Go Back   Horizons Unlimited - The HUBB > Equipment, Travel > Equipment Reviews
Equipment Reviews Post YOUR REVIEWS of ANY Motorcycle, Camping or Travel Equipment and accessories. Tell us what worked and didn't work for you!
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #31  
Old 14 Nov 2007
Gold Member
Veteran HUBBer
 
Join Date: Apr 2007
Location: England
Posts: 277
'...if you're handy...install a simple two way, hi-low switch. A reostat is just not needed for heated grips. The Low-High is more than enough IMO. Simple and cheap to repair too!'

Ah, oh...I see the problem. Yeah, not so handy. There is a reason why I have enlisted a qualified and certified engineer to come with me on my travels! I've pretended he is my best mate for a reason- I couldn't fix a length of string.

I will have him follow out your directions and see if he can resurrect the beast!

Or I may just get some of the new ones with that better switch arrangement.

Birdy Logic - If you can buy a new one, don't bother fixing it!

I'm shit.

Happy Riding.
Reply With Quote
  #32  
Old 15 Nov 2007
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,822
Bar Muffs are a great Idea!!
__________________
Patrick passed Dec 2018. RIP Patrick!

Last edited by mollydog; 23 Mar 2009 at 07:13.
Reply With Quote
  #33  
Old 18 Nov 2007
Registered Users
New on the HUBB
 
Join Date: Nov 2007
Location: UK
Posts: 4
Quote:
Originally Posted by mollydog View Post
The Symtec's specify one element for one side or the other. The Throttle tube is PLASTIC, it can melt in some cases. Wrap one layer of electrical tape only.

Clutch side: Wrap two layers of electrical tape. If you use too much tape the grip will feel "fat". Thin, high quality, pliable grips are best here. Not foam ones
or rock hard ones. Neither work well with heated grips.

NOTE: The steel clutch side (heat sink) will always take longer to heat up. Normal.
I've seen a lot of this information regarding handlebar insulation on various forums, and would like to offer my take.

It's just not needed.

Personally, I've had 4 sets of Symtecs on different bikes, and currently fitted to two of my own bikes. Between my mate and myself, I guess we've fitted over a dozen or so sets to various mates bikes. Of 20 odd off roaders out in the Peak District yesterday I think about half were running Symtecs with the other half wishing they were by 3 o'clock

The Symtecs run a hotter heating element on the clutch side to compensate for the heat loss into the bar, which is why they are marked for clutch and throttle sides. I have never insulated a throttle tube, and know of no-one that has, or has had one melt, even after continuous all day running.

I insulated the clutch side on the first set I fitted, but haven't bothered since. The difference is only really noticeable in the first 5 minutes of start up from cold, when the right side does warm slightly quicker, the rest of the day you don't notice.

I believe all the insulation talk on various forums stemmed from fitting of the Enduro Engineering grip kits, which are similar, but run the same rated elements both sides, and regulate the hi - lo settings through a resisted switch. This arrangement will always result in the right side running hotter than the left, hence the need for insulation on the clutchs ide.

With the different rated elements for left and right, the Symtecs just don't need it, and thinking logically, if a heater element can melt a nylon throttle tube, then one wrap of electrical tape isn't really going to prevent much.
Reply With Quote
  #34  
Old 18 Nov 2007
mollydog's Avatar
R.I.P.
Veteran HUBBer
 
Join Date: Aug 2003
Location: california
Posts: 3,822
Also, it's OK to use grip glue right
__________________
Patrick passed Dec 2018. RIP Patrick!

Last edited by mollydog; 23 Mar 2009 at 07:14.
Reply With Quote
  #35  
Old 19 Nov 2007
Registered Users
New on the HUBB
 
Join Date: Nov 2007
Location: UK
Posts: 4
Quote:
Originally Posted by mollydog View Post
BTW, the Enduro Engineering (W.E.R.) is basically the same kit in a different package with a few changes, mostly a bit of markup on the price.

