Horizons Unlimited - The HUBB

Horizons Unlimited - The HUBB (https://www.horizonsunlimited.com/hubb/)
-   BMW Tech (https://www.horizonsunlimited.com/hubb/bmw-tech/)
-   -   bmw gs1150gs, 2001 (https://www.horizonsunlimited.com/hubb/bmw-tech/bmw-gs1150gs-2001-a-71035)

outdooredjim 28 Jun 2013 00:04

bmw gs1150gs, 2001
 
ok, new to the adventure bike :)
been biking since I was 12, now 48 !! :(
ran my own bike shop, worked in bike shops, for many years.
bmw hight !!!! lol
iv read many threads ! oilins , wp, showa, im 5ft6 , 29ins leg. iv managed 3 rides out on the bm, and all good. tip toe ! but all good :)
but im working to get it lower, and will post as I go.
I did take 1ins out of the seat and stapled the cover back ! staple gun £8.00 local shop. much cheaper than a new seat ! now looking at mods to suspension.
jim :smiliex:

outdooredjim 1 Jul 2013 23:44

shoker
 
Quote:

Originally Posted by outdooredjim (Post 427610)
ok, new to the adventure bike :)
been biking since I was 12, now 48 !! :(
ran my own bike shop, worked in bike shops, for many years.
bmw hight !!!! lol
iv read many threads ! oilins , wp, showa, im 5ft6 , 29ins leg. iv managed 3 rides out on the bm, and all good. tip toe ! but all good :)
but im working to get it lower, and will post as I go.
I did take 1ins out of the seat and stapled the cover back ! staple gun £8.00 local shop. much cheaper than a new seat ! now looking at mods to suspension.
jim :smiliex:

ok,you can buy new springs for around £100 each, but all the reviews are saying you don't get it much lower !!

ps, still working well months later. even two up, with luggage, and still handles really well :)

iv now striped the rear shocker, BMW shaowa .
I have taken 1 ins of the top of the rear shocker spring, ie the tightly spun bit at the top ,so as to have a flat edge. it fitted back nice and tight .seated properly. and is working fine .I still have the adjustment of damping ,and ride height.
its been pushed hard in the bends and handles fine. so, it can be done cheaply, and with good results, id like to explain ,I have worked on bikes for many years, so if you are not competent, then:thumbup1: get it done at a garage.


All times are GMT +1. The time now is 14:48.


vB.Sponsors