Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > BMW Tech
BMW Tech BMW Tech Forum - For Questions specific and of interest to BMW riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 26 Aug 2012
BlackDogZulu's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2008
Location: West Wales, UK
Posts: 753
Immobiliser removal - F650GS

I've recently picked up a 2004 650GS which I am very pleased with. One thing puzzled me - the toolkit was in the useful little stash space in the tailpiece, when the manual showed it being located under the seat. I thought there was no room under the seat until I read a post on F650.co.uk showing where it should be. In the place where the toolkit should go, there is a little black box which I am sure is the immobiliser black box (fitted shortly after purchase by the original owner). It's a Meta M53T.

This is yet another reason to get rid of the damn thing. I don't like immobilisers anyway for a lot of reasons, but this one is spectacularly inconvenient for the rider. To get the bike operational, you first have to tap the brake pedal, then wipe the little fob thing against an area of the dash. Only then can you put the key in and start it. Of course, if you didn't tap the brake hard enough, or wiped the fob in slightly the wrong place, it won't start, and it's back to square one. It's driving me mad already, and I've only had the bike a couple of days.

Anyway, rambling as usual, I need to remove the immobiliser. If I had a circuit diagram, or a copy of the installation instructions, my wiring and soldering skills are good enough to let me attempt it. Of course, it's impossible to find these on the web, both for security reasons and because the M53T is now discontinued. Can anyone help with this? I have (or will have) the V5 in my name, and I have the installation certificate and invoice from when it was fitted, so I can prove it's a genuine case and not some scrote trying to fix a stolen bike.

I'm tempted to find a BMW dealer (none near here) and get them to reinstate the original wiring. The hazard switch on the bars has been removed to make way for the immobiliser LED, which is a shame. It might be easier and more reliable to get a dealer to do the job (if they will), but as someone who tries to all his own work on bike, it goes against the grain a bit.

Does anyone have any thoughts on this?
__________________
2006 XT660R daily ride, 1994 XT600E about to be reborn, Blog: http://goingfastgettingnowhere.blogspot.com/
Reply With Quote
  #2  
Old 26 Aug 2012
Gold Member
Veteran HUBBer
 
Join Date: Jul 2008
Location: London
Posts: 404
A few years ago I had to remove a Meta M357T from my Honda Dominator. It was misbehaving a lot and threatening to permanently disable the bike.

I ended up at Abacus Alarms, who sell documentation for various alarms. I bought the installation manual, with which I was able to remove it.

I just looked at their website - couldn't see the M53T listed. But maybe contact them, here:
Contact Us

Cheers
__________________
TTR250 - London to Cape Town
Reply With Quote
  #3  
Old 26 Aug 2012
BlackDogZulu's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2008
Location: West Wales, UK
Posts: 753
Very helpful, thank you. I've been told (since I posted the above) that it's fairly easy to remove, just trace the wires to where they cut into the bike's harness, remove and resolder the original wires. If that's all it is, I can do it. But I have a sneaking suspicion that it won't be that easy. A circuit diagram (or install instructions) would help. Next day off, I will have good look at the installation and see if it is DIY-able. If not, I will follow up your suggestion. Much appreciated.

The M53T is discontinued, which is probably why it doesn't appear on the website.
__________________
2006 XT660R daily ride, 1994 XT600E about to be reborn, Blog: http://goingfastgettingnowhere.blogspot.com/
Reply With Quote
  #4  
Old 28 Aug 2012
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
You don't mention the previous owner: what paperwork etc does s/he have for the Meta??
__________________
Dave
Reply With Quote
  #5  
Old 28 Aug 2012
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
So, I've done a bit of googling and come up with these:-

Meta Alarm Removal - ::. UKGSer.com .::
That one says it is easy to remove a Meta alarm - just one wire? - but they don't say which Meta is being removed.


meta alarm manual - Page 4 - Workshop - Visordown
That one is potentially very useful; it has the phone no and email address for "bikealarm man" who is offering to provide advice about how to deal with alarms

South West Bikers | Motorcycle Forum • View topic - Meta Alarm Removal
And a bit of banter on the subject that might convince you to get a professional installer to remove it - I don't think you need a BMW dealer for this by the way; big bucks bills from them!!

I hope this helps.
__________________
Dave
Reply With Quote
  #6  
Old 28 Aug 2012
BlackDogZulu's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2008
Location: West Wales, UK
Posts: 753
Dave, thanks for these.