Don't know if there are two Enduro Engineering's but the one's I've seen here in the UK are quite different to the Symtecs. A wider single heating element in both sides, with both sides rated the same as in the ATV / Snowmobile kits, and the hi / lo regulated by a resisted switch. Not like the Symtec kits at all, a few friends have had the switches fail in these.
Reply With Quote
  #36  
Old 22 Nov 2007
Crusty's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2007
Location: Herts, UK
Posts: 215
Oxford it is...

Hi all,

my Oxford heated grips arrived today!

I got them off ebay for £40.00 inc postage so not too bad, can't wait to get them fitted and try them out.

Thanks for the assistance, I'll post a review when I've used them for a bit.

Cheers.
__________________
Beware the dark, mechanical bird.
Reply With Quote
  #37  
Old 17 Dec 2007
Crusty's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2007
Location: Herts, UK
Posts: 215
I've been using my Oxford grips for a while now and I can honestly say they are brilliant!

Fitting was a doddle. The kit includes a bracket with pre-drilled holes that match up to the clutch/brake lever mounting (they did on my TA anyway) meaning the control unit can be easily reached with a gloved thumb whilst riding. An adhesive pad is also included to stick the unit to your fairing if you prefer.

They heat up from cold in a few minutes & I can't tell any difference between sides. The max setting (of four) is HOT! I find them Warm on No3, adequate on No2 & just noticeable on No1. That was based on yesterdays admittedly short ride, but the temperature was around freezing, not including wind chill.

The actual grips are quite chunky and do have a pronouced ridge at the end but neither have caused me problems. Time will tell how durable & weatherproof they are but they look and feel like quality items, as does the control unit.

I did notice how cold the backs of my hands were in comparison and likewise the brake and clutch levers!

All in all I'm well pleased, it makes a big difference to be able to feel your fingers and it follows that your ability to control the bike has to be better, something that's nearly caught me out in the past.

I'd recommend them to everyone!

Cheers all.
__________________
Beware the dark, mechanical bird.
Reply With Quote
  #38  
Old 17 Dec 2007
Registered Users
HUBB regular
 
Join Date: Jul 2006
Location: N.E.Essex
Posts: 37
Hi all, I used to do courier work and wouldn't be without my heated grips and have been using them for over 12years now. Used in conjunction with handlebar muffs is a superb way to survive the winter months in the UK, not your current USA weather!!!
I usually take the feed from the live side of my horn circuit with a piggyback blade connector, but check for suitable fuse and wire thickness first.
I'm currently running grips at 1 or 4 amps, plus twin horns on the same circuit and it is switched on/off with ignition.

Cheers, Richard.

MERRY CHRISTMAS to you all.
Reply With Quote
  #39  
Old 18 Dec 2007
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
Quote:
Originally Posted by Crusty View Post
I've been using my Oxford grips for a while now and I can honestly say they are brilliant!

Fitting was a doddle. The kit includes a bracket with pre-drilled holes that match up to the clutch/brake lever mounting (they did on my TA anyway) meaning the control unit can be easily reached with a gloved thumb whilst riding. An adhesive pad is also included to stick the unit to your fairing if you prefer.

They heat up from cold in a few minutes & I can't tell any difference between sides. The max setting (of four) is HOT! I find them Warm on No3, adequate on No2 & just noticeable on No1. That was based on yesterdays admittedly short ride, but the temperature was around freezing, not including wind chill.

The actual grips are quite chunky and do have a pronouced ridge at the end but neither have caused me problems. Time will tell how durable & weatherproof they are but they look and feel like quality items, as does the control unit.

I did notice how cold the backs of my hands were in comparison and likewise the brake and clutch levers!

All in all I'm well pleased, it makes a big difference to be able to feel your fingers and it follows that your ability to control the bike has to be better, something that's nearly caught me out in the past.

I'd recommend them to everyone!

Cheers all.
That ties in with my experience of the Oxford grips Crusty.
As you mention, now that is sorted the backs of the hands become the next consideration - will we ever be satisfied??!


