar do ? - is it to prevent bending if the bike is dropped ? or does it have a more significant structural purpose - any replies gratefully received

Chizz
Hi Chizz,

any photo's of the project so far?

Regards

Reggie
Reply With Quote
  #59  
Old 16 May 2010
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
Bike now blue to match the Clarke tank, swapped panels with the other DRZ. Fitted fender brace, lowered seat and lowering links, pannier frames back from being sandblasted and powdercoated. Also made protection plates for the clutch, generator & starter motor covers from 2.5mm aluminium plate.









To do soon: fit rad guards, cut foam out of the original seat, modify Ortlieb panniers.

To do before start of trip: new tyres, chain, sprockets, new stainless countershaft spacer, oilseal & O'ring, check valve clearances, new pads front & rear, purchase Wolfman tank bag & tank panniers, fit aluminium plate to rear rack.

All pics here: DRZ PANNIER FRAMES - Steve's Photos
__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #60  
Old 16 May 2010
Gold Member
Veteran HUBBer
 
Join Date: Mar 2008
Location: BeaulyScotland
Posts: 145
no pics yet

Sorry Reggie no pics yet - bike still away - hopefully will be complete in time for Ripley - although may have to paint in the short term - shortage of powder coaters in the Highlands

Chizz
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 2 (0 Registered Users and/or Members and 2 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Luggage Rack BuzzBum Yamaha Tech 3 3 Oct 2008 23:58
H&B Luggage Rack IanW KTM Tech 1 8 Nov 2003 17:43
Luggage Rack XR 600 XR Max 600 Equipping the Bike - what's the best gear? 2 20 Feb 2003 22:49
luggage rack Kurt Ellul Honda Tech 1 22 Jan 2003 03:15
luggage rack Kurt Ellul Equipping the Bike - what's the best gear? 1 21 Jan 2003 23:44

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 19:08.