Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > BMW Tech
BMW Tech BMW Tech Forum - For Questions specific and of interest to BMW riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 18 Mar 2004
Mr. Ron's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: Vancouver, BC, for now...
Posts: 792
R100GS forks

Hello. Lots of questions today. On my '89R100GS/PD, the stock forks and brakes are, in my mind anyway, quite abysmal! Even with progressive springs, i find them acting horrible on gravel and washboard. I also feel i need to cary an ancor with me if i need to stop in time, and i haven't even loaded the bike yet!you can get valved spring sets from HPN and custom brakes and rotors from various sources, but there must be an easier way. Has anyone ever swaped the complete front end with,say a japanese heavy dirt-bike front-end? I know this can be tricky, with changes in fork-axel to steering head length greatly effecting the handling characteristics of the bike. Maybe you can fit a great set of forks with awesome brakes at the same time, killing 2 birds with 1 stone. Am i dreaming? I hate to settle with what i have right now.
Thanx!

Note: No birds were stoned in the posting of this message
Reply With Quote
  #2  
Old 18 Mar 2004
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
Ron,

Follow the thread to a good link re: upgrading the GS brakes, although I think you may have already seen it(?)

http://www.advrider.com/forums/showt...6&page=2&pp=15

Heavier oil in the forks & a revalve kit i such a thing is available?

Steve
__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #3  
Old 6 Apr 2004
Contributing Member
Veteran HUBBer
 
Join Date: Aug 2001
Location: Sicamous,Canada
Posts: 132
hi ron
glad to hear from you again if you want to go for a full on rally raid bike then 50 mm forks from hpn (www.hpn.de)
I would still get the hpn rear brake thu and then brace the frame don,t want it to snap like chris bright's in brazil or just slow down a bit

take care nobby
Reply With Quote
  #4  
Old 6 Apr 2004
AliBaba's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Norway
Posts: 1,379
The brakes are not great but if they are really bad there has to be something wrong. It also depends on what tires you use on the bike. On my bike I use MT21 and there is no problem to lock the front wheel in 120 km/h, even when I drive with luggage. I’ve also used TKC80, Avon Gripster and it gives the same result. With a more street oriented tires it might be different.
This winter I changed to a metal braided hose and the feel really improved. Off course I still have to use force on the brakes but that’s not a problem as long as I know what’s happening and I know that you can lock the wheel if I have to.

When it comes to the forks I also rebuild them this winter. After a lot of thoughts I decided to keep the bike “low” and keep the original fork-legs, mainly because I didn’t want to lift the rear and stress the shaft. So I mounted inlets (the same as HPN sells but Q-tech are cheaper, BMW also sell them).
There is still a lot of snow on the gravel roads around here so I have mostly tested them on tarmac but they feel good. It should be interesting to test them further, to try other springs, adjust them and play with the oil-level.

Rebuilding the forks is not an easy task, and the first thing to do is to know how you would like the forks to handle. All springs are different and IMHO you are lucky if you buy something without research and it fits your need…. The same applies for the hydraulic.
If you have a PD tank it will probably come in conflict with a 50mm setup. The same goes for indicators, dashboard and so on…

IMHO it’s not necessary to strengthen the frame if you don’t change the suspension to much.

BTW a friend of mine has mounted a shortened Magnum-fork on his old G/S and increased the ride height a bit in the rear. It will be interesting to see how it works when he has finished the bike.

Reply With Quote
  #5  
Old 7 Apr 2004
Contributing Member
Veteran HUBBer
 
Join Date: Aug 2001
Location: B.C. Canada
Posts: 209
Hi Ron, If you do swap your forks I'd be interested in buying your old ones for a Project I have.I'm in Revelstoke B.C.
Cheers, Peter