As wobbly says, I am thinking about getting some handle bar muffs: they are not pretty, but who cares, they are easily added and taken off again when the weather improves; heated grips running inside them should need only a minimal heat setting. Also, thin gloves can be used which I much prefer for feel of the controls.
__________________
Dave
Reply With Quote
  #40  
Old 19 Dec 2007
royzx7r's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Mar 2007
Location: Liverpool UK
Posts: 225
I Have the latest oxford ones fitted, the control unit packed up on the first ride out with the grips stuck on full heat(not a good start).

I had to pull over on to the hard shoulder of the m6 and unplug them before my hands were fried.

At least they offer a no fuss 2year warranty with them now, so after the unit was replaced they have worked fine. I find the tips of my fingers still get cold but not enough to bother me.

I have only ever used them on the lowest setting and my hands are like toast. Overall, I cant belive that I did not get arround to fitting them sooner.


Roy
__________________
"Whats in that thing??", An R1 owner said.
Reply With Quote
  #41  
Old 19 Dec 2007
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
There's another vote for handlebar muffs in post no 11 here:-

http://www.horizonsunlimited.com/hub...e-winter-31739

Roy,
Such electronic things will probably fail very quickly or immediately, if they are to fail at all; once it is proven to work OK I reckon it should last for years - so, the 2 years warranty is reasonable IMO and a good deal compared with the earlier stuff based on rotary switches or similar.
__________________
Dave

Last edited by Walkabout; 20 Dec 2007 at 12:57.
Reply With Quote
  #42  
Old 20 Dec 2007
royzx7r's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Mar 2007
Location: Liverpool UK
Posts: 225
Sounds right m8, must of just had a duff one.


Just to add, on cold days I use them Two finger mitts that look daft but are so much better at keeping your fingers warm.

They look akward, but they are very easy to live with.
__________________
"Whats in that thing??", An R1 owner said.
Reply With Quote
  #43  
Old 20 Dec 2007
TDMalcolm's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2007
Location: norfolk uk
Posts: 140
Quote:
Originally Posted by royzx7r View Post
Sounds right m8, must of just had a duff one.


Just to add, on cold days I use them Two finger mitts that look daft but are so much better at keeping your fingers warm.

They look akward, but they are very easy to live with.
Hi Roy "n" guys, I use the two fingered gloves from HG, excellent at keeping the cold out, i don't find them awkward, couldn't get on with hbar muffs, potentionaly dangerous imo...
TDMalcolm
Reply With Quote
  #44  
Old 20 Dec 2007
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
Quote:
Originally Posted by TDMalcolm View Post
couldn't get on with hbar muffs, potentionaly dangerous imo...
TDMalcolm

Any particular experience for this TDM?
I can see that it could be difficult to get your hands back on the bars if you take them out of the muffs for any reason while on the move.
I just don't take my hands off the bars now that they are heated!
__________________
Dave
Reply With Quote
  #45  
Old 7 Jan 2008
(aka frgich) HUBB Advertiser, Supporter
Veteran HUBBer
 
Join Date: Dec 2007
Location: Zagreb, Croatia
Posts: 422
I've installed Daytona heating grips on my V strom. Works great, only thing is that You must put some tape under the left grip,to isolate the grip from the handlebar. Other than that, it's working very nice. It has two step heating switch, START and ON so when the grips are heated You just switch to ON mode and ride on
__________________
Bike purchase, storage, expedition tours / insurance, health & repatriation, transport, rally training
www.lobagola-mototours.com/ www.lobagola-insurance.com/
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Heated grips John Roberts BMW Tech 4 10 Sep 2008 13:17
Do F650 Heated Grips Differ from r1200gs H.g in performance Dino Y BMW Tech 5 31 Mar 2006 10:15
"heated" hand grips Pat Honda Tech 10 2 Jul 2004 04:39
Heated Grips / Muffs / Deflectors? black sheep Equipping the Bike - what's the best gear? 1 1 Apr 2004 01:15
Wrap around heated grips karter257 Equipping the Bike - what's the best gear? 8 22 Dec 2001 22:38

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 11:23.