Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > BMW Tech
BMW Tech BMW Tech Forum - For Questions specific and of interest to BMW riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 3 Oct 2006
Nigelrojo's Avatar
Registered Users
HUBB regular
 
Join Date: Apr 2006
Location: Bath, UK
Posts: 37
BMW GS starter motor / bump starting

I had a BMW R100GS from 1990-2000, did 50,000 miles on it and the only thing that ever broke was the Valeo starter motor. This happened during a tour of the Alps. Fortunately I was able to bump start the bike and ride it to an Italian garage, where they replaced the Valeo item with a heavier, more robust Bosch motor, which never gave me problems.

2 weeks ago the Valeo starter motor on my '97 R1100GS decided to disintegrate; the magnets dislodged and sort-of mashed themselves up inside the commutator casing. It was an easy enough job to remove the starter motor, and I thought I would then simply bump-start the bike.

Bad idea. 30 minutes later I was a sweating, gasping wreck. Every attempt to bump start the bike, even with 2 blokes pushing, resulted in the back wheel locking up, even in top gear. We even tried towing the bike behind a car, which (predictably) resulted in me falling off. I had to admit defeat and call recovery. The recovery chap cheerfully stated that the only way to bump start a BMW oilhead is to have 2 people on the bike and "a big hill".

Any suggestions on how to bump start these bikes (especially on your own) would therefore be gratefully received. Maybe it simply isn't possible, I don't know. If it isn't possible, then that's not good news for folks intending to take their Beemer to the back of beyond. IMHO all bikes should either have a kickstart or be bump-startable.

Also, does anyone know if a properly engineered Bosch starter motor is available for BMW oilheads? Despite having just fitted a new Valeo (it works fine) I simply don't trust them any more.

Nigel
__________________
Moto ergo sum
Reply With Quote
  #2  
Old 3 Oct 2006
Registered Users
Veteran HUBBer
 
Join Date: Sep 2003
Location: Estonia
Posts: 787
Talking

This is how the french (Valeo) build starters - gluing the magnets inside

I've heard one similar case as well when the magnet's have comed loose. You only need to glue them back and it works as new.

Push-starting the bike, i haven't got a need for it yet, but i think you need to do it in 3rd, 4th or even 5th gear, depending if you have any hills or a loose surface, the worst. Engine braking is massive on oilheads. Ignition on, clutch engaged you need to push a good human running speed, then jump on and on 4th it should get enough to turn the engine. Clutch release is another trick, doing it slowly usually can block the rear wheel on lower gears, takes some practice.
Oldschool experienced motocross riders did it like this - run a good speed with the bike cluch engaged, jump on then quickly stand up (or even jump up if you can) on footpegs and "freefall" your butt into the seat as far rear as you can at the same time rapidly releasing clutch, then the rear wheel gets enough traction from your (over-)weight not to block and turn the engine, useful especially on the loose surface

My home garage has about 2 metre quite steep drop down, sometimes i start there on 4th with only igition on. Or in the very cold days to give enough voltage for ABS to sart without using the starter.
Reply With Quote
  #3  
Old 3 Oct 2006
Gecko's Avatar
Slippery when wet
Veteran HUBBer
 
Join Date: Mar 2006
Location: Spain
Posts: 311
I reckon that by removing the starter motor you have done something to the electrical circuit so as to make it impossible to start. I've towed and started a couple of oilhead Beemers in my time, most recently a 1200GS and normally 3rd or 4th gear, like Margus says is all you need.

Dontcha love it when the new bikes break down and have to be rescued by the old ones
Attached Images
 
__________________
...on the road to nowhere...

Biking roads by bikers for bikers www.bestbikingroads.com
Reply With Quote
  #4  
Old 4 Oct 2006
Mr. Ron's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: Vancouver, BC, for now...
Posts: 792
If you want to replace the starter, i would recomend one of these. Their lighter, use less amps and are a repairable Japanese design found on most Toyota's. An excellent upgrade in my opinion!
http://www.motoelekt.com/
Reply With Quote
  #5  
Old 13 Oct 2006
Nigelrojo's Avatar
Registered Users
HUBB regular
 
Join Date: Apr 2006
Location: Bath, UK
Posts: 37
Thanks guys, some excellent info there.
Nigel
__________________
Moto ergo sum
Reply With Quote
  #6  
Old 9 Jun 2011
Registered Users
New on the HUBB
 
Join Date: Jun 2011
Posts: 1
Bump on one plug

I am only 75kg's and have bump started my R80RT on flat ground by removing one spark plug. The bike will start in second gear and will run on one plug.
While the bike is still running replace the plug and lead.

