Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > BMW Tech
BMW Tech BMW Tech Forum - For Questions specific and of interest to BMW riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 6 May 2006
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
R1150 GS RAM Ball Install

Since I recently bought myself a new Garmin GPS, I thought it was about time that I install a dedicated mount instead of using Velcro strapping to hold my GPS to the crossbar pad.

I didn't like the RAM ball mounting options offered by RAM, so I came up with my own solution. What you see is a modified RAM-B-236 ball installed atop the BMW threaded bushing that holds down the BMW handguard.



The following describes the simple steps required for this installation.

The BMW threaded bushing after it was modified. It was removed by unscrewing the T-30 fastener (6 mm) from the underside of the BMW handguard. The minor diameter of an M6 x 1.00 fastener is 5 mm, but I used an M4 drill bit to drill the pilot hole the remainder of the way through the threaded bushing so as not to shave any material off the existing threads. It was then finish drilled using an M5 drill bit, the size required for an M6 x 1.00 tap.



The RAM-B-236 ball with 3/8" - 16 thread post as received from RAM.



The modified RAM-B-236 ball after the 3/8" - 16 threaded post was cut off, filed flush with the flange, lapped on wet sandpaper and then center punched, drilled and tapped for an M6 x 1.00 threaded fastener. 10 mm of threaded length is adequate.



The modified RAM-B-236 ball with an M6 x 1.00 stud installed. Loctite 242 was used on the stud. The exposed threaded length should be no more than 9 mm long so that it doesn't bottom out against the existing fastener that is screwed into the BMW threaded bushing from the bottom.



Additional notes:

The BMW threaded bushing comes "keyed" so that it doesn't rotate during installation. See the photo of the modified threaded bushing and you'll notice one of the two "flats".

The T-30, M6 x 1.00 BMW fastener that screws into the BMW threaded bushing from the bottom was originally coated with Loctite 242 (blue). The threads were cleaned and Loctite 242 was re-applied prior to re-assembly.

When screwing the modified RAM-B-236 ball with stud into the BMW threaded bushing, Loctite 242 (medium strength) should be used. Should any torque be applied to the RAM ball, then Loctite 270 (permanent strength) should be used at both ends of the modified RAM-B-236 stud.

In any case, be it a GPS, camera or whatever, I use a tether as a back-up.

A nylon washer was installed between the RAM-B-236 ball and the BMW threaded bushing; visible in the first photo.

The finished product is elegant looking due to the lack of the usual bracketry employed when installing a RAM ball.
__________________
All the best,
Alex

Alex's BMW Motorcycle & Global Touring Page
SmugMug Site
Alps Motorcycle Tours - Priced Right


- If motorcyclists claim to be individuals, why then do so many of them ride in packs?

Last edited by Global Rider; 28 Sep 2007 at 04:09.
Reply With Quote
  #2  
Old 21 Aug 2006
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
The Finished Product

As viewed from the seated position, this is what my Garmin 60 Cx looks like mounted to my RAM ball install as discussed above.

Positioning couldn't be better.

Positioning also places the unit close to the rider for better viewing and access to the GPS controls. More importantly, positioning doesn't obstruct the view of the Rider Information Display (RID) or the instruments. The reason why I chose not to go with the "speedometer mount" method was that its positioning of the GPS clearly obstructed the view of either the RID or the instruments, depending on the GPS in use. Cost? Under $10 or € 6.



Note the Garmin lanyard that I've looped around the stalk of the mirror to act as a tether.

Anyone else wanting to use this set-up, here is the itemized list:
- RAM-B-236, RAM 1" ball with 3/8 - 16 thread post, aluminium, modified as per the instructions in the initial post;
- RAP-B-201, RAM double socket arm for 1" balls, 3" long, plastic;
- RAP-B-238, RAM 2.5" x 1 5/16" base with 1" ball, plastic;
- RAM-HOL-GA12, RAM holder for Garmin 60 series, plastic.
- and one very capable Garmin GPSMAP 60 Cx.
__________________
All the best,
Alex

Alex's BMW Motorcycle & Global Touring Page
SmugMug Site
Alps Motorcycle Tours - Priced Right


- If motorcyclists claim to be individuals, why then do so many of them ride in packs?

Last edited by Global Rider; 6 Apr 2008 at 05:21. Reason: Incorrect product number.
Reply With Quote
  #3  
Old 12 Sep 2006
Gecko's Avatar
Slippery when wet
Veteran HUBBer
 
Join Date: Mar 2006
Location: Spain
Posts: 311
Nice one Alex but I beg to differ when you say it couldn't be better......There is a guy who make the ultimate in GPS mounts for a variety of bikes including most models of GS. Take a look at www.migsel.com . His mount positions the GPS unit up above the speedo and tacho just behind the screen so it is ideally placed to have the unit in your line of sight to avoid looking down when riding and it is also protected from the elements a lot more. I had mine on a handlebar mount on my 1100GS similar to you but the difference in the MiGSel mount is really amazing.
__________________
...on the road to nowhere...

