Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > BMW Tech
BMW Tech BMW Tech Forum - For Questions specific and of interest to BMW riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11 Feb 2005
Gold Member
Veteran HUBBer
 
Join Date: Mar 2004
Location: Gwynedd, Wales, UK
Posts: 259
Cast iron replacement discs, '82 airhead

As my front discs are badly grooved I've ordered a pair of cast iron replacements from Moto Works. Am I doing right?

They can't be any worse than the stainless originals (not as pretty and shiny, true.) I'm getting Ferodo FDB108P pads to go with them. Actually, they did offer newer, more expensive, pads to go with them but since I've ridden the last 100,000-plus miles on crap brakes I do have reservations about braking too hard banked over (come on, most of us do it) and doing a whoopsie before I'm used to brakes that really work.

John
__________________
Johnef
Reply With Quote
  #2  
Old 11 Feb 2005
Registered Users
New on the HUBB
 
Join Date: Dec 2004
Location: Lancashire, UK
Posts: 12
I've got the PFM cast iron disc (also goodrich braided hose)on my R80ST, originally had the Ferodo pads fitted, but now using the EBC HH pads, a slight improvement.
Reply With Quote
  #3  
Old 11 Feb 2005
Gold Member
Veteran HUBBer
 
Join Date: Mar 2004
Location: Gwynedd, Wales, UK
Posts: 259
Hi, fatal.

Thanks for that. Yes, mine are (will be) PFM too, but I didn't go for the Goodrich hoses, as all of a sudden time has all gone (what- AGAIN???) and all my plans for making up both hoses and pipes have been dumped and I've just gone and got myself a set of BMW hoses again.

Tell me, how do the discs work- you are happy with them, yes?

John

PS Have just re-read your reply. You said 'slight improvement,' I took it you meant the PADS were a slight improvement, but perhaps what you were saying was that the disc and pad combination were an improvement. Sorry, I see what you mean. Thanks again.
J

[This message has been edited by John Roberts (edited 11 February 2005).]
__________________
Johnef
Reply With Quote
  #4  
Old 11 Feb 2005
Mr. Ron's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: Vancouver, BC, for now...
Posts: 792
...Hey guys, if you haven't already, read this thread:http://www.stoptech.com/whitepapers/...otors_myth.htm
This has some useful info on breaking in new pads and rotors. It applies to motorcycles as well as cars. This ling is in the bike-tech section to the left.
Good luck!
Reply With Quote
  #5  
Old 25 Sep 2008
Registered Users
Veteran HUBBer
 
Join Date: Oct 2002
Location: Stockholm - Sweden
Posts: 317
YES!
I've been using MW cast iron discs for over a decade on all my bikes. Fully floating of cause.

How has they worked for you since your posting in 2005 ?
__________________
Drive Safely,
Albert
Reply With Quote
  #6  
Old 4 Feb 2010
Gold Member
Veteran HUBBer
 
Join Date: Mar 2004
Location: Gwynedd, Wales, UK
Posts: 259
Quote:
Originally Posted by dc lindberg View Post
YES!
I've been using MW cast iron discs for over a decade on all my bikes. Fully floating of cause.

How has they worked for you since your posting in 2005 ?
Sorry, it took a little while for me to see your reply, I'm a lot happier with them, but recently they seem to bind on one part of one of the discs, a thin layer of corrosion seems to have spread from the outer edge of the disc to the actual braking surface, as it's on the inner face of the disc it's rather difficult to clean/scrape off. It is shiny and black in appearance and it's essential to clean it off completely without leaving an edge which would chew up the pads with every turn of the wheel.

I would be very interested to know if anyone else has had this problem with cast discs. Someone suggested applying the brakes very hard ocasionally, well, they get applied hard on a regular basis anyway.

As things are I haven't ridden the bike much in the past few weeks as I've had an operation including a skin graft on the palm of my hand for Dupuytren's Contracture so no more biking for a few more weeks by the look of things. I'll write an update as and when.

PS, I've just noticed you said yours are fully floating and that in your profile you have an R/RT, is that an airhead? If so how did you manage to fit them?
__________________
Johnef

Last edited by John Roberts; 4 Feb 2010 at 19:09. Reason: PS added
Reply With Quote
  #7  
Old 4 Feb 2010
Jake's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Mar 2005
Location: Northumberland, uk
Posts: 761
Hi John, depending on what you are willing to spend, I can let you know on the brake set up i have fitted to my GS, I fitted a cast iron pfm but spent money on a Harrison Billet 6 pot mini brake for the front. The Harrison 6 pot really makes a huge difference and will haul the gs 2 up fully loaded down in total control in wet or dry. Its only problem is it does need regular cleaning or you can get uneven wear and drag on the pads. Replacement pads are also pretty expensive.
I also fitted a HPN rear drum brake conversion again expensive - this gives different brake shoes (different shape and material, and a different cam which means the back brake works. I mean really works well almost as good as a modern disc set up (well nearly as good with some imagination). But together the two brakes work excellent and are well up to modern bike standards.
seems the saying yer pays yer money and .........
is right in this instance.
tchus.
Reply With Quote
  #8  
Old 4 Feb 2010
Gold Member
Veteran HUBBer
 
Join Date: Mar 2004
Location: Gwynedd, Wales, UK
Posts: 259
Hi, Brian,

Thanks for that, but I have to remember that it's an R100RS that I have after all, and of pretty modest performance compared to modern bikes, alas. Having said that, though, your set-up does sound very interesting, perhaps you could post us a picture if you have one handy?

The reason I was asking about dc lindberg's fully-floating set up was that I was interested in the engineering aspect, how it all fitted on R100RT (if that is what he has) forks and hubs.

Hwyl fawr!
__________________
Johnef
Reply With Quote
  #9  
Old 5 Feb 2010
Registered Users
Veteran HUBBer
 
Join Date: Oct 2002
Location: Stockholm - Sweden
Posts: 317
Hi John,

Am unable to upload pics... "your quota is full"...

MW's cast discs, fully floating, is strickly bolt on. One detaches the old once, send them back for a generous "refound" and bolt on the -new- fully floating.

Stock brembo calipers are used but can of cause be swapped for better or worse calipers.

There are German options with s/s discs.
I prefer the cast iron since these are as good (or bad...) in all kinds of weather; so one does not encounter surprices due to sudden rain or dryness, sleat or snow.

I have these discs on my 1984 R80/7, 1982 R100/RS-RT, and will have such also on my R100RT 1981.
Fits all with cast iron R75 and on.
__________________
Drive Safely,
Albert
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 21:07.