Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > BMW Tech
BMW Tech BMW Tech Forum - For Questions specific and of interest to BMW riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 23 Feb 2008
Registered Users
HUBB regular
 
Join Date: Jan 2008
Location: On the road, u.k - Australia
Posts: 43
Valve Clearance Help Needed R100gs

Hello, this is my first post, I have been searching the hubb for a few weeks now and have found it very useful for planning my trip but I can't seem to find anything on how to check the valve clearance on my 1988 R100GS. I'd like to learn a few things before I set off, I'm a total novice at anything mechanical, tried to do it today but got fairly confused.

Which is the intake and which is the exhaust valve? Is exhaust closest to the front wheel on both sides?

Is it essential to make sure the cylinder head retaining nuts are at the correct torque before checking clearance, if so does anyone know the size of the socket needed for this as I don't seem to have it.

When I get it to TDC, is that the right point to check both valves on both cylinders, or is that right just for one cylinder.

Any help much appreciated.
Reply With Quote
  #2  
Old 23 Feb 2008
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
Once you've got the valve cover off (centre nut plus the 6mm nut front & rear, hidden inside the fins on the head), you'll see two valve & spring assemblies. The one nearest the exhaust is the exhaust valve & you've guessed, the one nearest the carb is the inlet valve.

You need to rotate the engine, either by putting it in top gear & rotating the rear wheel in the usual direction of travel or by removing the cover on the front of the engine & using either a spanner or T-bar on the nut on the end of the crank. As you look at the engine from the front, the engine rotates clockwise. Remove spark plugs from both cylinders before rotating engine.

Rotate the engine, pay attention to the inet & exhaust valves being compressed alternately by their respective valve gear. You need to find TDC (top dead centre - where piston is at the tp of the bore & both valves are closed. TDC can be determined in 2 ways:

With the plug out, poke a straw or pencil down the plug hole, slowly rotate the engine, you'll feel the piston move up the bore towards the head - you're now approaching TDC - When the pistin stops moving, you've reached TDC.However, keep rotating until you see the inlet being compressed & then released - next time you reach TDC, piston is in the correct position to check the valve clearance. Try waggling the rocker arm, there should be some free play, if not, the valves are either too tight or you're 360 degrees out on crank rotation.

Alternatively, remove the black rubber cap on the left side of the engine, near the carb, shine a torch in as you rotate engine, you're looking for the "OT" mark. Rotate as above, keeping an eye on inlet valve. Once inlet valve is closed i.e. no longer compressed, the next time the OT mark is in the centre of the hole, you're okay to check the valves, checking for freeplay as described above.

Once adjusted, repeat on the other cylinder.

TBH I think you should do this under guidance, getting it wrong can wreck an engine. If going to perservere, keep roataing the engine, familiarise yourself & hopefully understand the way the inlet & exhaust valves interact with each other. Reading a book on four stroke engines could save you a lot of grief & money.
__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #3  
Old 24 Feb 2008
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
What steve has said is all correct.....

But


Which is the intake and which is the exhaust valve? Is exhaust closest to the front wheel on both sides? YES


When I get it to TDC, is that the right point to check both valves on both cylinders, or is that right just for one cylinder.

FIrst off I suggest you get a Haynes manual. It will be useful to you.

When I do my tappets I do it the Triumph way, as the timing relationships are the same for BMW's as the Parallel twins.

Remove both rocker covers . Keep them seaparate as they are handed.
With the bike in top gear rotate the rear wheel forwards until one valve is rocking..
At that point adjust the SAME valve -ON THE OTHER SIDE-
When done rotate the wheel some more and repeat the process until you have done all four valves.
Now rotate again and check all four valves have the correct clearance ( when the opposite valve is rocking).
No need to look for TDC or worry about which cylinder to do.
This way will ensure you set the valve clearance at the base of the cams, as with one valve rocking the point is 180 degres away.

Last edited by oldbmw; 24 Feb 2008 at 20:42. Reason: Tripewriter malfunction
Reply With Quote
  #4  
Old 26 Feb 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2007
Location: Kamloops, BC Canada
Posts: 109
More airhead information

Quincy,

If you haven't come across it yet, you might want to check out Robert Fleischer's site at BMW Motorcycle Repairs . I think article #40 at Setting valves in BMW airhead motorcycles has the kind of comforting detail you need when doing something for the first time. The old guy gets a little verbose in places but he is the first to admit it. That's OK with me. His rather detailed articles on everything airhead gave me the courage to replace all the seals in my 75 R60. Good info there. Go for it.
__________________
Samuel Longiaru
Kamloops, BC Canada
1975 BMW R60/6
http://thetwilightproject.net
Reply With Quote
  #5  
Old 26 Feb 2008
Registered Users
HUBB regular
 
Join Date: Jan 2008
Location: On the road, u.k - Australia
Posts: 43
Thanks for everyones help. I thought of a few more questions whilst in work today, but that link has just answered them. I'm now feeling pretty confident and i'm going to go back out there on Saturday and give it a shot. I'll let you know how I get on....
Reply With Quote
  #6  
Old 12 Apr 2008
Registered Users
HUBB regular
 
Join Date: Jan 2008
Location: On the road, u.k - Australia
Posts: 43
I've done it and it went well, the exhaust clearances on both sides needed adjusting, but now they are done and the bike is running great. I couldn't be more of a novice, so if I can do this anyone can. My advice to anyone reading this in the future thinking of having a go themselves is to go slowly and think it through but to definitley give it a try.
Reply With Quote
  #7  
Old 12 Apr 2008
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
Quote:
Originally Posted by Quincy View Post
I've done it and it went well, the exhaust clearances on both sides needed adjusting, but now they are done and the bike is running great. I couldn't be more of a novice, so if I can do this anyone can. My advice to anyone reading this in the future thinking of having a go themselves is to go slowly and think it through but to definitley give it a try.
You have already learned one of teh most important things, do only one thing at a time then test to make sure all is ok.
Reply With Quote
  #8  
Old 12 Apr 2008
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
Smile

Quote:
Originally Posted by Quincy View Post
I've done it and it went well, the exhaust clearances on both sides needed adjusting, but now they are done and the bike is running great. I couldn't be more of a novice, so if I can do this anyone can. My advice to anyone reading this in the future thinking of having a go themselves is to go slowly and think it through but to definitley give it a try.

Here, here!

And when you get it done, you have a much better feel for the engine: as I am riding I can "see" all the bits and pieces rotating or otherwise hammering up and down: empathy with the machinery I guess.
__________________
Dave
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
R100GS Parts needed Rapid Dog BMW Tech 3 22 Dec 2006 00:22
What valve setting tools needed for R1200GS? jv3 BMW Tech 0 16 Sep 2006 17:12
Valve Clearance hurdles tmotten Yamaha Tech 2 5 May 2006 04:39
Valve Clearance - Help Needed Andy White KTM Tech 2 18 Mar 2006 14:16
dommie valve clearance gozell Honda Tech 2 20 Jan 2003 22:18

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 22:33.