Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Equipping the Bike - what's the best gear?
Equipping the Bike - what's the best gear? Anything to do with the bikes equipment, saddlebags, etc. Questions on repairs and maintenance of the bike itself belong in the Brand Specific Tech Forums.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Like Tree9Likes

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11 Nov 2013
maria41's Avatar
The franglais-riders
Veteran HUBBer
 
Join Date: Jul 2005
Location: UK
Posts: 1,175
DIY frame for soft panniers?

Hi,

We just got a couple of Honda XR125L from eBay. We will travel with soft panniers and I am looking into some supporting frame for those. I could not find anything on the market for that. I have Andy Strapz bags, and my husband will have probably the Ortlieb.

Any DIY suggestions? We may be able get some copper pipes from B&Q and do some soldering. But ideas welcome!

Just need something to fix the soft panniers so they stay away from the exhaust on one side, and don’t flap around once we hit the corrugation and tough roads in the Stans and Mongolia…….

suggestions and ideas welcome
__________________
Maria

www.franglais-riders.com
Reply With Quote
  #2  
Old 11 Nov 2013
Registered Users
HUBB regular
 
Join Date: May 2007
Location: Victoria, Australia
Posts: 80
DIY Frame

Hi Maria,

I was in the same predicament. Rather than copper tubing which might be a little too soft. I used some steel bar. It works fine and I don't think it's any heavier than a lot of the tube ones I've seen or used, and certainly easier to bend and shape. Just need to find someone with some basic welding skills.

Maybe see you on the road in Mongolia next August?

Chris
Attached Thumbnails
DIY frame for soft panniers?-pannier-frame-1.jpg  

DIY frame for soft panniers?-pannier-frame-2.jpg  

Reply With Quote
  #3  
Old 11 Nov 2013
lynch180's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: May 2011
Location: Ireland.
Posts: 112
Rebar and a welder are a good idea
Reply With Quote
  #4  
Old 11 Nov 2013
maria41's Avatar
The franglais-riders
Veteran HUBBer
 
Join Date: Jul 2005
Location: UK
Posts: 1,175
Chrispy,
Thanks for the pictures. We will look at steel. Might be more complicated.
We don't want to spend too much on the bikes. If something goes badly wrong with a bike, we want the option of ditching it. I've learnt my lesson on that!

You riding from Oz to Mongolia?
I would expect, with visas limitations, to cross the border from Russia to Mongolia around late July.
Maybe see you on the road.
__________________
Maria

www.franglais-riders.com
Reply With Quote
  #5  
Old 11 Nov 2013
Registered Users
HUBB regular
 
Join Date: May 2007
Location: Victoria, Australia
Posts: 80
Hi Maria,

No we're not riding from here. A mate and I have 660 Tenere's already sitting in Birmingham ready to go.

We are leaving from Paris where my wife lives on 30th May, and riding through to Russia, in and out of Mongolia and through to Magadan by late August.

Good luck with the frames and see you on the road.

Chris
Reply With Quote
  #6  
Old 11 Nov 2013
Registered Users
Veteran HUBBer
 
Join Date: Aug 2005
Location: Calgary AB
Posts: 1,032
Don't use copper. Plumbers user it because it's weak. Minimum half inch steel tubing which you can bend with a bench bender but won't withstand big hits either. You can hire a MIG welder and tack it to get welded properly later but I think you're much better off selling the Andy bags for a giant loop coyote.

Poorly made racks will crack. Better to not have a rack at all. Every kilo counts on a tiny bike particularly on single and double trails.
__________________
Tacos Tyring Travels.com
Reply With Quote
  #7  
Old 11 Nov 2013
Registered Users
Veteran HUBBer
 
Join Date: Aug 2012
Location: Australia
Posts: 1,131
Quote:
Originally Posted by tmotten View Post
Don't use copper. Plumbers user it because it's weak.
Err they use it because it is compatible with drinking water. I'd not use copper because it is expensive and heavy.

=================
You have two extremes -

One that is strong and won't bend. The bike could break first.

One that is bendable - if you fall on it and it bends, you can bend it back easily.

---------------------
Go for both ... have a weak point or two where it will bend. Bits that bend frequently will eventually break. So carry spares for that bit or have that bit a 'common' part available everywhere (a small bolt for example).
Reply With Quote
  #8  
Old 12 Nov 2013
Registered Users
Veteran HUBBer
 
Join Date: Aug 2005
Location: Calgary AB
Posts: 1,032
It's a very malleable material that's compatible with potable water. You can't always get somewhere with set shaped fittings so having a simple hand bender gives them a way of getting something that works without cracking.

Making your own rack is a pretty big undertaking particularly when a reckless alternative is available. There are others as well besides giant loop that offer this. They are all designed with tough terrain and as little impact on a bike as possible which is which fits this trip.
__________________
Tacos Tyring Travels.com
Reply With Quote
  #9  
Old 12 Nov 2013
chris's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Jun 2000
Location: GOC
Posts: 3,326
Also consider flat steel as pictured in the rear/second bike. The first bike rack design needed modifying because the pannier pushed on the plastic panel which sat on the exhaust and everything got rather hot. The other bike's design (my bike) with the extra strut around the side panel worked great.

The bike and rack is located in West Yorkshire if you want to drop in and have a look.

Reply With Quote
  #10  
Old 12 Nov 2013
Alexlebrit's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2006
Location: West London
Posts: 920
Two years ago I was faced with much the same problem, needing a support for my panniers and having skills to make one. So I made this.



Which you read all about HERE.