The bike came with the installation certificate and original invoice for fitting, and a photocopied page of instructions which repeated what the seller had told me about how to start the bike. I think the installing firm have gone out of business. Can't find them on the web, anyway. I have these bits of paper, plus a spare fob and the plastic thing with the code on, so it should be OK to convince anyone I haven't stolen the bike.

I had found Bikealarmman in various threads, but the latest I saw was from 2005 or so, and I wasn't sure he was still around. But I see he's been around so I might give him a call.

Those threads are useful - I found one of them in a search but not the others, perhaps because I was searching for the specific alarm M53T and some mentions are generic. Anyway, plenty to go at there. I'm off work next weekend, so I will have a go then.

It helps a lot, and thank you for taking the time to reply. From what I read, removing the alarm should be within my abilities. Famous last words ...
__________________
2006 XT660R daily ride, 1994 XT600E about to be reborn, Blog: http://goingfastgettingnowhere.blogspot.com/
Reply With Quote
  #7  
Old 31 Aug 2012
BlackDogZulu's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2008
Location: West Wales, UK
Posts: 753
Well, I emailed bikealarmman, and he was very helpful. He was a director of Target Technology when the bike had the immobiliser fitted there in 2004. Small world. Two things he said were:

The M53T has no hidden 'features' that might make it difficult to remove the immobiliser. It is simply a matter of cutting the unit out of the harness and remaking some connections that were cut on installation. That's a relief, and I'm pretty sure I can do that myself. Pete (bikealarmman) offered to talk me through it on the phone, but I said I would try it myself first.

The second thing was that a faulty immobiliser may well be causing some odd symptoms I have been having with the indicators. (Failing to work, very slow flashing, or variation in speed.)

I have a few days off work now, so I will be tearing into it with a multimeter and soldering iron as soon as I finish all the household jobs that SWMBO has lined up for me.
__________________
2006 XT660R daily ride, 1994 XT600E about to be reborn, Blog: http://goingfastgettingnowhere.blogspot.com/
Reply With Quote
  #8  
Old 2 Sep 2012
BlackDogZulu's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2008
Location: West Wales, UK
Posts: 753
Bad form to reply to your own posts, but an update:

The immobiliser is now gone. Very straightforward - 2 wires to cut where they were T'd into the loom, and three places to reconnect original wires cut by the installer. I needed to patch some new pieces in because the installer had cut lengths out of the harness to keep the overall lengths the same, but otherwise easy-peasy.

Took me about three hours, of which probably half that time was taking off the panels and air filter assembly (for the first time, Haynes book in hand) to get at the wiring.

Thanks to everyone for the advice and observations, and especially to bikealarmman for taking the time to answer a complete stranger's emails.
__________________
2006 XT660R daily ride, 1994 XT600E about to be reborn, Blog: http://goingfastgettingnowhere.blogspot.com/
Reply With Quote
  #9  
Old 3 Sep 2012
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
Happy ending

It might be bad form but at least the thread is completed, more or less - i.e. did this fix the issue with your indicators? (well OK, that is in a different thread, but you thought the two problems could be linked).
__________________
Dave
Reply With Quote
  #10  
Old 3 Sep 2012
BlackDogZulu's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2008
Location: West Wales, UK
Posts: 753
Quote:
Originally Posted by Walkabout View Post
It might be bad form but at least the thread is completed
I've always thought it good protocol to post an update to a thread if something is resolved, for the benefit of future searchers if nothing else.

As it turns out, the immobiliser wasn't connected to the indicator circuit at all. I suspect dirty switch contacts for that one. The flasher switch started playing up too, and a bit of fiddling with contact cleaner seems to have cured that, and perhaps the indicators too. They're working OK for the moment, but with an intermittent problem that's no guarantee. However, I am putting it down as 'fixed' for the time being
__________________
2006 XT660R daily ride, 1994 XT600E about to be reborn, Blog: http://goingfastgettingnowhere.blogspot.com/
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
F/S UK: Ally Panniers - BMW F650GS Dakar Lenz2 TRAVEL Equipment for Sale / Wanted 1 3 Sep 2012 17:06
Wanted bmw f650gs high seat. Gary117 TRAVEL Equipment for Sale / Wanted 0 14 Jan 2012 17:39
BMW F650GS problems in Nicaragua-need new clutch Smokechaser Central America and Mexico 4 11 Jan 2012 04:13
Dead Clutch on 2010 F650GS Smokechaser BMW Tech 1 4 Jan 2012 15:10

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 15:06.