The New Helmet Tests are Here at last!
 

Just to let you guy's and gal's know that the new UK SHARP helmet testing project is now (finally after a long long wait) live as from today -

About 30 test results have been put online. More will follow over the next few days (or weeks if the past is anything to go by).

SHARP - The Helmet Safety Scheme

More helmet results will come online in the next few days.

Damn! My top of the range Shoie X-Spirit only has 4 stars whereas some helmets costing much less have 5 stars! Well guys, there you have it, PRICE doesn't necessarily equate to best protection. As I have been saying for months on this forum, there will be a few red faces within the industry. What a laugh... Go out and get yourself a bargain helmet with 5 stars. It's official, it's no longer necessary to spend hundreds of pounds to get the best protection.

I could have saved myself £350 by buying a cheap £50 NITRO helmet which gets 4 stars too. :thumbdown:

These are the BEST Helmets that all get 5 stars out of 5 stars

AGV S.4
ARAI GR5x
Bell M1
HJC HQ1
LAZER LZ6
SHARK RSR2

ONE OF THE WORST HELMETS IS THE (WAIT FOR IT) - ARAI CONDOR COST £250

As I thought, These greedy lying bastards have been fleecing us all for years! Not one Shoei helmet gets 5 stars! :confused1:

I'm sure some of the smaller less well known and cheap manufactures will be most happy with the results. Many cheap £50 helmets get 4 stars!

THIS IS A UK GOVERNMENT FUNDED PROJECT BUT THE INFORMATION IS AVAILABLE TO ANYONE WHO WANTS IT.

I forcee quite a few redundancies and sackings at the Shoei head office! What a laugh... I think I'm entitled to say that after spending nearly £400 on a helmet which I was told provided the best level of protection.

How did you're helmet perform in these tests? Perhaps this thread can be used to discuss this project in detail and forum members can moan about the results...

Enjoy... SHARP - The Helmet Safety Scheme :clap:

How about comfort, ventilation, washable lining and other "small things" that were not tested? ;)

Your comment completely misses the point I am trying to make here!

You appear to be rubbishing these tests without any scientific evidence to back up your argument. These tests should be welcomed by all fair minded and intelligent bikers...

Are you really suggesting that a washable lining and ventilation is worth paying a extra £350?

I understand that these tests INCLUDE such important factors as COMFORT and VENTILATION as well as LEVELS OF PROTECTION.

I think if you look closely you will find many many cheaper helmets that are perfectly comfortable and also have a washable lining.

Why are so many people prepared to go out of their way to defend these large and powerful manufacturers who plainly have been taking the piss out of us all for years?

Sour Grapes?

You really are full of crap aren't you. Only 2 weeks ago you were bragging about buying this helmet for £100 at the BMF:

http://www.horizonsunlimited.com/hub...552#post191929

There's little new in these tests - they're just a variation on the existing European standards test with added emphasis on side impacts. The reason the Arai GPX scored well is that it's based on a car racing design which is stiffer in this area than their other helmets. Whether this added stiffness provides any additional protection in a real world crash was one of the reasons some manufacturers were questioning the testing methods.

I'm honestly not convinced that a group of academics in a lab with a test rig have a better understanding of what makes a good motorcycle helmet than the manufacturers with many years of real world data to work on.
How long have Shoei, Arai, X-Lite, etc been working on the design of their helmets? And how many times have you seen a racer wearing one of these helmets have a big crash and walk away from it?

These tests also take no account of things like fit, finish, comfort, ventilation, misting, parts backup and so on.
The reason I've always bought premium branded helmets is not because I believe they are safer - it's because they fit properly, and are comfortable. I want something I can wear for 12 hours a day without a problem.

I bought ANOTHER X-Spirit last week for my partner - Cost £385. At the time of the BMF, yes I did think I had a great bargain, but I know differently now don't I. I was talked into it by a Shoei salesman.

Less of the childish cheap and personal insults please. That was totally uncalled for...

Perhaps we should all listen to YOU and waste all our hard earned money? Why rubbish these tests, I simply don't understand you're logic...

Is there no one who agrees with me?

I suppose the obvious question is if a £50 helmet is as good or even better than a £400 helmet then why did you just buy the £400 one.:confused1:

You've started several threads on this subject over the last few months and you've repeatedly stated that premium branded helmets are just a marketing scam aimed at fleecing buyers of their money.
If, as you claim, these manufacturers are just taking the piss and not offering anything extra then why did you spend the money on one yourself?

