Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Equipping the Bike - what's the best gear?
Equipping the Bike - what's the best gear? Anything to do with the bikes equipment, saddlebags, etc. Questions on repairs and maintenance of the bike itself belong in the Brand Specific Tech Forums.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Like Tree5Likes

Reply
 
LinkBack Thread Tools Display Modes
  #31  
Old 13 Nov 2008
Alexlebrit's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2006
Location: West London
Posts: 920
A bit off the wall

Well I've taken the advice and gone for round tubing, but I've been looking again at the "legs' that attach it to the bike. A lot of commercial ones are flat steel - despite what people have said on here, and I can see loads of advantages to it, it's easy to weld it to round tubing, and it gives a flat surface to bolt through.

So is it that bad?
__________________
Happiness has 125 cc
Reply With Quote
  #32  
Old 13 Nov 2008
Redboots's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Location: On the border - NE FR
Posts: 865
Quote:
Originally Posted by Alexlebrit View Post
Well I've taken the advice and gone for round tubing
Well, I reckon you have been given duff advice.

Round us stronger than square under TORSION
Square is stronger than round under BEND
Flat is just pants imho.

Make the racks so that the bottom is a cradle to sit the pannier in. Like the Overland Solutions racks.
Making the racks from square will also simplify the attachment of a mechanism to lock the pannier in place

My 2 bobs...

John
__________________
Nostradamus Ate My Hamster
Reply With Quote
  #33  
Old 13 Nov 2008
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
Jesse makes the rack of square tubing and they brake all the time, I have round tubing now and will not go back:
Reply With Quote
  #34  
Old 13 Nov 2008
Redboots's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Location: On the border - NE FR
Posts: 865
Quote:
Originally Posted by AliBaba View Post
Jesse makes the rack of square tubing and they brake all the time, I have round tubing now and will not go back:
Ah-ha... but that aint your average diameter of rack tube, nor the crap mount points they usually have. Self made?

John
__________________
Nostradamus Ate My Hamster
Reply With Quote
  #35  
Old 13 Nov 2008
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
Quote:
Originally Posted by Redboots View Post
Ah-ha... but that aint your average diameter of rack tube, nor the crap mount points they usually have. Self made?

John
Sadly I’m not able to weld, I just took part in the design-process.
Reply With Quote
  #36  
Old 13 Nov 2008
Redboots's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Location: On the border - NE FR
Posts: 865
Quote:
Originally Posted by AliBaba View Post
Sadly I’m not able to weld, I just took part in the design-process.
Looks good. Panniers bolted through the back?

I use a Tesch rack, (square), that's had bits "added", like a small cradle to sit the pannier on and then use a couple of stainless wing-bolts with 50mm stainless washers on them that screw into "rivnuts" (if you know what they are), that are mounted onto a brace in the corners of the frame.
I'm not particularly interested in "Quick Detachable" as it also equates to "Quickly Stolen

John
__________________
Nostradamus Ate My Hamster
Reply With Quote
  #37  
Old 13 Nov 2008
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
Quote:
Originally Posted by Redboots View Post
Looks good. Panniers bolted through the back?

Thanks!

Yes the panniers are bolted, you can see the two holes for the bolts high up at left and right side. The panniers rests on the two “steel-mushrooms“ at the bottom and four rubber parts kill the vibration.

I have also tested various “Quick Detachable” solutions and have found them to be rather “Auto Detachable”. For me it’s not a problem to unscrew the two bolts to get the pannier of, I seldom do it anyway.
Reply With Quote
  #38  
Old 8 Mar 2009
Gold Member
Veteran HUBBer
 
Join Date: Nov 2005
Location: Wells, Somerset
Posts: 233
Just finished mine :-)

I used 20x20x2.5 SHS, and I think 30x6 flat black, and a bit of weld-mesh.
Powdercoated satin black.

Just in the nick of time too. I'll still have the burns from welding when I leave, RTW with a bit of luck.

Bike is a Honda XR650L 2008.

Also made the aluminium panniers shown in last photo. This pannier & frame project was a HUGE undertaking, mostly because of the way I wanted to do it.

Total width of the bike/panniers is now 990mm, which is only about 40mm wider each side, compared to the bars.

I'm in the process of doing a website, which will detail the whole bike prep project.







Reply With Quote
  #39  
Old 6 Jun 2009
Registered Users
New on the HUBB
 
Join Date: May 2009
Location: Tokyo, Japan
Posts: 13
Making a luggage rack while on the road

While in Laos, I was having a problem with a sagging duffle bag, so I made my own rack for super cheap. Here is an illustration.

I just bought a cheap metal shelf (has plastic coating) for about $5, then I used some zip ties to secure it to the bike's back rack. This worked well! Preferably I'd have found some bolts with some thick rubber washers and some wide metal washers. Next time..



Hope this helps. I have more junk like this on my website.

Chris
Chris' Trans-Continental Motorcycle Adventures
Reply With Quote
  #40  
Old 6 Jun 2009
Registered Users
Veteran HUBBer
 
Join Date: Jul 2007
Location: Saintfield N Ireland
Posts: 148
Was just think (i know its not good) what about getting a shopping trolley and cutting it up to make the rack. It means you get a mesh that will stop your soft panniers from folding in and would also then allow you a load of points to hook your bungee cords to. Also if you plan on taking hard panniers, your rack plate also has a load of differnt places to connect on to.

