Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > BMW Tech
BMW Tech BMW Tech Forum - For Questions specific and of interest to BMW riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Like Tree1Likes
  • 1 Post By tonylester

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 18 Jul 2013
Contributing Member
HUBB regular
 
Join Date: Mar 2011
Location: sydney australia
Posts: 40
800gs Rattle front brake disks

I have a 2010 model with 100,000 Ks
I am mid way through my 2nd set of brake pads and there is minimal wear on the disks.
But the floating disks are so loose that they now have 3-4mm play. And are starting to cut a slot on the pin which holds the brake pads in position
Anyone have any ideas on how to fix this maybe larger rivets or weld the disks in place. I am traveling in South America at the moment so replacing them is not an option.
Any suggestions ????
Cheers
Michael
Reply With Quote
  #2  
Old 19 Jul 2013
Registered Users
Veteran HUBBer
 
Join Date: Aug 2012
Location: Australia
Posts: 1,131
Quote:
Originally Posted by mjod View Post
But the floating disks are so loose that they now have 3-4mm play. And are starting to cut a slot on the pin which holds the brake pads in position
I think you meant "on the pin which holds the brake disk in position" ? And I'm taking it that way below.

The buttons (pins) are replaceable. And are rated as 'consumable'. They sit between the disk and the carrier, have one wave (spring) washer and an E clip. Get some replacements, they usually come with wave washers and E clip replacements too. Have them posted out to you at some place you'll be. You will want to replace them. They don't cost much. This is the way it is on my K model.

Until you can get some replacements, rotate them around a bit so the ware is evened out over the surface, hold them at that rotation with some silastic (RTV732 or any silastic product). You might even reduce the ware by putting some silastic in the joint area - rotate it so it is held as if the brake was applied. Why silastic? Because it is a good glue that will withstand the temperatures of the disk.

You could simply bolt them in place ... the disks are made to float so that when they heat up they don't distort, should not be a problem unless you are very aggressive with the brakes, overloaded down hill.. etc. You may need washers and spacers made up to do the job. R80G/S disks were riveted in place.If you go this way, do keep checking the nuts & bolts for tightness.

Last edited by Warin; 19 Jul 2013 at 02:56.
Reply With Quote
  #3  
Old 19 Jul 2013
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
DO NOT weld them...

There will be too much heat distortion and your disc will be all over the place...

If you can replace the pins, do that !!

If not, find somewhere nice to hold up and get some new discs shipped in.

100,000km on a pair of discs is very good going..
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #4  
Old 20 Jul 2013
Registered Users
HUBB regular
 
Join Date: May 2012
Posts: 65
Quote:
Originally Posted by *Touring Ted* View Post
find somewhere nice to hold up and get some new discs shipped in.
This is probably your only option. The float rings are pressed onto the disc and carrier and getting hold of the float rings will be much harder to get then new discs themselves, especially oversized ones. You will need a new brake pad pin aswell as your pad could get stuck on the groove and rub on the disc
Reply With Quote
  #5  
Old 22 Jul 2013
Registered Users
HUBB regular
 
Join Date: May 2013
Posts: 28
I think some bmw's had issue on this, are not later ones just wide flange bolts that hold them in place
Reply With Quote
  #6  
Old 22 Jul 2013
Registered Users
HUBB regular
 
Join Date: May 2013
Posts: 28
Quote:
Originally Posted by mjod View Post
I have a 2010 model with 100,000 Ks
I am mid way through my 2nd set of brake pads and there is minimal wear on the disks.
But the floating disks are so loose that they now have 3-4mm play. And are starting to cut a slot on the pin which holds the brake pads in position
Anyone have any ideas on how to fix this maybe larger rivets or weld the disks in place. I am traveling in South America at the moment so replacing them is not an option.
Any suggestions ????
Cheers
Michael
ps, can I ask, what is your view on the bike overall ? all the best jim
Reply With Quote
  #7  
Old 22 Jul 2013
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Quote:
Originally Posted by outdooredjim View Post
ps, can I ask, what is your view on the bike overall ? all the best jim
I'll get some pop corn for this one......lol

If I was to put it in one sentence...

"The most expensive 'built to a budget' adventure bike on the market"
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.

Last edited by *Touring Ted*; 22 Jul 2013 at 11:09.
Reply With Quote
  #8  
Old 17 Aug 2013
Contributing Member
HUBB regular
 
Join Date: Mar 2011
Location: sydney australia
Posts: 40
800gs rattle front brake disks

Hola All
Thanks for all your replies and advice.
So here is what has happened 2 weeks ago in Cali Colombia I was having some maintenance done on my brakes and the mechanic came up with the idea of re flattening the rivets ie re pressing them flat [layman's terms]. So that has taken all the rattle and movement out of the disks and now 2k later they are still dead tight. So hopefully that will get me home to Oz got about 4 months and 20k to go.
Warren I like the Idea of some silastic to take up the space between the disks rivets and carrier because in time it will get loose again is silicone the same product.
To jim and Ted I wont bore you to much I will just say that over all I am very happy with the bike, with Camping gear etc I am carrying about 50k and it doesn't matter whether I am on Highway or a rough muddy or sandy dirt road or track.Which is where I like to be, Sea leval or 5.5k meters this bike does it all with ease, and there is no other bike I would swap it for, in any condition its a pleasure to ride and !00k later It feels as good as the day I rode it out the shop door.
Hasta Luego
Michael
Reply With Quote
  #9  
Old 17 Aug 2013
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Quote:
Originally Posted by mjod View Post
. So that has taken all the rattle and movement out of the disks and now 2k later they are still dead tight.

To jim and Ted I wont bore you to much I will just say that over all I am very happy with the bike

And that's the most important thing...

Enjoy your trip and ride safe
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
XT600e front brake lever shorty replacement Cambelt Yamaha Tech 11 23 Jun 2014 23:19
Help with My Front Brake! Labrazzia Travellers' questions that don't fit anywhere else 4 3 Feb 2013 18:19
Indonesia. South Sumatera or Jarkarta. New Brake Pads and new Front Tire RTWbyBIKE.com West and South Asia 4 4 Jun 2012 05:27
Looking for a mechanic to replace front brake cable between San Juan Del Sur & Panama arooni Central America and Mexico 1 22 Feb 2012 12:53
Kawasaki KLE500 Front brake disc, UK royzx7r TRAVEL Equipment for Sale / Wanted 0 4 Jan 2012 16:34

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 15:51.