Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > BMW Tech
BMW Tech BMW Tech Forum - For Questions specific and of interest to BMW riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 6 Mar 2002
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2001
Location: Gerrards Cross, Bucks, UK
Posts: 150
R100GS running rough

My R100GS is not running so well at the moment and I need some ideas on what might be causing the problem.
The bike idles and accelerates fine, but when I get moving and hold it in the low to mid rev range it runs very rough. The right hand carb is running too rich (sooted spark plug and exhaust) but I can't seem to solve this by adjusting the mixture screw.
I overhauled the carbs with new O rings a short while ago, but not the diaphragms as they seem fine.
I balance the carbs by ear because I'm on the road and don't carry a 'carbtune' or similar, so they may not be perfectly balanced. However, I also balance my girlfriend's R80ST by ear and it runs like a dream...
Does anyone have a good idea what might be wrong? I'm leaning towards the float needle being worn.
Harvey
www.chasingthesun.org
__________________
no pipe, no slippers
www.chasingthesun.org
Reply With Quote
  #2  
Old 6 Mar 2002
mmaarten's Avatar
Gold Member
Veteran HUBBer
 
Join Date: Sep 2001
Location: Thailand at the moment
Posts: 593
Hi,

I don't know the BMW very well (actualy not at all), but I guess the mid-range is not affected by the mixture-screw. This screww usually covers 1/8 part of the carb-opening.
The rest is up to the needle and main-jet, so your idea about changing the needle could be a good one.
It could also be the jet itself, I would always change them as a pair. You could try putting the needle a click lower.

Good luck

Maarten
Reply With Quote
  #3  
Old 6 Mar 2002
Registered Users
Veteran HUBBer
 
Join Date: Jan 2001
Location: Nottingham, UK
Posts: 148
I'm no expert - but from what you say it could be a problem with one of the jets that's in use for your throttle setting you're having problems with.

My Haynes manual says that "1/8 throttle setting is controlled by the pilot, 1/8 to 1/4 by the throttle cutaway, 1/4 to 3/4 by the needle position and from 3/4 to full by the size of the main jet.

From your description it sounds like the problem is occuring at the point when needle position is critical. Perhaps this needs investigating and making sure both needles are set-up correctly and aren't worn (they go oval after high mileage)- I seem to remember that if they are removed, the clips that hold them in place need to be put back in the correct groove for both carbs.

Haynes also says the following (under "Poor running or lack of power at high speeds"):

To check that the main jet isn't blocked. Water in the fuel can also be a problem. Condensation inside the tank can gradually create enough water that'll sink to the bottom of the tank and cause running problems (unlikely though). Air bleed holes could be blocked. Check the fuel hoses for kinks or blockages or the diaphragn could be split (hold it up to the light).

Hope some of this helps - most of these suggestions come out of Haynes... Perhaps you have a manual and have already tried these things? Good luck - I know from personal experience how frustrating carb problems can be - it might be worth getting them checked out with gauges, if this is possible? Diagnostic equipment really helps solve these sort of problems I think...

------------------
Fuzzy Duck
(I'm quackers about bikes)
__________________
Fuzzy Duck
(I\'m quackers about bikes)
Reply With Quote
  #4  
Old 7 Mar 2002
John Ferris's Avatar
Gold Member
Veteran HUBBer
 
Join Date: Feb 2001
Location: Reno,NV,USA
Posts: 560
Hi Harvey, Cleen out your carb as much as possable without taking them off the bike.
Check your diaphram and the jet needle.
Sometimes the jet needle clips can wear a slot in between the clip positions.
I am not sure which carbs you have. some jet needles go in from the bottom of the slide and you turn-push-pull to adjust them, some go in from the top of the slide under a screw in the center tube of the slide. I think the needle jet is the mid-range mixture
Let us know what you find. Good luck. John
Reply With Quote
  #5  
Old 9 Mar 2002
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
Check your floats and float needles.

New floats weigh in at 12 to 12.5 grams. The rubber tip of the float needle may be getting hard and not sealing as well.

Correct float level adjustment is achieved when the floats are parallel to the mating surface of the float bowls on the carbs, at which point, the needles should be sealing.

Did you do a quick overhaul, or did you take the carbs apart completely?

Did you clean the area of the atomizer and needle jet. These items are held in place by the main jet holder. Notee that thye are difficult to install unless the carb is upside down. This area can really get clogged.

Is one choke plate not returning to the "off" position. Rememeber, these are pulled back by springs that may be weak and if the shaft is sticking, you are driving with the choke "on". Check by manually pushing down on the levers.

Let us know what the problem and solution was.
__________________
All the best,
Alex

Alex's BMW Motorcycle & Global Touring Page
SmugMug Site
Alps Motorcycle Tours - Priced Right


- If motorcyclists claim to be individuals, why then do so many of them ride in packs?
Reply With Quote
  #6  
Old 2 Apr 2002
Contributing Member
New on the HUBB
 
Join Date: Apr 2002
Location: Bärenklau, Brandenburg, Germany
Posts: 9
hi harvey,

i dont know if you have fixed your 'running rough' problem in the meantime. but if you dont find anything about the carbs, here's another hint:

i'm not sure what kind of ignition your 89 r100 has, but it might be possible, that the fixing between the camshaft and that part, that tells your ignition to ignite (it depends on model and year but should be a so called Hall-Geber (in german)), is somewhat worn out. with the result that also both ignition-signals are still exactly 180 deg. apart, one is little too late and the other too early.

if you havent fixed the problem yet send me a mail with information about your ignition-system, and we get into it.

long may you run
gerd
Reply With Quote
  #7  
Old 18 Apr 2002
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2001
Location: Gerrards Cross, Bucks, UK
Posts: 150
Chaps,
Many thanks for all the advice. I tried various different things and eventually narrowed it down when the HT lead failed on the way back from the Tibetan border! A new lead seems to have solved the problem, but I need to get out of Bangkok before I can really tell.
Harvey

------------------
no pipe, no slippers
www.chasingthesun.org
__________________
no pipe, no slippers
www.chasingthesun.org
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 08:16.