The ECE22-05 norm, that is in force in the EU, is way too soft to really give any indication as to whether a helmet will actually protect you in a crash or not. In that test, a helmet is tested at practically walking speed, and from only specific places (thats why its legal to even sell helmets that have large ventilation holes all over, like a bicycle helmet - they know they will not be tested at those spots!)

I havent seen the test methods used by this SHARP-testing, so can someone please enlighten me, what is it, that makes their way of testing superior to anyone else (because thats the way the original poster does make it sound anyway)? If their testing is anywhere near the ´toughness´ of the 22-05, Im not convinced at all.

Money does not buy you safety straight away, agreed. But you wont get a very safe helmet very cheap, either. Neither will you normally get a very comfortable one very cheap.

It is also a fact that some of the more established manufacturers require their products to meet much tougher standards than just the ECE22-05.

The cheap, plastic ones may just barely meet that standard, but they may not protect in a big impact, if they will easily crack into two pieces, for example.

I recently read a test, where they found out that many of the cheapest options should never be used for motorbike riding, because obviously some of the manufacturers had sent better products into the tests, than they were actually selling! The tests showed highly dangerous, and possibly fatal G forces after impacts, that basically all helmets should be able to protect from. They were planning to test the helmets for several impacts, but couldnt because some of them cracked on first one.

All in all, this is a very complicated matter. Very hard for the average consumer to know, if a helmet is good or not, they all look about the same.

And naturally it is in the financial interest of the cheaper lids´ manufacturers, to claim that any helmet will do just fine. The same way it is in the interests of the more expensive ones, to claim that cheaper ones will not be enough.

I suppose I have more confidence in these tests than you. The reason why I decided to get a Shoei is that at the BMF my mates advised me it was a good bargain. The Mrs liked it and asked me to get her one. The tests came online TODAY. Yes I admit I do think that some £50 helmets are as good (and in some cases better) than more expensive alternatives. I relented and agreed to buy one on the basis that others (more experienced than me) confirmed the things were indeed worth the extra dosh. If I knew then what I know now I certainly wouldn't have bothered.

I try to encourage healthy discussion and debate about these things because thats the point of a superb forum like this one. Everyone has an opinion and I'm happy for anyone to disagree with me. What I object to strongly is cheap personal insults. I regret to say that is not always reciprocated. some people including it would appear you are adamant that they are right and that all these scientists are wrong. We all need to look at these tests with an open mind and try not to be too biggoted...

I rely upon the results of the tests which do tend to back up what I 've been saying for months now - that the most expensive helmets do not necessarily provide the highest level of protection.

Did I insult somebody somewhere.. if so, where was that?

I wouldnt be too worried about safety, when we´re talking about reasonably good-quality helmets. With fibreglass shell, reasonable weight, and firm strap-locking systems. When these things are ok, then there are other much more probable causes of injury and death in an accident.

I WOULD be worried, though, that in the EU it is fully legal to sell helmets that in fact can not give anywhere near the level of protection needed, if/when the machines are capable of exceeding 300 kms per hour. Some plastic jars, that will snap into half the moment they touch anything solid, simply should not have the approval for motorcycle use. And now they actually do.

Maybe it is too big a business to stop them being sold in the EU.

My comments were directed at Mark most definetely not you Pekka. Apologies if my post was confusing, I think our posts crossed and mine was placed behind yours.

Mark,
I remember when we last clashed - you're the fool that cheerfully bragged about riding your Honda Fireblade at 175 MPH on a public road! This explains a lot! I have nothing more to say to you and I suggest you go spread your nasty childish poison elsewhere...

Neil

I´d like to know, how exactly they do their testing at SHARP, and what are the basis of those 1-5 star ratings. There are SO many ways to test a helmet, that you can end up with very different results depending on what is tested, and how.

Once there was this test in an American magazine, where they found out that cheap, plastic-shell helmets were actually better in low-speed impacts, because they had more flex.

So they came into the conclusion that basically plastic-shell helmets are better.

They totally forgot whatever might happen with them, if you have an accident at higher speeds, where good protection will naturally be even more important, because impact forces are likely to be much higher.
So all in all the end-result was a big screw-up, because they just put one very important point of view aside totally, and didnt really even mention that.