P.S.Have you checked out UK Gsers site, there is some good info there.
Reply With Quote
  #6  
Old 7 Apr 2004
Mr. Ron's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: Vancouver, BC, for now...
Posts: 792
Hello. Thanx for all the responces, you're all a great help AliBaba, what are the inlets that you talk about??... After long consideration, which also means a lack of "disposible income" i've decided to become cheap and creative. I'll keep the forks, but re-build them and toy around until i'm happy. As for the brakes, i'm used to doing stoppies with 2 fingers on my R-6, so my expectations will have to lighten-up!I'm looking for a 2-3 pot left caliper from some racebike with radial brakes on e-bay, something i can adapt to the fork with an aluminum plate. can anyone tell me where i can get a good 320mm. front disk for less than $300us???
Reply With Quote
  #7  
Old 9 Apr 2004
Gold Member
Veteran HUBBer
 
Join Date: Mar 2001
Location: British Columbia
Posts: 246
Mr. Ron,
As to the Brakes, I am mid-way into the modification you are speaking of:
I just had an aluminium adapter machined to go from the stock R100GS hub to a 320mm GSXR Rotor (without the stock, dished rotor carrier). I picked the rotor up at a bike wrecker for $115, it was hardly used. So far so good, but I haven't finished the project yet, so still lots to work out. I haven't settled on an appropriate caliper yet either - I'm trying to find a nice 4-pot unit that still has dust seals on the pistons, otherwise I might just stick with the stock caliper. It can be done, but requires lots of messing about. MAP engineering makes a really nice setup which I have heard good things about. I would have gone that route if I wasn't missing the rotor carrier already.
Reply With Quote
  #8  
Old 10 Apr 2004
Mr. Ron's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: Vancouver, BC, for now...
Posts: 792
Dude, we should meet for a ! Between the two of us we should come up with a more than adequate braking system for the GS. Just got back tonight from a road-trip to Prince George and back. I never thought of machining an adapter plate for the rotor also...Brilliant! Why not try the GSX/R caliper also? I read in another forum about a guy who connected the calliper to the master cyl., placing it on the rotor and clamping it on. Tie the brake lever back, then make a template of the adapter plate to the fork.


Gotta go, hockey game's on!!
Reply With Quote
  #9  
Old 10 Apr 2004
Gold Member
Veteran HUBBer
 
Join Date: Mar 2001
Location: British Columbia
Posts: 246
I'd be happy to meet up and show you what i have done so far. not a bad Idea about the caliper location - I haven't figured that out yet. Another bridge to cross! Originally I had intended to make my own adapter but time and tools (mainly tools!) did not permit. I ended up contacting a couple of biker/ machinists in Victoria who did a fine job based on what I told them. They still have the computer drawings if you like...... I paid them $300 total for their end and am please with the quality.

I do get to Vancouver once a week or so. send me an email off list and I will give you my number. Happy to talk over a some evening.

------------------
Reply With Quote
  #10  
Old 10 Apr 2004
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
Quote:
Originally posted by Mr. Ron:
I read in another forum about a guy who connected the calliper to the master cyl., placing it on the rotor and clamping it on. Tie the brake lever back, then make a template of the adapter plate to the fork.
Ron,

I think you're refering to a posting of mine on the ADR Riders site a couple of weeks ago?

Works every time for me. The only time I've spent money re-mounting calipers is to get 4 spacers machined on a lathe. I now have my own lathe.

The other way, that looks more profesional IMHO, is to use a 1"+ thick of aluminium & make a 3 dimensional carrier that requires no spacers but this requires a decent mill & operator, hence it can be expensive.

Re: template. I use thick cardboard (lever arch files are good) & make the template in two halves. One half bolted to the fork leg & the other half bolted to the caliper. Once I'm happy with the positioning of all parts, I tape or staple the two halves together. resulting in the two sets of mounting holes in alignment with each other. I trim the template to shape & make a temporary carrier out of thin aluminium sheet, just to confirm alignment. Once I'm doubly satisfied, I make the final version out of 1/2" thick ally sheet. No special tools used, only a good jigsaw, a drill (bench drill if possible) & files & sandpaper. Just need to get the spacers made after that.