Biking roads by bikers for bikers www.bestbikingroads.com
Reply With Quote
  #4  
Old 2 Feb 2007
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
Quote:
Originally Posted by Gecko
Nice one Alex but I beg to differ when you say it couldn't be better...
OK, I'll rephrase that. Positioning couldn't be better for ME and for the Garmin 60Cx or any other "upright" GPS. Besides, since I hardly refer to it, I didn't want my GPS "in my face".

Quote:
Originally Posted by Gecko
There is a guy who make the ultimate in GPS mounts for a variety of bikes including most models of GS. I had mine on a handlebar mount on my 1100GS similar to you but the difference in the MiGSel mount is really amazing.
The "ultimate in GPS mounts"? Well I beg to differ. I'm familiar with the Migsel mount and I would not go for it for two reasons; price and I didn't like the design for various reasons. My mount cost me €9.75 or £6.50. That is kind of hard to beat. As someone commented on one of the forums, it looks like a BMW factory item.
__________________
All the best,
Alex

Alex's BMW Motorcycle & Global Touring Page
SmugMug Site
Alps Motorcycle Tours - Priced Right


- If motorcyclists claim to be individuals, why then do so many of them ride in packs?
Reply With Quote
  #5  
Old 2 Feb 2007
Gecko's Avatar
Slippery when wet
Veteran HUBBer
 
Join Date: Mar 2006
Location: Spain
Posts: 311
Each to their own but I find having the GPS in a position where I don't have to look down and away from the road very comfortable. I tried all kinds of variations and different positions for the GPS unit but except for really bumpy off road riding the MiGSel mount won for me. When I'm off road for any length of time I move it back to the centre of the handle bar cross bar as I can angle it better for seeing when I am standing up on the footpegs.
You will find that after time the connector pins on your 60CSX will oxidize and get wet. It's not a problem if you keep an eye on it and clean the pins regularly but the added advantage of having the GPS behind the screen and protected from the elements is a good thing in my experience. When I had mine initially, a 60cs , it was exposed on the handle bars a bit like yours and when you are riding at 100km plus in rain , that rain is hitting your little GPS unit with every intention of testing it's waterproof abilities to the max..... I like the added protection of the unit being out the weather if possible.
Ride safe
Cheers
Gecko
__________________
...on the road to nowhere...

Biking roads by bikers for bikers www.bestbikingroads.com
Reply With Quote
  #6  
Old 3 Feb 2007
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Canada and the Alps
Posts: 134
Quote:
Originally Posted by Gecko
You will find that after time the connector pins on your 60CSX will oxidize and get wet. It's not a problem if you keep an eye on it and clean the pins regularly but the added advantage of having the GPS behind the screen and protected from the elements is a good thing in my experience. When I had mine initially, a 60cs , it was exposed on the handle bars a bit like yours and when you are riding at 100km plus in rain , that rain is hitting your little GPS unit with every intention of testing it's waterproof abilities to the max..... I like the added protection of the unit being out the weather if possible.
My pins appear to be gold plated. They are still as bright as the day I bought the unit a year ago.

Having the GPS behind the screen as you claim will get it wet. There is a 2 cm gap between the windshield and that silver cover under it. When I'm riding in the rain, the inside of my windshield gets wet. Not a concern really either way.

Note that the GS Adventure windscreen is larger than the regular GS windscreen. My GPS in the upright position is shielded by the edge of the windscreen. Plus my mount is probably a bit more inward than yours was.

Having seen the Migsel mount with the 60 Cx shown, sure enough, it and any other "upright" unit has to be placed lower and to the left side which partially blocks the Rider Information Display. It just looks too cluttered for my liking.

Whatever works for you and makes you happy.
__________________
All the best,
Alex

Alex's BMW Motorcycle & Global Touring Page
SmugMug Site
Alps Motorcycle Tours - Priced Right


- If motorcyclists claim to be individuals, why then do so many of them ride in packs?
Reply With Quote
  #7  
Old 4 Feb 2007
Contributing Member
Veteran HUBBer
 
Join Date: Sep 2006
Location: Ashford Kent UK
Posts: 161
used a small plastic lunch box with hole cut in it & bubble wrap inside to take the shocks worked well in the desert & was quick & cheap to make for my garmin
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
R1150 GS Driving Light Relay & AutoSwitch Install Global Rider BMW Tech 0 6 May 2006 16:07
R1150 GS Blue Sea 5025 Fuse Block Install Global Rider BMW Tech 0 6 May 2006 16:05
Y piece for R1150 GS simonrjames BMW Tech 2 28 Oct 2003 16:17
Digital: How much Memory? and Will cafes let you install dr NewMexEd Photo Forum 11 13 Jan 2003 21:14

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 21:54.