That test smelled like someone had payed them to come into such conclusions.

And I personally do not buy the whole "flexing-theory" at all. I want a helmet that does not flex, but will absorb the energy, and spread it on a wider area, so that the force in one point will be lower. I dont believe my skull will "flex" at all in an impact, or at least it will not pop back into shape, like the plastic-shell helmet might do.

Just my 0.002 cents, and Im not an expert. But I do have a basic knowledge about the fundamental differences how a plastic shell, a fiber shell, and their respective linings, and the way they work in an impact, differ from each other.

I'd suggest considering just what a helmet does before looking for protection at 300 KPH. Forgetting important items like vision and comfort think about what they do in a crash.

Biker A falls off on a straight road at 300 kph with no other vehicle involved. He slides on his back for half a kilometer and stops in the middle of the road. In phyical terms he fell 2m (impact) then suffered considerable abrasion. He might walk away but all his gear will be toast.

Biker B has a similar impact but highsides. He flies through the air, landing on his face at 250 kph from a height of 5m at an angle. The impact is much higher the abrasion about the same. This guy is probably the argument for wearing race leathers. If he survives the impact the injuries will probably be treatable.

Biker C hits a car at 90 kph, goes over the bars into a parked truck. This collision is almost 100% impact. This guy might as well ride naked, nothing stops his brain getting mushed due to the massive deceleration.

Biker D hits a different car at 30 kph and dives over it into a kerb. The edge of the kerb gives a penetrating type blow. We have impact, penetration, deceleration and even some abrasion. If this guy takes the blow on a decent lid, has armour to survive the dive etc. he's hopefully alive.

You can test all the above in a lab. Tarmac at 300 kph can be simulated with a belt sander, an angled fall by striking the lid with a pedulum type hammer, the kerb type by a type of swinging axe. Different materials behave in different ways, but can be compared.

The bottom line though has another factor. Your brain is basically some mush in a bag of water. The bag is in a failrly stiff box, your skull in which there are various holes with soft plugs (eye sockets etc.). The skull is mounted on a flexible but easily damaged neck and spine. The types of impact, angles, surfaces, temperatures and a thousand and one other factors vary as do the ways in which you can be dead or horribly injured. The system is dynamically complex and variable from person to person. The tester has to standardise many factors to check one.

The helmet then needs to not only control penetration, it needs to try and control the resulting reactions. Imagine riding in a cast iron lid. Rider A would suffer burns as his iron helmet was heated by friction. Rider B would end up deaf from the noise if the weight of the thing didn't break his neck. Rider C is dead anyway as the deceleration will result in his brain hitting the inside of his skull. Rider D if he didn't get the broken neck from the swinging mass is actually not that bad off, plenty of Romans and Vikings took similar blows on this type of lid and survived. A leather helmet would have almost the opposite result although C is just as dead.

Deformation is useful in that it allows one material to act like another by applying the "attack" over a different/new surface. The axle is grabbed by the sides of it's blade, the belt sander is clogged with plastic dust. This is especially true where the protection is a compound type. Flexible but abrasion resistant plastic over impact absorbing foam is the current material of choice. The rest is fine detail. In comparing helmet designs you are looking at the fine few percentage of the protection. ECE/DOT tests etc. show you that your helmet is in the 80% range where zero is no helmet. I think they new star systems gives an indication of which are 75.5% and which are 84.5, but you'll never see the full picture for such complexity without studying millions of real world crashes. IMHO people need to take all the info in context rather than worry a 2-star will kill them by falling off it's shelf or think a 5-star makes them invincible.

I like the Star sytsem, in that it gives more detail which allows the better comparison, but isn't so complex as to blow your mind.

Andy

Andy,

You make some very interesting points as does Pekka. I believe that the SHARP website goes into quite fine detail regarding the tests carried out on each one of these helmets. My understanding is that these tests are the most stringent tests ever to be applied to M/C helmets. The whole project was backed by the British Department of Transport and as such is paid for by UK taxpayers. One would imagine that this site will be used extensively by anyone wishing to compare helmets. Not just in the UK but worldwide.

My opinion is that this new testing regime is to be welcomed by all motorcyclists who wish to make an informed decision when picking a safety helmet.

Of course there will always be those people who will rubbish the whole exercise based upon narrow minded and bigotted opinions.