It's stainless steel threaded rod inside fuel line bent up in a vice. Yes it could bend in a crash but it'll bend back and strangely it hasn't bent yet despite having the full weight of the bike resting on it.

The whole thing cost €10 and an hour or two to make.
__________________
Happiness has 125 cc
Reply With Quote
  #11  
Old 12 Nov 2013
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Maria.

Don't use copper. It's far too soft. And solder is too brittle. It's not structural.

Steel is your friend here. It's cheap and available in countless shapes and sizes. Plastikote spray paint will stop it rusting.

It's a shame you're not closer to me. I'd of let you come to my workshop and I would of welded them up for you with all my posh new welding equipment.

back in 2009, I used flat bar for my racks which lasted me all through Africa and lots of tumbles. I over engineered them.

If you're determined to do it yourself and don't want the hasel of bending tube then I suggest buying some Mild steel flat bar (also known as black steel). DON'T by bright steel. It's too brittle.

Look at about 30mm - 40mm wide and 3mm thick. You can buy a 'length' for about £20 which is 7m long

look at my DRZ prep page on my website for some pictures of mine. I made those in 2009 before I knew how to weld. Using a £30 welder and some scrap flat bar which was way too thick.. 5mm I think. TOO THICK.

They took me about an hour to make using a vice and a hammer and a propane torch.. They look SHIT but were stronger than the subframe of my bike haha.

Let me know if you need anymore help. I'm doing LOTS of fabrication at the moment.


Here's one picture. I'm ashamed to share it due to the poor quality of manufacture. However, I did make them in an hour out of scrap metal whilst enjoying a s lol

__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #12  
Old 13 Nov 2013
maria41's Avatar
The franglais-riders
Veteran HUBBer
 
Join Date: Jul 2005
Location: UK
Posts: 1,175
hi guys,
Thanks for all the advice.
What Alexlebrit did seems very simple and ideal for our needs. I like it!
I still need to pick up my bike this saturday . Well, Alistair will, while I get to the London mini meet! Division of labour!

But we need still to try the panniers on the bikes before we decide anything. I like the idea of a single metal bar like Alex'.

The saddles bags won't need any support as such. I travelled with my bags on my Versys, without using a frame, and it was ok. But a bit too near to the back wheel. And the exhaust is under the belly on the V.

So for the Honda XR we need to measure. Also Alistair needs to get his travel saddle bags. Still hesitate. The Ortliebs are good contenders. Xmas present sorted

Ted, shame you're so far!
__________________
Maria

www.franglais-riders.com
Reply With Quote
  #13  
Old 13 Nov 2013
Alexlebrit's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2006
Location: West London
Posts: 920
Maria, hopefully I'll see you on Saturday with your new bike although sadly not with my poor not working one. Like you say it's not about hanging the panniers off a rack just stopping them flapping or resting on things they shouldn't which means things don't have to be overbuilt.

I tend to think the hardest part is actually finding a way to attach the supports to the bike hopefully a bit of staring and prodding will reveal something.
__________________
Happiness has 125 cc
Reply With Quote
  #14  
Old 14 Nov 2013
Registered Users
Veteran HUBBer
 
Join Date: Jul 2012
Location: Idaho
Posts: 163
cycle gear has some ajustable bag racks,really intended for baggers but only 25 us right now.
Reply With Quote
  #15  
Old 15 Nov 2013
Registered Users
Veteran HUBBer
 
Join Date: Apr 2005
Location: Oxford UK
Posts: 2,102
Hi Maria

As others have said don't use copper piping but you can get thin walled steel tubing as well from B&Q and I've made loads of racks from it. It's a little tricky to weld as it needs some care not to burn through but you do end up with a light rack - something important with a 125. I made something similar for my 125 Suzuki last year using it and they're about 250gms each side - picture below

The issue of welding is tricky if you don't have the equipment / skills to do it yourself. Trying to find a commercial welder (in my part of the UK anyway) to take on a one off bike rack project is just about impossible - from their perspective it's fiddly, low profit margin and subject to constant changes when they're asked to tack on an extra bracket here or move this fixing point there etc. You can hire a MIG welder easy enough and it's not that hard to use it but a rack you're going to depend on day in day out probably isn't the best starter project as a bit of experience does help asess whether welds will break etc. If you know someone someone who can do it at "hobby" rates it's definately the way to go though.

Ted's steel strip, hammer and vice option is the alternative but you probably don't need to use old railways lines like he did - B&Q also do 20mm x 2mm steel strip that would be fine. You can drill and bolt something together out of it but you do run the risk of it all vibrating undone - usually at the top of a mountain or somewhere awkward - ask me how I know!

If you're really stuck I'm happy to do what I can to help - I don't have Ted's equipment or expertise but if Oxford(ish) is closer than his neck of the woods then pm me.

Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
not all those who wander are lost | two earthlings ride around the world Rockwell Ride Tales 84 7 Dec 2014 14:23
VIN number on frame botched JustMe Trip Paperwork 18 13 Jun 2013 22:14
Hard vs Soft Luggage - Our Metal Mule and Enduristan Review and Solution Pheebs Equipment Reviews 0 9 Feb 2013 09:18
F800GS Jesse Luggage Panniers and Top Box - For sale, Newcastle UK todderz TRAVEL Equipment for Sale / Wanted 2 8 Jan 2013 15:48
Metal Mule 38l Max panniers + frame for F650GS/G650GS in France/Switzerland kickaha TRAVEL Equipment for Sale / Wanted 1 19 Nov 2012 20:50

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 19:02.