No problem. Hope this helps
Reply With Quote
  #7  
Old 9 Jun 2011
Registered Users
Veteran HUBBer
 
Join Date: Oct 2002
Location: Stockholm - Sweden
Posts: 317
I have read that some have succeeded in push-starting the old 1000cc, even the 9.5:1 engine modell. My personal experience matches that of yours with your 1100 oilhead = defeated by the bike.

Solution in my case:
- bosch starter motor and jumper-cables.

Do not think there is space enough for an old bosch starter on the oilheads... if there is, the bosch starter would be the way to go.

As for my R80 - sure. No problem in push-starting it. Had to do it several times. Darn tricky when the skiis are mounted (!), but can be done. Even with about 10.3:1 compression-ratio it was fairly ease to push-start. But the 1000cc engine... shear impossibility ...

It's been 5 years since your posting. How did the situation resolve, and what did you do about the starter-motor-question?
__________________
Drive Safely,
Albert
Reply With Quote
  #8  
Old 9 Jun 2011
Registered Users
HUBB regular
 
Join Date: Jan 2011
Location: Les Cedres, Qc, Canada
Posts: 27
To get good information on starters, I would go there instead of Motoelekt:

Valeo and Bosch Original Equipment New Starters and Service Parts

If you can't jump start a motorbike, forget the kick start... On airhead, kickstarting the engine is only possible on a perfectly tuned engine. Considering the greater displacement and higher compression on a oilhead, a kick would be useless. I can start my R90S with a kick but I think I'm at the limit of kisckstart possibilities.

The Valeo starter was a great starter: light, very powerful and low demanding on the battery. You have the possibility to replace it by a Bosch or just change the magnet housing for a new model with retaining clips. The glued-magnets were the only problem of the Valeo and it has been fixed now (unfortunately too late for the airhead production). The new magnet housing can be bought from here: Valeo - Starter Magnet House [clockwise]
__________________
Fred, Airhead Lover
BMW R90S 74 & R100GS 93, Ural Patrol 06
Reply With Quote
  #9  
Old 21 May 2013
Nigelrojo's Avatar
Registered Users
HUBB regular
 
Join Date: Apr 2006
Location: Bath, UK
Posts: 37
Quote:
Originally Posted by dc lindberg View Post
I have read that some have succeeded in push-starting the old 1000cc, even the 9.5:1 engine modell. My personal experience matches that of yours with your 1100 oilhead = defeated by the bike.

Solution in my case:
- bosch starter motor and jumper-cables.

Do not think there is space enough for an old bosch starter on the oilheads... if there is, the bosch starter would be the way to go.

As for my R80 - sure. No problem in push-starting it. Had to do it several times. Darn tricky when the skiis are mounted (!), but can be done. Even with about 10.3:1 compression-ratio it was fairly ease to push-start. But the 1000cc engine... shear impossibility ...

It's been 5 years since your posting. How did the situation resolve, and what did you do about the starter-motor-question?
Hi Albert,

It's been over 6 yrs since my post and a couple since yours. I ended up buying a replacement Valeo motor and later selling the bike (I now have a 2008 1200GS). Anyway, last month the Valeo starter on my '98 Guzzi Cali EV started playing up. I took the end cap off and saw a pile of rust; the brush holding spring was rusted right through. There seemed to be no seal of any kind to keep water out. At least this should be a quick fix, ie replacement of the srping & brush kit.

Nigel
__________________
Moto ergo sum
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Noisy starter motor Mark Yamaha Tech 3 1 May 2004 05:03
Starting problems lost1 KTM Tech 0 15 Jan 2004 01:24
starter problems montana traveler KTM Tech 1 6 Feb 2003 06:56
STarter Motor Problem?? OXXT Yamaha Tech 2 22 Jun 2002 16:52
R80G/S Starter randomly engaging wbagwell BMW Tech 2 17 Sep 2001 07:39

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 18:59.