It's always interesting to read constructive comments (including critisism) from people who clearly know what their talking about. :clap:

How to select a helmet
 

Fit and feel, strap, build quality, colour scheme visibility, ventilation. Is mostly what I look for.
I dont have a "Shoie" shaped head but Arai's fit good
If its sold in the EU, it must conform to certain standards and that will do.

I will be pretty useless in anything more than a 50kph impact that involves your head anyway.
So, 174mph? why not? It wont hurt for more than a split second at that speed:eek3:

John

Not trying to stir anything up
 

But from the SHARP Faq:
That, and the maximum simulated speed used was 8.4 m/s according to them, which is roughly 30kph by my math.



I guess it means take it all with a grain of salt.


Having tried on some of the less expensive options on the list, most of them felt like some sort of torture device to me. That, and I've personally crash tested one of the 3 star options on the track by low siding at ~140kph and bounced my head a few times. While my wife might argue with you, there's no permanent damage (or temporary after the fact)...

These tests are without any doubt the most stringent EVER applied to safety helmets and thats a FACT. I simply don't understand why some people have such a problem admitting they were WRONG!

SHARP is a UK government (Department of Transport) scheme paid for by the UK taxpayers. Are you really suggesting these government scientists don't know what they are doing???

The BIG boys in helmet manufacturing (Arai, Shoei) were involved in the concept and test regime from the start. It was only AFTER their products got a good slating that they raised doubts as to the effectiveness of the tests. It's "sour grapes" pure and simple...

The helmet makers that got good results are very happy with the test regime.

Sales of the £50 Lazer LZ6 have increased enormously since the SHARP tests were published.

I have had a look at this helmet myself and can confirm it appeared very well made and reasonably comfy, cetainly worth a mere £50!

GRAB YOURSELF A BARGAIN WHILE YOU STILL CAN...

I read a very good article on independent tests recently (can't find it again, sorry) which suggested that making helmet to meet existing (pre-SHARP) tests produced helmets that weren't that good in the real world.

The end result being 'flimsy' cheap chinese helmets worked better in real world crashes than their more robust and expensive rivals.

I don't buy on price personally, I buy on fit. For my over-sized square head that means expensive Arais. Oddly it used to mean expensive Shoeis but the designs seem to have changed in recent years.

So... makes not odds to me either way.

This is partly the basis of my doubts on the scheme too.

What may provide perfect protection for city commuters and scooter riders may be totally inadequate for a track day junkie, even those in the slow group. Most of us will seek out country roads for a nice Sunday ride out and you're looking at the closing speed of oncoming traffic being at least 100mph.

And lets not forget, it's only in recent years that a non-sportsbike has been able to break in to the top 5 best sellers in the UK, i.e. BMW GS, due to the "Ewan and Charley" phenomena. Maybe the scheme has chosen to ignore that but to sum up, we have a ratings system assessed at less than 20mph, where as the top 4 best sellers in the UK can all double the national speed limit with ease!

RIDE mag, unlike MCN, has no obvious affiliation with a helmet manufacturer and they use an impact speed of 120mph in their independent tests. Not realistic you may say but I see a regular indicated (and perfectly legal) 150mph+ on the autobahn's every time I go to Germany and that's with luggage and still accelerating. Some helmets (even the cheap ones) came off better in RIDE's tests, some worse, and yes, Arai did throw their toys out of the pram as expected. Whether you favour RIDE's or SHARP's results would depend on your definition of reasonable road use and being fit for purpose.

What is worrying is that if a helmet is capable of absorbing such a low speed impact so well and apparently so much better than an carbon or composite lid, are they able to retain these same characteristics after a minor drop, off a chair for example, or does the deformation (like a crumple zone) make the helmet unsafe? Like I've said before, I respect Neil's viewpoint but I think the tests leave a lot of questions unanswered. One thing is certain and that is more people will give more thought to their choice of helmet, whether they choose to trust the SHARP ratings or not. Do your own research before you buy and make an informed choice.

One of the bike magazines tested this a few years ago. They lobbed a helmet off a mountain. It looked battered and tested exactly like a new one.

I don't know what the build was, but I've always suspected the 'of you drop it buy a new one' myth was started by helmet manufaturers.

As for 100mph impacts with oncoming traffic. I wouldn't worry. Even if your head survives the rest of you won't.