Also at most its gonna cost you a pound for the trolley which im sure you could get back some how.
Reply With Quote
  #41  
Old 3 May 2010
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
Posted this recently in the Suzuki Tech section. The hardest part, IMO, of making pannier frames is fabricating the loops, hence us buying a set of used Givi frames which I then used as a starting point. I didn't have a tube bender, instead I bent the tubes around the MiG welder gas bottle in the vice. I've not been taught to weld (& don't consider myself good at it) but am able to securely join a few pieces of steel together. Cheap MiG's are easily available, I'd recommend that anyone buy one & have a go, just remember to wear the appropriate gear: welding gloves, mask (auto-darkening mask makes things so easy), coveralls & decent footwear (having dropped weld splatter on to my partners sandal wearing foot, this is a must ). Also expose as little skin area to the UV light as possible unless you're in to instant suntans. If welding anything that's zinc plated, remove the zinc first, the fumes are not pleasant if you don't. Make sure you buy a MiG with a non-live torch i.e. it's only live when you pull the trigger.

"Just finished building these pannier frames for my partners DRZ in preparation for her trip to South America starting mid-August:









Few more here: DRZ PANNIER FRAMES - Steve's Photos

Started with the Suzuki rear rack and a pair of Givi pannier racks for an airhead GS:



Once I removed all the bracketry, I wrapped some 3mm x 25mm steel bar around the 5 litre fuel can before welding. Once I'd mounted the right hand loop, I lined up the left hand loop before mounting it. I could have kept the width down by locating the frames more rearwards but wanted to keep the centre of the frames in line with the rear wheel spindle. The two main mounts on each side are made from steel tube, 16mm OD with a 1.5mm wall thickness with 10mm stainless capheads passing through, secured with Nylocs. I then turned down some steel bar to match the internal diameter of the 16mm tube & then drilled 8mm holes through. In to 20mm sections of tube, I welded 5mm lengths of drill steel bar. Four of these provided the mountings for the mounts on the footpegs & the frame on to which I'd already welded a 6mm thick lug. By mounting to the frame itself, I've used the pannier frames to brace the subframe. Stainless 8mm capheads slid easily in to the front mounts.

I also incorporated a Tooltube for Tyre Levers etc, a bolt through the cap plus an O'ring will prevent the cap coming loose. The final part was the rear brace, 16mm tube used once again in conjunction with 10mm stainless capheads.

The Givi frames cost £50 & I reckon I spent another £50 on 3 metres of steel tube, flat bar, welding gas & wire plus stainless bolts. So far I've spent between 30 & 35 hours on them, they still need to be removed, blasted & powdercoated. They'll be fitted with waterproof Ortlieb panniers. Total width is very slightly wider than I'd like but the weight distribution is much better for it. She'll be riding away from the cities, mainly in Argentina & Chile so width is not that big a deal as she won't be filtering through heavy traffic.

We'll be fitting blue bodywork from the other DRZ plus a Clarke tank, rad guards, Wolfman tankpanniers & tankbag plus a front mudguard brace. I've already fitted Talon lowering links & 'bar risers to allow the forks to be pushed through by 20mm. Rear preload is on max at present which is why it doesn't look that low. Once new chain & sprockets, pads & more suitable tyres are fitted, it will be pretty much ready to go.

Thanks to Louisdut for the idea for the additional can."
__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #42  
Old 5 May 2010
Moderator, Contributing Member
Veteran HUBBer
 
Join Date: Sep 2005
Location: Lancashire England
Posts: 313
Hi Steve,

I've just got myself a set of Hepco & Becker mounts, from a Bandit, to persuade to fit my XT225.

I really like the idea of the 5 litre fuel cell. Where did you source it?

Regards

Reggie
Reply With Quote
  #43  
Old 5 May 2010
Capo Sakke's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2008
Location: Creator of Joroinen Community Finland / All Oceans
Posts: 219
Thats how I did it. Use 2,5 mm Alloy plate. Remove orginal rack to take new 3 cm down and get better center of gravity. Use pillon peg as a one support point to get better center of gravity.



An that how it look's on "Shake down"
__________________
...You know it's a bit windy when you get passed by your own dust...
Reply With Quote
  #44  
Old 5 May 2010
Moderator, Contributing Member
Veteran HUBBer
 
Join Date: Sep 2005
Location: Lancashire England
Posts: 313
Hi Capo Sakke,

what an interesting idea.

Regards

Reggie
Reply With Quote
  #45  
Old 5 May 2010
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
Quote:
Originally Posted by The Cameraman View Post
Hi Steve,

I've just got myself a set of Hepco & Becker mounts, from a Bandit, to persuade to fit my XT225.

I really like the idea of the 5 litre fuel cell. Where did you source it?

Regards

Reggie
Here you go:

Ocean Slim Tank - Fuel, General Chandlery | Mailspeed Marine

They also do a cheaper version in white for water only. Cap's aren't lockable, we might just roll some duct tape around it to keep it secure on bumpy roads.
__________________
My photos: www.possu.smugmug.com
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 3 (0 Registered Users and/or Members and 3 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Luggage Rack BuzzBum Yamaha Tech 3 3 Oct 2008 23:58
H&B Luggage Rack IanW KTM Tech 1 8 Nov 2003 17:43
Luggage Rack XR 600 XR Max 600 Equipping the Bike - what's the best gear? 2 20 Feb 2003 22:49
luggage rack Kurt Ellul Honda Tech 1 22 Jan 2003 03:15
luggage rack Kurt Ellul Equipping the Bike - what's the best gear? 1 21 Jan 2003 23:44

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 08:47.