Steve

__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #11  
Old 10 Apr 2004
Mr. Ron's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: Vancouver, BC, for now...
Posts: 792
Hmmm...I have access to a full fabricating shop and even some 1 1/2" billet titanium lying around. I'm shure that would make an adequate caliper adapter! Great idea Steve, and yes, i now recall it was your post i saw in another forum. My question for you is have you fully tested your adapter with spacers? It sounds like there could be lots of room for movement, flex and viberation when using spacers instead of milling the off-set from one solid piece. Also, in regard to using a sport-bike type calliper,these are mounted radially( behind the fork-leg). I would have to use the left one from a dual-calliper system and turn it around to mount it to the right front fork-leg on the GS. When the brakes are applied on radial systems, the callipers are under compression, applying the load directly to the fork-leg. When i flip the calliper around, the calliper is under tension when the brakes are applied. A calliper with very heavy castings and lots of material around the bolt-holes must be chosen so that it isn't torn apart under heavy braking (Verrrryyy Baaaddd!!) I post this only in theory not having tried this yet, what are your thoughts?
Reply With Quote
  #12  
Old 13 Apr 2004
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
I always mount the caliper behind the fork legs because the bikes I've worked on have been designed that way.

I covered over 40,000 miles on my DR600 fitted with an FZR600 f/wheel, FZR1000 320mm disc & a Nissin 4-pot caliper from a GSX-R. There may well be a tiny degree of flex when using spacers but none that I've noticed. My pads wear evenly & don't jam in the caliper. I've nevernoticed any vibration. I also fitted ISR calipers to my GSX-R & 1100EFE calipers to a GSX750EF for a friend.

One thing to note that I learned from my DR experience: Where possible, use the matching caliper for the disc you're using. On my DR set up, I have to grind a slight bevel on the bottom of the pad material so that it clears the disc mounting buttons. At least check in advance that that the pad clears the buttons when aligned with the top edge of the disc, not a huge hurdle but a potentail problem you can eliminate at the design stage. I used a GSX-R caliper because that's what I had & I did not want to use the Sumitomo caliper as fitted to FZR's as they have no dust seals fitted.

Machining from a large billet is the way to go if you have the facilities (& skill - big power tools take no prisoners, as we say here in Oxford.....) It may be an idea to make a mock up first, using spacers etc to ensure alighment etc before proceeding with the final version?

Good luck

Steve

__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #13  
Old 13 Apr 2004
Registered Users
New on the HUBB
 
Join Date: Jan 2004
Location: madrid
Posts: 13
and what about the master cilinder, do you need to change it too with a four pistons caliper?
Reply With Quote
  #14  
Old 13 Apr 2004
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
I'd stick with the current m/cylinder for the moment. Although the stock GS caliper only has two pistons, they're two large pistons opposed to 4 small ones.

I tried a 5/8" FZR1000 m/cyl on my DR & it was crap, no lever travel at all, like squeezing a piece of wood. Now use a Honda 1/2" m/cyl & it provides more travel & a lot more feel.

It's all about comparative surface areas of the respective pistons in the m/cylinder & the caliper itself.

I have manuals for both the GSX-R & the GS. I'll dig out the respective caliper piston sizes later & post them here for you to work on.

Steve
__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #15  
Old 14 Apr 2004
Grant Johnson's Avatar
HU Founder
Veteran HUBBer
 
Join Date: Dec 1997
Location: BC Canada
Posts: 7,216
Be prepared to change master cylinders, although you MAY not need to.

When I installed a 4 piston caliper on my G/S, I had to change masters. Then when I installed a 6 piston caliper, I had to change again.

As Steve notes, if it's wrong it can be "wooden" - or if wrong the other way the lever just comes into the bar.

BMW has masters available in 1mm increments from I believe 11 to 16 mm. I now have 4 of them...

------------------
Grant Johnson

Seek, and ye shall find.

------------------------

One world, Two wheels.
www.HorizonsUnlimited.com
__________________
Grant Johnson
Seek, and ye shall find.

------------------------
Inspiring, Informing and Connecting travellers since 1997!
www.HorizonsUnlimited.com
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 12:58.