I AGREE

Now that is beyond refute...

Just a thought on RIDE's 120mph impact speed is that not surely for a Sportsbike Helmet as is the 150mph plus on the autobahn. Are the majority of adventure riders ever going to go much over the ton for very long. Most fully laden trail bikes struggle to go much quicker and suffer vibes etc. Then theres the other issue of why we travel. Personaly I do it to see countries and on foreign unfimiliar roads you dont take a lot in if you are concentrating at going over the ton. Ditto the survival rate at in impact speed of much more than 60 mph. I cant imagine many folk surviving a head on at much over 40 mph into any hard object. No matter how good the helmet is.

I'm just off to buy a pair of £200 evisu jeans why because I'm sure they will look so much better than my mates £5 tesco specials, I'm sure they will last 50 times longer as well !

I think its harsh when someone says someone else is " full of crap ", just because they havnt understood the main point of the topic.

If you strike a good deal on a £400 helmet does it cease to be a £400 helmet, rrp is just that recomended. ie the price any idiot will pay not the price some may pay. I always try to strike a deal on anything I purchase, idiots are the ones who pay the ticket price, they push the price up for other idiots.

Maybe we could resolve this discussion with a butt off. Those in favour of value and Test results could run head on at those wearing their Arishoegv Lids and the winner is the last helmet standing.

4 days till travel, and I can ignore this...
 

the problem is, the nonsense peddled that started this thread:

"These tests are without any doubt the most stringent EVER applied to safety helmets and thats a FACT"

there is no FACT in that statement, it's a complete mis-representation of the truth.

in addition, this thread seems to confirm that fit, feel and intended use over-ride price and safety rating. so we pretty much all agree.

somewhat confirmed by the original poster buying an open face (due to high degrees of heat in the Kent area), which was a non-SHARP-rated helmet.

but this has almost nothing to do with travel.....

Very true. A friend of my uncle was decapitated after hitting a truck. No idea what helmet he was wearing but it's performance was obviously irrelevant. I was simply trying to illustrate that the test speed used is a little on the low side compared to the capabilities of modern bikes. Maybe my viewpoint is only relevant to sportsbike riders who are much more likely to throw themselves into a field but let's be honest, no-one buys an R1 or any other litre sports bike to ride at legal speeds.

:rofl:. I'd pay to watch that.

I always try to pay below list too and don't buy into paying over the odds because some Moto GP or WSB rider gets paid to wear one. I don't buy ones with graphics or iridium visors either as I don't feel the need to look like a power-ranger.

I'm not going to ignore these tests as they do have some validity, but I'll certainly be cross-referencing them with other tests before I part with any cash.

Neil is a former motorcycle traffic cop. Are you insinuating that his statements would be anything other than the truth?


Sorry, couldn't resist

:Beach:

"Neil is a former motorcycle traffic cop. Are you insinuating that his statements would be anything other than the truth?"

you ride/rode a fast bike, so I guess we have similar views on the status of traffic cops...

but yeah, I think there's mis-information here.

PS. I just thought ( in a general sense ) poo smells like poo not matter what animal it comes out of. make of that what you will...

It seems like everyone is starting to agree wow. Yes there may be flaws to the new tests but it would be stupid to disregard the results just because a cheaper helmet seems to perform so well. I know that before I choose my next lid I will study the results and try on a few of the highest performers and if the one that suits me the most costs £60 well then thats my luck.

I am not in a position to spend £300 plus on a Helmet it doesnt make me stupid or selfish toward my loved ones. I am just living in the real world, paying the bills and getting out on the bike whenever I can. If a cheaper helmet can save me in a fall and lets be fair thats what we need a helmet to do, because when you factor in fast moving solid objects then the odds are always against us. I have had £200 helmets but presently my lid cost £35 quid its a no namer but made in the very same factory as one that sells for £100. Mines plain grey and it keeps me safe. I agree 100 % that fit and feel are important factors noise doesnt worry me as much, I ride to music most of the time it keeps me alert. I would be happy to ride without a helmet, I have and I will again, when conditions allow.

The day I decide bikes are too dangerous is the day I stop riding, not the day I buy a more expensive lid because clever marketing brainwashed me into beliving it was safer.

Dougie have a safe and great journey :scooter:

"The day I decide bikes are too dangerous is the day I stop riding"

that's perfect....