Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > BMW Tech
BMW Tech BMW Tech Forum - For Questions specific and of interest to BMW riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 17 Dec 2002
Contributing Member
Veteran HUBBer
 
Join Date: Nov 2000
Location: Wirral,UK
Posts: 172
Cylinder head studs

Whilst torquing the cylinder head studs on our two R80GSs at Mr. Yut's in Bangkok, both bikes suffered a stripped thread. Andreas also had the same problem in Iran on his R80GS.

Seems to be quite common as there is an oil feed within the actual thread where the upper exhaust side stud locates

More of the legendary BMW reliability or are we missing something?

------------------
Sean
__________________
Sean
Reply With Quote
  #2  
Old 18 Dec 2002
Grant Johnson's Avatar
HU Founder
Veteran HUBBer
 
Join Date: Dec 1997
Location: BC Canada
Posts: 7,216
Bit of both...

This isn't a rare problem unfortunately, and it always seems to come down to slightly overzealous torquing - or worse, bad calculations in translating from NM measurements to ft-lbs, or using Nm numbers in place of ft-lbs.

The manual specifies:

35 + 4 Nm OR
25 + 3 ft-lbs.

Note some manuals say 24-27 ft-lbs.

Obviously confusing the numbers and doing bolts up to 35-39 ft-lbs is going to do the threads in.

Not as obviously, going to the max torque listed of 39Nm or 28 ft-lbs is too much.

Experience on airheads says that safe torque is 24 ft-lbs or 35 Nm MAX.

A common problem is assuming that slightly tight will be good, so we always torque down to the high end of the range - I did so for years myself. Bad idea. And torquing down in three stages as the manuals suggest is also a VERY good idea as it prevents one bolt from being overtorqued due to the leverage effects of uneven torquing.

Who knows when the bolts were overtorqued, but it's certain that they were. However, knowing why doesn't help much when it's too late.

The fix is fairly simple, but difficult to carry out well. Just use helicoils or inserts, whatever seems appropriate and is available. It is absolutely critical to get them in straight, and also not block the oil passages.

A hand drill aligned by eye with the greatest care and assistance will result in a destroyed engine block - you have been warned.

It must be done with a jig or drill press locked at exactly 90 degrees to the surface. A very long drill bit drilling down through a cylinder bolt hole is possibly a way to do it accurately enough, if it's bolted down with the other three bolts, and a sleeve to hold the drill bit exactly in the centre of the bolt hole at the top.

Use Loctite on the insert or helicoils to ensure they don't back out or loosen. Make sure the inserts are long enough with lots of thread depth - two may be required.

Good luck, and take your time and be careful!!


------------------
Grant Johnson

Seek, and ye shall find.

------------------------

One world, Two wheels.
www.HorizonsUnlimited.com
__________________
Grant Johnson
Seek, and ye shall find.

------------------------
Inspiring, Informing and Connecting travellers since 1997!
www.HorizonsUnlimited.com
Reply With Quote
  #3  
Old 1 Jan 2003
Registered Users
New on the HUBB
 
Join Date: Jun 2002
Location: Heathrow,UK.
Posts: 11
Hi Sean,how's it going??Good to see you out there doing it!!
I had lots of problems on an r100RT that had done in excess of 200K miles.
It doesn't help if the engine gets overheated especially if the bolts are at the top end of the tightening scale.Like Grant says:if you are worreid about not being able to get the hole square,then don't even attempt it!Use a greased rag behind the hole to catch the swarf from the drill,but also remove the sump to ensure there is none in the crankcase too.
Basically you will only have one chance!!
Good luck.
Bailey.
Reply With Quote
  #4  
Old 11 Jan 2003
Contributing Member
Veteran HUBBer
 
Join Date: Nov 2000
Location: Wirral,UK
Posts: 172
Hi chaps

Thanks for the info.

After double checking with my mate, we reckon that Mr. Yut was torquing our nuts to 42Nm! His information was from a book, which was obviously out of date. No wonder the threads stripped and 'he has seen the problem quite a few times'.

Anyway, we let him sort the problem out and he had new studs made with a larger thread and fitted them. Not sure how he drilled the hole, but so far all now seems AOK for a total cost of about $100. Not the end of the world by any means.

I also found info from the BMW owner's club of america which categorically states 35Nm maximum and ALWAYS slacken the nuts before torquing them or the studs WILL pull out.

Thanks again from Phnom Penh.



------------------
Sean
__________________
Sean
Reply With Quote
  #5  
Old 26 Jan 2003
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2001
Location: Gerrards Cross, Bucks, UK
Posts: 150
Sean,

Just to reassure you, I had the same problem before I left the UK and on the road (also in Bangkok, strangely enough). I got Mr Yut to put a couple of inserts in and it's still going strong!!

Harvey

------------------
no pipe, no slippers
www.chasingthesun.org
__________________
no pipe, no slippers
www.chasingthesun.org
Reply With Quote
  #6  
Old 27 Jan 2003
Contributing Member
Veteran HUBBer
 
Join Date: Nov 2000
Location: Wirral,UK
Posts: 172
Hi Harvey.

Strangely I'm back in BKK. Mr. Yut has replaced the second stud after it failed on the run from Phnom Penh to Chiang Mai.

I hope that this is the last one....

Happy travels!

------------------
Sean
__________________
Sean
Reply With Quote
  #7  
Old 15 Mar 2003
Contributing Member
Veteran HUBBer
 
Join Date: Nov 2000
Location: Wirral,UK
Posts: 172
Hi chaps

Well, the first stud replaced with an oversize in BKK has pulled itself out, without any outside interference. Dodgy repair?

The bike is rattling badly, but i rode it from Darwin to Sydney like this, so I guess it's not terminal.

A local BMW shop reckon they can put in an oversize insert to marry with the oversize stud. We shall see, but I have so little confidence now. Will my BMW always rattle?

------------------
Sean

[This message has been edited by Sean Kelly (edited 15 March 2003).]
__________________
Sean
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 20:50.