Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > BMW Tech
BMW Tech BMW Tech Forum - For Questions specific and of interest to BMW riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 30 May 2010
nico-la-vo's Avatar
Registered Users
HUBB regular
 
Join Date: Jan 2009
Location: north yorks
Posts: 90
r100gs - gear oil just won't stop leaking. WHY?

Hello all, I've a r100gs 1988 model and I have a bit of a problem.

The bearings went on my last gearbox and unable to replace them myself I opted to get a new (well reconditioned) box. I fitted this and started to notice oil coming from the output seal. It was coming out at the rate of about 100cc every 500miles. Not a lot but enough to cause a lot of mess on the exhaust box. As we plan to go to Africa it needed fixing as gear oil is harder to come by there to keep it topped up.

I, and everyone who saw the oil coming out, was certain that the seal was leaking. I got in touch with the shop who sold me the reconditioned box and they agreed to send me a new one to try out. I have put that in and the oil is still leaking out!

I'm now really confused. It can't be the output seal twice I am certain it is fine. I'm not overfilling the oil and I'm using the correct type. I'm not busting the seal when I attach the drive shaft. The V shaped groove in the back of the geabox is the newer type small diameter hole so I shoudn't need to fill it. What else can it be?

Any suggestions would be appreciated.
__________________
Far From Home, U.K - Oz and beyond.
http://www.globegallivanting.blogspot.com/
Reply With Quote
  #2  
Old 30 May 2010
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
If you are using synthetic switch to Dino oil. It may just be an old type seal.
Reply With Quote
  #3  
Old 30 May 2010
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
1) The gearbox is vented through a hole in the screw for speedometerwire (the main earth-connection is also attached here.). Remove the screw and see if the hole is blocked.


2) There is a small notch above the seal. On all paralever-models this has to be filled with silicon. It's a common mistake to "forget" this during a rebuild or when the seal get changed.

It's possible to check (and fix) this by loosen up the rubber-boot but it's much easier if you remove the wheel and shock and slide the swingarm 20mm backwards. You don't have to loosen the shaft.

3) The seal is mounted different on paralever and monolevers. On a paralever the spring should be facing towards the gearbox (you should not be able to see the spring).
This can be inspected at the same way as #2.

The orientation of the seal and using silicon in the notch is the only thing you have to change if you use a monolever box in a paralever.
Reply With Quote
  #4  
Old 30 May 2010
Gummikuh's Avatar
Which way??
Veteran HUBBer
 
Join Date: Oct 2005
Location: In a Tent
Posts: 185
Totaly agree with Ali Baba


Werner
__________________
Just traveling
www.horizonsunlimited.com/tstories/longwayhome
Reply With Quote
  #5  
Old 30 May 2010
nico-la-vo's Avatar
Registered Users
HUBB regular
 
Join Date: Jan 2009
Location: north yorks
Posts: 90
Thanks for suggestions so far.

I am using a semi synthetic oil. 80/90 so I'll try and switch to plain oil to see if that works. I think the seal may be the older type. Speedo drive and earth screw are clear of blockages. The seal is mounted the correct way around with the spring facing the oil.

Alibaba, I was under the impression that the notch in the gearbox casing needn't be siliconed if it is of the newer small type. The last box I had required the silicon filling as it has a larger V shaped groove in it and then I drilled through a 1mm hole so that it could still breath out of this. This box has the newer smaller notch already and I thought the problem of oil leaking out had been corrected by the manufacturer so I didn't have to silicon this one. The notch is a lot smaller. You think it still needs doing? And you do still think I need to drill a hole back through it so that it can breath?

Thanks again
__________________
Far From Home, U.K - Oz and beyond.
http://www.globegallivanting.blogspot.com/
Reply With Quote
  #6  
Old 31 May 2010
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
Quote:
Originally Posted by nico-la-vo View Post
Alibaba, I was under the impression that the notch in the gearbox casing needn't be siliconed if it is of the newer small type. The last box I had required the silicon filling as it has a larger V shaped groove in it and then I drilled through a 1mm hole so that it could still breath out of this. This box has the newer smaller notch already and I thought the problem of oil leaking out had been corrected by the manufacturer so I didn't have to silicon this one. The notch is a lot smaller. You think it still needs doing? And you do still think I need to drill a hole back through it so that it can breath?
The notch should always be completely filled (on a paralever).
All components have separated vents. The gearbox vents through the earlier mentioned bolt, bevel-box through the plastic-vent and the cardan-housing through the pivot bolts that attach it to the frame.

I have a bike with a late gearbox (1996) and when the notch was open it used 100 ml oil every 1000-2000 km. It's worse at high speed and mountain-passes.
Reply With Quote
  #7  
Old 31 May 2010
Registered Users
Veteran HUBBer
 
Join Date: Oct 2002
Location: Stockholm - Sweden
Posts: 317
Alibaba is as always on top of this

Yes - known BMW "personality"... or -fault-... depending on point of view.

You need to fill the hole with silicon.

I use Omega 690 80W/90.
www.smortknik.se
Magna Industrial Co. Limited
http://www.magnagroup.com/products/o...re/odis690.pdf

Surpriced that the shop that supplied the gearboxes to you did not know this... You -did- point out to them that you were replacing a GS/PD gearbox, right???...

Once sealed - no problem
__________________
Drive Safely,
Albert
Reply With Quote
  #8  
Old 31 May 2010
nico-la-vo's Avatar
Registered Users
HUBB regular
 
Join Date: Jan 2009
Location: north yorks
Posts: 90
Thanks guys, will seal the hole. Do you think there is any way of doing it without removing the driveshaft?
__________________
Far From Home, U.K - Oz and beyond.
http://www.globegallivanting.blogspot.com/
Reply With Quote
  #9  
Old 31 May 2010
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
Quote:
Originally Posted by nico-la-vo View Post
Thanks guys, will seal the hole. Do you think there is any way of doing it without removing the driveshaft?
Yes (read my first post).
It's even possible to do it with the swingarm in the frame but you will have a hard time to get the boot back on.
Reply With Quote
  #10  
Old 18 Jun 2010
Registered Users
HUBB regular
 
Join Date: May 2008
Location: London, England
Posts: 42
I Had a problem with oil leaking out of the "V" groove on the output seal casing had two atemps of trying it fill it with siconce but that did,nt work, when l changed the seal the third time l filled the groove with JB weld and sanded it with fine grade wet and dry to make a good finish, 10,000 miles later and i,ve had no leaks.
__________________
Morocco 2012
Morocco 2010
Reply With Quote
  #11  
Old 11 Aug 2010
Registered Users
Veteran HUBBer
 
Join Date: Sep 2002
Location: london,england
Posts: 186
just out of interest, did you get the box from sherlocks?
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone with the HPN lower 1st gear in their R100GS? jimbee BMW Tech 5 1 Feb 2009 19:56
How to stop oil consumption? (R1100GS) fernan_ci BMW Tech 17 19 Feb 2008 14:31
how do you stop an oil leak allen starkey Yamaha Tech 3 24 Mar 2006 02:40
Stop with the Ewan comparisons already slim161 Travellers' questions that don't fit anywhere else 11 6 Nov 2005 04:58
Gear box leaking R1150GS Ruta40 BMW Tech 7 27 Jul 2004 23:52

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 12:29.